Professional Documents
Culture Documents
www.hydrostaticpumprepair.net
Phone: 800-361-0028
Email: sales@hydrostatic-transmission.com
Data Sheet
Features
Designed for Quality and Reliability Greater Total Efficiency Expanded Functionality
• Uniform design concept across frame • Increased pump efficiency • PLUS+1® Compliant control and
sizes • Lower control pressure for less power options
• Single piece housing to minimize leaks consumption • Easy integration with Telematics
• Technologically advanced kit and servo • Integrated Flushing valve available
system Control Options (28/32 and 38/45)
• Predictable, low friction swashplate
• Electro-hydraulic control options
bearing for precise machine control Modularity
include
‒ Electrical Displacement Control (EDC) • Common control, charge pump and
Machine Integration Benefits ‒ Forward-Neutral-Reverse (FNR) auxiliary pad options
• Industry leading pump length ‒ Non-Feedback Proportional Electric • Easy and quick conversion to the right
• Clean side for easier machine (NFPE) configuration
integration • Manual displacement control (MDC)
• Metric and Inch O-ring boss and Split • Non-Feedback Proportional Hydraulic
flange (38/45 only) system port (NFPH) Comprehensive technical literature is
interfaces • Common control across entire family online at www.danfoss.com
• Standard connection interfaces
Operating parameters
Features Unit 28/32 38/45
Minimum 500 500
Input
Rated min-1 3400 3300
Speed
Maximum 4000 3900
Max. working pressure* 350
System
Max. pressure bar 380
Pressure
Min. low loop 10
Case Rated 3 P400333
bar
Pressure Maximum 5
* Applied pressures above maximum working pressure requires Danfoss
application approval.
Dimension
103 ± 1.5 103 ± 1.5 55.6 ± 0.8
28/32 cm3
168.3 ± 2.5
20.8 ± 0.5
60 ± 0.8
Ø101.6
41.2 ± 0.8
54.5 ± 0.8
87.4 ± 1.5
15 ± 0.5
2x Ø 24 Max.
60.6 ± 0.8 Screw head/washer 2x 73 ± 0.4 137 ± 1.2
2x Ø14.3
146.5 ± 1.2 clearance 206 ± 2.5
84 ± 1.5
12 ± 1
Ø101.6
54 ± 1.5
90.7 ± 1.5
21 ± 1
24 ±1
2x Ø 24 Max.
104 ± 1.5 Screw head/washer 2x 73 ± 0.4 2x Ø14.3 181 ± 2.5
clearance 230.7 ± 2.5
160.4 ± 2.5
P400350
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.