Professional Documents
Culture Documents
Overview Features
These fire alarm call points • UL listed for USA and Canada • Marine grade alloy or stainless
have been designed for the (SM87PBL only). Class I, Div 1, steel
Groups C & D
most arduous environmental • Robust yet lightweight
conditions. • ULC certified (SM87PBL only) for
Class I, Zone 1 Groups C & D • Easy to maintain
The units are both easy to • CSA certified *Depending on version
install and maintain.
• IP66 & 67
Versions of this model are • Certified temperature*:
available with various options
–67ºF to +158ºF
including an addressable
module. A choice of either –55ºC to +70ºC
marine grade alloy or stainless
steel (version dependent).
European, Russian, Chinese
and other worldwide approvals
are available.
Eaton
Unit B, Sutton Parkway
Oddicroft Lane
Sutton in Ashfield
United Kingdom © 2021 Eaton
NG17 5FB All Rights Reserved
Printed in UK Eaton is a registered trademark.
T: +44 (0) 1623 444 400 Publication
www.crouse-hinds.com/hac No.DSMU0001/C All other trademarks are property
MEDCSales@Eaton.com February 2021 of their respective owners.
All specifications, dimensions, weights and tolerances are nominal (typical) and Eaton reserve the right to vary all data without prior notice.
No liability is accepted for any consequence of use.
Certifications General arrangement drawing (all dimensions in inches)
Certification UL listed for USA and Canada SM87 BG
CSA Certification:
I.S. Version – Class 1, Groups A, B, C, D OPTIONAL
L.E.D
Ex d Class I, Div 2 Group D
Enclosure type 4, Cert. No. 2689075 4-3/4" L R 4-1/8"
American Bureau of Shipping Type Approval SM87PBLAUL only CRS
Specifications OPTIONAL
TAG LABEL
Optional indicator A red high intensity LED can be fitted for alarm indication 4-3/4"
As standard the LED is not provided with over current protection. The
4-1/8" CRS 3-7/16" (A)
forward current (If) should be limited to 20mA Ø3/8" FIXING HOLES
4 - POSITIONS
3-3/16" (S)
DUTY LABEL
T
Certified temp UL/ULC: –40ºF to +158ºF (–40ºC to +70ºC)
–4ºF to +131ºF (–20ºC to +70ºC) LED version only
Ingress protection IP66 & 67, SM87PB IP68 (35m for 40 hours)
Entries Up to 4 x 1/2” or 3/4” NPT
Stainless steel version comes with two entries as standard. 1-7/16" (A)
B
Units ordered with a single entry ordering code are supplied with 2x 1-3/16" (S)
Ordering requirements
The following code is designed to help in selection of the correct unit. Build up the reference number by inserting the code for each component into the appropriate box.
Unit Model Material Certification Entries Duty label Tag label Options Finish
SM87
DSMU0001/C 02/21