Professional Documents
Culture Documents
Technical specification:
2. Maintenance
open indication
close indication
H:\Service\Tools\Hilfefax +
Anleitungen\Ventil\actuator\HOHAC\HOHAC_Connection_da.doc
HOPPE Bordmesstechnik GmbH
Adjustment for
close position from Butterfly open position from butterfly
In order to adjust the open or close position of a valve please remove the cover nut for open or
close position and turn out the Allen screw for piston adjustment. Attention: do not turn out
more than 4 turns. If not possible to change the position of butterfly, please be so kind and use
the following instruction for change the position of the swivel bolt.
Adjustment of closing position from Butterfly, if it’s not possible with the adjustment from
the piston adjustment screw.
Turn Out the 4 pcs 8mm Allen screws from the cover as shown in the picture below
H:\Service\Tools\Hilfefax +
Anleitungen\Ventil\actuator\HOHAC\HOHAC_Connection_da.doc
HOPPE Bordmesstechnik GmbH
If you have removed the cover, please be so kind and remove the swivel bolt.
Turn the swivel bolt for 1 tooth and insert the swivel bolt again
Mount the cover again and after that adjust the closing of butterfly to correct close position
H:\Service\Tools\Hilfefax +
Anleitungen\Ventil\actuator\HOHAC\HOHAC_Connection_da.doc