Professional Documents
Culture Documents
( TOP )
3.0”
(76.2 mm)
INPUT OUTPUT
( BOTTOM )
The Iso•Max PO-XX is a single channel output isolator for both balanced 0.5”
and unbalanced signals where extreme signal handling is required to drive (12.7 mm)
The design begins with an extruded aluminum case that comes standard
2.625”
with gold plated XLR connectors. Plug and play easy to use, this passive in- (66.7 mm)
terface does not require any power to work. Inside is a high performance 1.5”
nickel core Jensen transformer that is able to withstand signals in excess of (38.1 mm)
0.375”
+26 dBu without discernible distortion while delivering a linear response (9.5 mm)
to 150 kHz. This provides galvanic isolation between the input and output
to eliminate hum and buzz caused by ground loops, rejecting noise by as 2.645”
much as 110 dB. (67.2 mm)
All Holes = 0.156” (3.96 mm) DIA x 0.3” (7.62 mm) 82 Degree C.S.
Made to accommodate both balanced or unbalanced signals, simply
connect the PO-XX at the output of the source and the PO-XX will quietly
go to work as it delivers exceptional audio performance. This makes the
Iso•Max PO-XX a superb choice for the most demanding studio, broadcast
and performance venue installations.
Connector options
The PO-XX comes standard with XLR input and
output. It is also available special order with the fol-
Applications lowing connector configurations for use with both
balanced and unbalanced systems.
PO - XX PO - XB
LONG CABLE PO - RR PO - RX
LONG CABLE
PO - XR PO - PP
PO-XX with a PA system Isolating one console from the other
Eliminating noise in a PA system can Whether you are isolating two consoles
sometimes take hours of trouble shoot- in a festival or experiencing noise when XLR-F IN, RCA OUT 1/4” TRS IN / OUT
ing, particularly when the mixer, amplifiers connecting to a drive rack, the PO-XX is
PO - XP
and speakers are distanced apart. Simply easily inserted into the signal chain to
connect the PO-XX at the output of your break the ground loop and eliminate
mixer to instantly eliminate ground loop noise as it easily handles huge bass
XLR-F IN, 1/4” TRS OUT
hum and buzz. transients without distortion.
+23 dBu
0.1 600 Ω
0.1
150 Ω
0.01
0.01 +14 dBu
0Ω
+4 dBu
0.001 0.001
20 200 2K 20K -40 -30 -20 -10 -0 +10 +20 +30
REFERENCE LEVEL RESPONSE AMPLITUDE (dB) vs FREQUENCY (Hz) DEVIATION FROM LINEAR PHASE DEVIATION (Deg) vs FREQUENCY (Hz)
+1 +5
+4
REF
+3
-1 +2
-2 +1
0
-3
-1