Professional Documents
Culture Documents
dynapac.com| 1
PAGE
Twin Drum Roller Forward Plates Rammer Reversible Plates Cutter Rollers
DTR DFR DR DRR DCR50 CC1250 & CC125
2 | PAGE PAGE |3
DOUBLE
to enable easy and fast technology.
operation.
POWER
Technical Data Features
Dual amplitude
Masses
Vibration and throttle regulation on the steering rod
Operating mass, kg 740
Infinitely variable speed control
Maximize savings by minimizing the passes Basic mass, kg 710
Hydrostatic vibration drive
Axle load, avg., kg 370
The Twin Vibration Technology (TVT) on the DTR75D features
Traction Hydrostatic travel drive
vibratory elements in both drums. As both the drums are used
Safety control including automatic parking brake
actively for compaction the number of passes can be reduced saving Speed 1/ Speed 2, forward/reverse, km/h 5.9 / 2.5
time & money. TVT also ensures a uniformly compacted surface. Max. gradeability without vibr./with vibr., % 40 / 35 Height adjustable and low vibration steering rod
Engine shuts down automatically in case of low oil preventing Centrifugalforce (front/rear), kN 25/13 Water sprinkler system, adjustable
breakdowns and repair costs. Nominal amplitude (front/rear), mm 0.50/0.25 Two scrapers for each drum
Vibration frequency, Hz 63/63
Warning signal at low oil level
Engine
Powerful hydrostatic drive Manufacturer/Model Kohler KD15-440
Electric and recoil starter
Hour meter
In order to deliver high operating speed, the Type Air cooled, diesel
One point lift
Twin Vibration Technology is aided by Power 6.3 kW @ 3000 rpm
hydrostatically driven drums. The hydrostatic Fuel consumption /h, avg., l 1.6
drive known for its efficiency provides power to Fuel tank capacity, l 4.3
Water tank capacity, l 60
move fast climb easy. both drums helping the roller climb steep slopes
with ease. Dimensions
A. Wheelbase, mm 500
B. Width / W. Drum width, mm 720
C. Clearance, mm 210
Great results D. Drum diameter, mm 400
Continuously variable speed control ensures a H / H1. Height, mm 1100 / 1700
smooth surface. Uniformly compacted surface is K. Ground clearance, mm 155
guaranteed thanks to the Twin Vibration Tech- L / L1. Length, mm 2030 / 2130
O. Overhang, mm 35
continuous TVT nology
speed control S. Drum shell thickness, mm 8
W. Drum width, mm 650
4 | PAGE PAGE |5
BUILT TO
Clay Silt Sand Mixed soil Gravel Rockfill Asphalt
DFR
Technical Data DFR8 DFR10 DFR14D Features DFR8, DFR10, DFR14D
Foldable steering handle with vibration isolation
Engine
Manufacturer/Model Honda GX 160 Honda GX 160 Greaves 1520
Emission according to EU Stage V EU Stage V EU Stage V
Air cooled, Air cooled, Air cooled,
Max Uptime Min Cost Operating Comfort Type
Petrol Petrol diesel
4.1 kW @ 3,600 4.1 kW @ 3,600 3.72 kW @ 3,600
Power
The tubular frame protects Heavy duty base plate Operator fatigue is reduced rpm rpm rpm
the power-pack against that offers excellent wear by vibration dampened Fuel tank capacity, l 3.6 3.6 3.6
damages from tough job resistance. handle. Dimensions DFR10 & DFR14D
conditions.
H. Height, mm 650 580 720
Protected from the sand Foldable handles that save H1. Height, mm 900 621 670
Puncture proof transport and stones, fully enclosed space, one point lift and H2. Height, mm 904 930
wheels. belt drive maximizes the life transport wheels help move L. Length, mm 550 634 634
time of components like the the equipment with ease. L1. Length, mm 790 864 930
V-belt. W. Basic plate width, mm 350 500 500
6 | PAGE PAGE |7
KEEP GOING,
NO MATTER
binder / base
DR
WHAT!
Technical Data Features
Low vibration handle
Engine
Manufacturer/Model Honda GX 100
Type Air cooled, gasoline
engine from potential damages with the help of low-oil level handles ensure fatigue free Dimensions
in the construction site. warning. operation by reducing theD.ONE B. Width, mm 350
strain on the hands. H. Height, mm 1,030
The knob to stop the engine The metal covers keep the L. Length, mm 728
cuts off the fuel supply at the engine protected along with One point lifting hook enable L1. Length, mm 335
same time. Thus,even if the air & fuel-filters. you to move the unit around W. Basic shoe width, mm 280
rammer stays flat - during easily.
transport or at the jobsite - it
can be started right away in the
up-right position.
8 | PAGE PAGE |9
DRR
Technical Data DRR20 DRR20D Features DRR20, DRR20D
Control handle with vibration isolation
Engine
Max Uptime & Min Safe, Convenient & Self Cleaning Plate Manufacturer/Model Honda GX 200 Hatz 1B20
Emissions according to EU Stage V EU Stage V
Costs Practical Type Air cooled, Petrol Air cooled, diesel
4.1 kW @ 3,450 3.3 kW @ 3,450
When it comes to larger Vibration dampened control Open style construction of Power
rpm rpm
areas, the powerful DRR’s lever features reverse drive the heavy duty base Fuel tank capacity, l 3.6 3.6
from Dynapac are ideal protection. Thus operator is reduces the maintenanceD.ONE
Dimensions
for the job – traction and kept safe from getting caught cost. As the stones
compaction made easy. between the don’t get stuck, wear and H. Height, mm 690 750
Extreme conditions are equipment and any other tear of parts are H1. Height, steering rod (lowered), mm 1,140 1,140
H2. Height, steering rod (raised), mm 1,150 1,150
easily dealt with, thanks to object like a wall. minimized.
L. Length, mm 710 710
their rugged design and all- L1. Length, mm 1,230 1,230
around protection cage. Control lever can be safely W. Basic shoe width, mm 500 500
secured during transport and
operation.
10 | PAGE PAGE | 11
BUILT TO LAST
Four banded cogged V-belt
Cutting section
All around protection for V belt
Diamond blade, max., mm 500
Lifting hook
Max. cutting depth, mm 185
Spindle diameter, mm 25.4 Recoil starter
Water tank capacity, l 40
Engine
Manufacturer/Model Honda GX390
Emissions according to EU Stage V
Type Air cooled, Petrol
Power 9.6 kW @ 3,600 rpm
Fuel tank capacity, l 6.5
Dimensions
H. Height, mm 1,115
L. Length, mm 1,176
L1. Length, mm 1,520
W. Width, mm 585
Diameter
350 mm ○
400 mm ○
450 mm ○
Vibration dampened All around cage keeps the Equipped with diamond cutter, which ■ Standard ○ Optional
handles ensure fatigue free engine package safer ensures high quality cutting operation
operation by reducing the for road beside concrete and asphalt.
strain on the hands. Extreme wear resistance results in
increase in life span, there by reducing
One point lifting hook and the operating cost.
wheels enable you to move
the unit around easily. The higher velocity of blades ensures
low noise, vibration and pollution
making it environment friendly.
12 | PAGE PAGE | 13
BUILT TO
COMPACT
CC1250/CC125
Technical Data CC1250 CC125 Optional CC1250 CC125
Mirror assy ■ ■
Compaction
Static linear load (front/rear), kg/cm 11.66 / 13.3 12.5 / 13.3
Nominal Amplitude, mm 0.5 0.5
Centrifugal Force, kN 27 27
Vibration Frequency, Hz 58 58
Dynapac’s New articulated compact tandem roller CC1250 & CC125 is designed for compaction on city
Engine
street, where size and noise matter most. The new rollers have an operating weight range up to 3,000 &
Manufacturer/Model Kubota D1703-M Mahindra 275DI
3,100 kg. These model features an improved design and new engine, which is quieter than ever. Dynapac Type Water cooled, Diesel Water cooled, Diesel
has created this roller with both the operator and quality roads in mind. Power 26.1 kW (35 hp) @ 28.7 kW (39 hp) @
2,800 rpm 2,600 rpm
Fuel tank capacity, l 50 50
Max Uptime & Min Safe, Convenient & Operating Comfort Dimensions
14 | PAGE PAGE | 15