Professional Documents
Culture Documents
Product Specifications
General Specifications
Temperature Performance
Operating ........................................................... 5 °C to 40 °C
Storage ............................................................... 0 °C to 50 °C
Transit ................................................................. < 100hrs, −20 °C to 60 °C
Humidity (non-condensing)
Operating ............................................................ < 90 %, 5 °C to 30 °C
< 75 %, 30 °C to 40 °C
Storage ............................................................... < 95 %, 0 °C to 50 °C
Water Ingress ........................................................ IP64X
Altitude
Operating ............................................................ < 2000 m, 6500 ft
Storage ............................................................... < 12000 m, 40000 ft
Safety ..................................................................... IEC 61010-1: Overvoltage CAT II, Pollution Degree 2
Shock and Vibration ............................................. MIL-T-28800 type III class 5, style E
Electromagnetic Compatibility (EMC)
IEC 61326-1 ........................................................ (Controlled EM Environment); CISPR 11, Group 1, Class A
Group 1 Equipment ............................................. Group 1 has intentionally generated and/or use conductively coupled
radio-frequency energy which is necessary for the internal functioning
of the equipment itself.
Class A................................................................ Equipment is equipment suitable for use in all establishments other
than domestic and those directly connected to a low voltage power
supply network which supplies buildings used for domestic purposes.
Caution - There may be potential difficulties in ensuring
electromagnetic compatibility in other environments, due to conducted
and radiated disturbances.
Emissions which exceed the levels required by CISPR 11 can occur
when the equipment is connected to a test object.
USA (FCC) .......................................................... 47 CFR 15 subpart B, this product is considered an exempt device per
clause 15.103
Korea (KCC) ....................................................... Class A Equipment (Industrial Broadcasting & Communication Equipment)
This product meets requirements for industrial (Class A) electromagnetic
wave equipment and the seller or user should take notice of it. This
equipment is intended for use in business environments and not to be
used in homes.
Line Voltage........................................................... 95 V to 132 V rms and 209 V to 264 V rms, Installation Cat II
Line Frequency ..................................................... 48 Hz to 63 Hz
Power Consumption ............................................. < 400 VA
Line Fuse: 20 mm IEC127..................................... 220/240 V: T5.0A 250 V
100/120 V: T10.0A 250 V
Warm-up ................................................................ 20 minutes
Dimensions
9500B Base Unit ................................................. 133 H x 427 W x 440 D mm (5.24 x 16.8 x 17.3 in.)
95xx Active Heads .............................................. 65 H x 29 W x 140 D mm (2.56 x 1.22 x 5.51 in.)
Weight
9500B Base Unit ................................................. 12 kg (27 lb) approx.
95xx Active Heads .............................................. 0.45 kg (1 lb) approx.
Warranty Period
9500B Base Unit ................................................. 1 year
95xx Active Heads .............................................. 3-year Active Plus CarePlan
2
Electrical Specifications
Electrical Specifications
Accuracy ................................................................ All specifications apply at TCal ± 5 °C, where Factory TCal = 23 °C.
Uncertainty includes long-term stability of 1 yr (5 yrs for frequency),
temperature coefficient, linearity, load and line regulation, and the
traceability of factory and national calibration standards. In general,
nothing further needs to be added to determine the Test Accuracy
Ratio over the instrument under calibration.
3
9500B
Product Specifications
4
Electrical Specifications
0V
0V
* = For High Edge, the Duty Cycle is different, but the specified edges correspond to those shown above.
erw160.eps
5
9500B
Product Specifications
6
Electrical Specifications
Capacitance Measurement 1 pF to 35 pF 35 pF to 95 pF
Accuracy ± 2 % ± 0.25 pF ± 3 % ± 0.25 pF
Note:
Capacitance measurement not available via 9550 or 9560 Active Head
7
9500B
Product Specifications
Leveled Sine > 100 MHz Square Signal div 1/10/100 Rising Zero Cross ---
> 3.2 GHz Square Signal div 2/20/200 Rising Zero Cross ---
Rising Edge or
Normal 1:19 Pulse Signal div 1/10/100 ---
Triangle Peak
Timing Markers
(> 10 ns)
Rising Edge or
Highlighted 1:199 Pulse Signal div 1/10/100 ---
Triangle Peak
Linear Ramp --- 1:2 Pulse Signal div 1/10/100 Start of rise or fall ---
Overload Pulse --- Step or Square Single or 100 Hz Leading edge ---
Input leakage
Auxiliary Input These functions have no related trigger output. Free running 100Hz trigger signal provided.
Input Impedance
8
Electrical Specifications
Current Function
Requires 9510 or 9530 Head and BNC Current adapter.
Amplitude .............................................................. ± 100 μA to ± 100 mA
Ranging.................................................................. Amps/div ranging 1, 2, 5 or 1, 2, 2.5, 4, 5 or continuously variable
DC
Accuracy ............................................................. ± (0.25 % + 0.5 μA)
Squarewave
Accuracy ............................................................. ± (0.25 % + 0.5 μA) @ 1 kHz
Frequency ........................................................... 10 Hz to 100 kHz
Duty Cycle and Symmetry .................................. 50 %, symmetrical about ground
Rise Time and Aberrations ................................. < 150 ns and < ± 2 % pk
LF Linear Ramp
Linear Ramp with the 9560 head is restricted to 50 Ω loads only.
Waveforms............................................................. 1 Vp-p triangle symmetrical about ground
Linearity ................................................................. < ± 0.1 % deviation over 10–90 %
Ramp Time............................................................. 1 ms, 10 ms, 100 ms or 1 s
Rising Falling
Ramp Ramp
+
0V 1Vp-p
- Flat
Alternative
Triggers
period
erw161.eps
Overload Pulse
Amplitude .............................................................. 5 V to 20 V into 50 Ω
Polarity ................................................................... Positive/Negative
Duration ................................................................. 0.2 s to 100 s (subject to pulse energy limits)
Energy .................................................................... 1.6 J to 50 J
Power in 50 Ω ........................................................ 0.5 to 8 W
Trigger.................................................................... Manual, Max Rep Rate 0.3 Hz (internally limited)
9
9500B
Product Specifications
Zero Skew
Unadjusted Skew .................................................. < ± 50 ps ch to ch
Adjusted Skew ...................................................... < ± 5 ps ch to ch
Skew Temperature Coefficient ............................ < 0.2 ps/°C
Rise and Fall Time ................................................ 450 ps (typical)
Relative Jitter ........................................................ < 7 ps p-p
Input Leakage
Open Circuit Output.............................................. Leakage < ± 50 pA
Short Circuit Output ............................................. Offset < ± 15 μV
Auxiliary Input
Signal Routing....................................................... Rear SMA input, passive and switched 50 Ω path to any Active Head
Maximum Input...................................................... ± 40 V p-p, ± 400 mA p-p
Switching Break and Make Capacity .................. ± 5 V p-p, ± 100 mA p-p
VSWR ..................................................................... < 1.2:1 (typical) to 1.1 GHz
Insertion Loss (Into 50 Ω)..................................... < 2.5 dB to 100 MHz, < 4 dB to 500MHz, < 6 dB to 1 GHz
10