Professional Documents
Culture Documents
Question #:1 A planning area can include one or more planning levels. What are the functions
of a planning level?
Answer: B D
Question #:2 Which of these conditions must be met to create a Local Member key figure?
Answer: D
- Production takes place for 40 % on line A. 60 % on line which varies over time
- Produced products are immediately shipped to two warehouses, respecting the required
minimum
- One warehouse is temporarily closed sometime during the next three months.
a) U-rule
b) T-rule, time-independent
c) P-rule
d) T-rule, time-dependent
Answer: A D
Question #:4 Which objects can you query on in the Advanced Analytics application?
a) On all versions
b) On simulations
c) On scenarios
d) Only on the base version
Answer: A D
Question #:5 Which of the following fields can be overwritten in the New Planning view by
fixed default value settings?
a) Planning Unit
b) Unit of Measure to ID
c) Language
d) Currency to ID
Answer: A B D
Question #:6 You created a time profile and want to use time levels. In which of the following
cases is it mandatory to set the time level?
Answer: B D
Question #:7 What can you use the Disaggregation (DISAGG) operator for in planning areas?
a) Copy master data and key figures from one planning area version to another.
b) Copy key figure values between the same versions of different planning areas.
c) Create missing planning objects
d) Check master data and key figures to reveal inconsistencies.
Answer: B C
Question #:8 You create an S&OP operator for heuristics on an SAP IBP project. What must you
enable for the S&OP operator which is specifically relevant for subnetworks?
Answer: C
Question #:9 You run a what-if analysis and use the Scenario planning function. Which actions
can you perform?
Answer: B C E
Question #:10 Which of the following are functions of SAP IBP for Demand?
a) Demand Sensing of demand data using the supply chain algorithm library
b) Embedded, on the fly, demand analytics
c) Demand Sensing of demand data using predictive analytics tools
d) Detailed statistical analysis of demand data using the supply chain algorithm library
e) Detailed statistical analysis of demand data using predictive analytics tools
Answer: B C E
Question #:11 You want to display and edit data in different units of measure (UOM). Which of
the following must you consider before you use UOM?
Answer: B C E
Question #:12 Why would you run the Purge Non-Conforming Planning Area Data application
job?
Answer: D
Question #:13 A time profile is defined with the levels week, month, quarter, and year. Which
PERIODID will be assigned to the quarter?
a) PERIODID1
b) PERIODID2
c) PERIODIDO
d) PERIODID3
Answer: B
Question #:14 Which of the following stages can be modeled using scenarios from the S&OP
planning cycle?
Answer: B C
Question #:15 Which of the following conditions are relevant for subtotals in planning view?
a) The values of the attribute-based total at the highest attribute level in the planning level
can be changed.
b) Only attribute-based totals can be added.
c) Total number of attributes that can use subtotals in the planning view can be restricted.
d) Total value can be added before or after the selected attribute.
Answer: C D
Question #:16 Which of the following functional areas are included in the out-of-the-box
Integrated Business Planning Sales and Operations model provided by SAP?
Answer: A B C
Question #:17 What are the main benefits of using SAP IBP Control Tower?
Answer: C D E
Question #:18 Which of the following are the key features of SAPIBP Control tower?
Answer: A D E
Question #:19 Analytics charts are created by the user in the advanced analytics application.
What actions are possible in the Advanced Analytics app?
Answer: C D
Question #:20 Which type of object do you use to create an offset for Period ID?
Answer: A
Question #:21 You need to define a new logic for a key figure to split values from the PERPRODC
USTREGION level to the PERPRODCUST level.
Which of the following configuration options are possible for this process?
a) Splitting the values from aggregated to detailed level using multiplication by the
proportions
b) Splitting the values from aggregated to detailed level based on stored split factor key
figure
c) Spitting the values from detailed to aggregated level by using copy operator
d) Spitting the values from aggregated to detailed level based on time profile attribute
Answer: A B
Question #:22 Which of the following checks for master data and key figures does the Check
Mode algorithm trigger?
a) Checks whether the location products specified in the master data are connected by
customer sourcing rules within the supply chain network.
b) Checks whether the required planning-level master data exists for a subset of input key
figures.
c) Checks whether the location resource specified in the master data forms a cycle in the
supply chain network.
d) Checks whether the heuristic detects cycles formed by nodes (such as location products)
in the supply chain network.
e) Checks whether the sourcing in the Production Source Item Master Data type exists.
Answer: A B D
Question #:23 Why do you run a consistency check for a key figure?
a) To verify that SUM() calculation is used for a key figure only if the Aggregation Mode of
the key figure is set to Sum or Custom
b) To verify that all key figures have a calculation defined at REQUEST level.
c) To verify that you used at most two input planning levels.
d) To verify that all key figures are marked as stored input in a key figure calculation.
Answer: B D
Question #:24 Which library is used by the forecasting engine for the Demand Sensing
algorithm?
a) Demand library
b) Predictive Analytics library
c) Supply Chain Algorithm library
d) Heuristics library
Answer: B
Question #:25 Which of the following segmentation options can you use when you configure
the segmentation profile?
a) Use ABC classification and XYZ segmentation with three segments each resulting in six
segments.
b) Use XYZ segmentation only to provide classification based on relative importance.
c) Use ABC classification only to provide classification based on two available segmentation
strategies.
d) Use time-independent key figures as segmentation measures for both ABC classification
and XYZ segmentation.
Answer: A
Question #:26 You set up periodic activities to support S&OP and want to use a job chain to
sequence these multiple steps. What must you do to use a job chain to sequence these multiple
steps?
a) Set up the job chain with five steps or less in the application job template.
b) Select the recurrence pattern in the Application Job Template app.
c) Schedule the job chain for recurring execution in the application job tile.
d) Ensure that the job chain can continue after the most error-prone step fails.
Answer: A B
Question #:27 You need to limit the value in projected periods of coverage to 999. What must
you do with the S&OP operator profile's configuration?
Answer: B
Question #:28 Which configuration elements can be used to add meaning to the planning
activities?
a) Reason codes
b) Microsoft Excel notes in Planning
c) Business Meaning Key figure Definition
d) Planning View notes
Answer: A D
Question #:29 Which one of the following values can you use in disaggregation expressions?
Answer: A
Question #:30 Which of the following settings are relevant for planning notes?
d) Planning notes created on a higher level are disaggregated to the base planning level of
the key figure
Answer: A D
Question #:31 Which of the following is one of the functions of Multi-Echelon inventory
optimization?
a) Ability to maintain high external service levels with high internal service levels
b) Ability to optimize delivery costs between different locations
c) Ability to optimize lead times between different locations
d) Ability to maintain high external service levels with low internal service levels
Answer: B
Question #:32 What do you have to do to connect to the SAP IBP database with SAP IBP Add-In
for Microsoft Excel?
Answer: B C
Question #:33 Which of the following chart types can be used to represent distribution in the
Advanced Analytics application?
a) Scatter
b) Heat map
c) Dual Y-Axis Line
d) Dual Stacked Column
Answer: A D
Question #:34 Which of the following are functions that represent milestone steps of the S&OP
process templates?
a) New instances of templates allow for re-use of the same processes again
b) Each step depicted in tl1e template can have tasks associated with it
c) All process templates are assigned to dashboards
d) Number of steps in a process template is the same for all implementations
Answer: A B
Question #:35 Which of the following planning entities must you set up when you configure a
planning area?
a) Time Profile
b) Attribute
c) Planning View Template
d) Planning Operator
Answer: A B
Answer: B D
Question #:37 You have set up infinite S&OP Heuristics for unconstrained planning. What must
you do to model inputs as constraints?
Answer: B D
Question #:38 You are adding a value-based filter to a planning view. Which of the following
conditions apply?
a) The alerts dashboard is not available if a value-based filter is set for the open planning
view
b) Can only apply one value-based filter per planning view.
c) You can add or delete planning objects to the planning view after these filters are
applied
d) These filters can be used together with attribute totals in the same planning view
e) These filters are always applied based on the values stored in the database
Answer: A B E
Question #:39 You need to monitor the capacity of your Distribution Center goods receipt
employees. Every goods receipt takes two working days of a warehouse employee.
a) Maintain a handling resource with available capacity on the DC and maintain the
number of days on the location product attributes.
b) Maintain a storage resource on the DC and maintain the number of days on the location
product attribute.
c) Maintain a warehouse resource on the DC and maintain the number of days on the
location product
d) Maintain a regular production resource and change the description in goods receipt
employee capacity. Maintain the number of days on the location product attribute.
Answer: D
Question #:40 What action can be performed in the Advanced Dashboards application?
Answer: A B D
Question #:41 What must you use to integrate order data into SAP IBP?
a) Microsoft Excel UI
b) Web UI data Load
c) Smart Data Integration
d) Cloud Platform Integration for Data Service
Answer: C
Question #:42 Which of the following key functions are supported by IBP for Sales & Operations
planning?
Answer: A C
Question #:43 Which supply chain challenge is addressed by SAP IBP Demand?
Answer: C
Question #:44 The tiles displayed on the Launchpad homepage are arranged into groups. What
applications can you include when you create a new group or add tiles to preexisting groups?
Answer: A
Question #:45 How many different time levels can be selected within one planning view?
Answer: D
Question #:46 Which of the following are the functions of Local Member key figures?
a) Inserted in the front-end by the add-in and calculated using an Excel formula
b) Inserted in the back-end by the Web UI and calculated using a key figure calculation
c) Refreshing of a planning view deletes Local Members key figures
d) Local member can be added as a row or column in planning view
Answer: A D
Question #:47 Co-production allows you to model co-products. The output of a production
process is several different products, which are produced concurrently.
Answer: A
Question #:48 Which of the following data can be tracked using change history enabled key
figure?
a) Modified date
b) Attributes
c) Key figure type
d) Reason code
e) Scenario ID
Answer: A B D
Question #:49 You are setting up a drill-down chart in the Advanced Analytics application to
allow the planner to drill down in a predefined sequence for consensus demand.
Answer: C
Question #:50 Why would you use a reference master data type?
Answer: A
Question #:51 You want to grant only display rights to a specific user in the Microsoft Excel UI.
How do you do this?
Answer: D
Question #:52 Which algorithm type can you use to plan the supply?
Answer: A
Question #:53 Which of the following global parameters can be used to initialize the value of
the forecast input key figure to a small value when historical data is missing for some periods?
Answer: D
Question #:54 Which of the following combination of nodes can be connected using the C-rule
and T-rule sourcing rules?
Answer: A
Question #:55 You want to enable versions for your planning area. Which activities must you
perform?
Answer: A B
Question #:56 Which of the following can be used as an input for inventory level optimization?
a) Reorder point
b) Lot sizes
c) Lead time variance
d) Target inventory level
Answer: B C
Question #:57 Which forecasting algorithms leverage the SAP HANA Predictive Analysis Library?
a) Accuracy Measurements
b) Best Model Selection
c) Time-Series
d) Pre-Processing
e) Demand Sensing
Answer: B D E
Question #:58 What differentiates the Create New (Simple copy) and the Create New with
Dependencies (Advanced copy) functions of a planning area?
a) The planning view favorites are only copied when you use the advanced copy.
b) A copy of the time profile is only created when you use the Create New with
Dependencies (Advanced copy) function.
c) Associated attributes are only shared between the original and the new planning area
when you use the Create New (Simple copy) function.
d) Master data is only shared between the original and the new planning area when you
use the Create New (Simple copy) function.
Answer: B C
Question #:59 Which of the following SAP Integrated Business Planning modules supports
Operational Supply Planning?
Answer: C
Question #:60 You are using Resource Location master data type. How do you specify Capacity
Supply as time-dependent?
Answer: B
Question #:61 You are working with Inventory Optimization Process and you want to use a
What If analysis. What parameters are assessed by this analysis?
a) Capacity consumption
b) Service levels
c) Changed variability
d) Number of planning combinations
Answer: B C
Question #:62 What are the main features of alert key figures?
a) Data for these key figures can be loaded into the system
b) They can be set to both calculated and stored
c) They check the conditions of other key figures
d) They can be defined as a key figure in the same way as the unit price
Answer: C
Question #:63 By default, all charts and dashboards are pubic. What should be done to make
charts and dashboards private?
a) Enable the relevant settings in the Advanced Analytics and Advanced Dashboards
application
b) Enable the relevant settings in the Global Configuration parameters
c) Set restrictions for charts in the Permission filter application.
d) Choose only relevant key figures and filters in Analytics Advanced application
Answer: B
Question #:64 Which of the following are functions of the Snapshot Key Figures feature?
Answer: B D E
Question #:65 Which conditions are prerequisites for key figure disaggregation?
a) The key figure is calculated and editable in the current and future.
Answer: D
Question #:66 Model Configuration allows the attributes of a master data type to be assigned
as key figures. Which features are relevant for this type of object?
a) This object contains user-defined criteria that monitor the execution of business plans
b) This object provides a single value for a unique planning combination
c) This type of key figure is not usually stored and it cannot be set to be editable
d) This object is not exposed to the user in planning views or modeling
Answer: B D
Question #:67 You have set up a planning area and data is available. You adjust the necessary
time profile settings and run the consistency check.
Which settings can you change and still run a successful consistency check?
Answer: C
Question #:68 You are configuring a complex calculation using helper key figures. What must
you take into account while completing this task?
a) You need to apply a helper key figure if you have more than two inputs at different
planning levels in one calculation.
b) You can expose the helper key figure to the user in planning views.
c) You can use the helper key figure at different planning levels.
d) You must check if the helper key figures have a base planning level.
Answer: A C
Question #:69 Which of the following configuration rules can be applied to the copy operator?
Answer: B D
Question #:70 You are reviewing the master data types for supply planning. Which master data
types are compound master data types?
a) SOURCE LOCATION
b) SOURCE PRODUCTION
c) SOURCE CUSTOMER
d) LOCATIONFR
Answer: A C
Question #:71 You define a fixing for key figure, which of the following functions are available
for this key figure?
Answer: A B C
Question #:72 You are creating a Handling resource. What Resource Type do you need to
specify?
a) 0
b) 1
c) 4
d) 2
Answer: D
Question #:73 Your project requires end-to-end visibility and basic supply and demand
planning. Which one of the following IBP Solution components do you recommend?
Answer: A
Question #:74 You create a Planning filter in the WebUI app. Which of the following objects can
it be applied to?
Answer: B D
Question #:75 Process chevrons can be added to existing dashboards in the Advanced
Dashboards application. What do the S&OP Process chevrons represent?
Answer: B
Question #:76 You want to set up Demand Sensing to analyze demand changes in execution or
close to execution windows. Which of the following conditions must you consider during the
setup?
a) The result generates sensed demand data at the monthly time granularity for the time
horizon defined in the forecast model
b) Set up the forecast model to be executed at product-location level
c) At setup test the system to run the Demand Sensing (full) algorithm weekly and the
Demand Sensing (update) on a daily basis.
d) It is mandatory to load historical lag-based snapshot data
Answer: C D
Question #:77 What must you do to enable change recording for a key figure?
Answer: A D
Question #:78 Which of the following checks for master data and key figures does the Check
Mode algorithm trigger?
a) Checks whether the required planning-level master data exists for a subset of input key
figures.
b) Checks whether the location products specified in the master data are connected by
customer sourcing rules within the supply chain network.
c) Checks whether the sourcing in the Production Source Item Master Data type exists.
d) Checks whether the heuristic detects cycles formed by nodes (such as location products)
in the supply chain network.
e) Checks whether the location resource specified in the master data forms a cycle in the
supply chain network.
Answer: A B D
Question #:79 Which conditions are prerequisites for key figure disaggregation?
a) The key figure is calculated and editable in the current and future.
b) The calculated key figure is available and aggregation mode is selected.
c) The key figure is set to Not Editable.
d) The key figure is stored and editable in the current and future.
Answer: D
Question #:80 Which of the following can be used as an input for inventory level optimization?
a) Reorder point
b) Lot sizes
c) Lead time variance
Answer: B C
Question #:81 Which of the following are functions of SAP IBP for Demand?
a) Detailed statistical analysis of demand data using the supply chain algorithm library
b) Detailed statistical analysis of demand data using predictive analytics tools
c) Demand Sensing of demand data using predictive analytics tools
d) Demand Sensing of demand data using the supply chain algorithm library
e) Embedded, on the fly, demand analytics
Answer: B C E
Question #:82 You are configuring a complex calculation using helper key figures. What must
you take into account while completing this task?
a) You can expose the helper key figure to the user in planning views.
b) You need to apply a helper key figure if you have more than two inputs at different
planning levels in one calculation.
c) You must check if the helper key figures have a base planning level.
d) You can use the helper key figure at different planning levels.
Answer: B D
Question #:83 Which of the following conditions are relevant for subtotals in the planning
view?
a) Total number of attributes that can use subtotals in the planning view can be restricted.
b) The values of the attribute-based total at the highest attribute level in the planning level
can be changed.
c) Total value can be added before or after the selected attribute.
d) Only attribute-based totals can be added.
Answer: A C
Question #:84 You are reviewing the master data types for supply planning. Which master data
types are compound master data types?
a) LOCATIONFR
b) SOURCE PRODUCTION
c) SOURCECUSTOMER
d) SOURCE LOCATION
Answer: C D
Question #:85 What must you use to integrate order data into SAP IBP?
Answer: D
Question #:86 The tiles displayed on the Launchpad homepage are arranged into groups. What
applications can you include when you create a new group or add tiles to preexisting groups?
Answer: C
Question #:87 Which of the following stages can be modeled using scenarios from the S&OP
planning cycle?
Answer: B D
Question #:88 How many different time levels can be selected within one planning view?
Answer: C
Question #:89 A time profile is defined with the levels week, month, quarter, and year. Which
PERIODID will be assigned to the quarter?
a) PERIODID3
b) PERIODID2
c) PERIODIDO
d) PERIODID1
Answer: B
Question #:90 You run a what-if analysis and use the Scenario planning function. Which actions
can you perform?
Answer: B D E
Question #:91 You need to limit the value in projected periods of coverage to 999. What must
you do with the S&OP operator profile's configuration?
Answer: B
Question #:92 You create a Planning filter in the WebUI app. Which of the following objects can
it be applied to?
Answer: A B
Question #:93 You are setting up a drill-down chart in the Advanced Analytics application to
allow the planner to drill down in a predefined sequence for consensus demand.
Answer: D
Question #:94 You would like to persistently enhance the layout, for example by underlining a
key figure, of your planning view template. What can you use to do this?
Answer: C
Question #:95 Which of these conditions must be met to create a Local Member key figure?
Answer: C
Question #:96 Why would you use a reference master data type?
Answer: B
Question #:97 Which action that can be performed with an existing configuration object will
result in the creation of a D record in the database?
Answer: A
Question #:98 What function would you use to configure year to date calculation?
Answer: A
Question #:99 Which supply chain challenge is addressed by SAP IBP Demand?
Answer: A
Question #:100 Process chevrons can be added to existing dashboards in the Advanced
Dashboards application. What do the S&OP Process chevrons represent?
Answer: B
Question #:101 You create an S&OP operator for heuristics on an SAP IBP project. What must
you enable for the S&OP operator which is specifically relevant for sub networks?
Answer: C
Question #:102 Which of the following is one of the functions of Multi-Echelon inventory
optimization?
d) Ability to maintain high external service levels with high internal service levels
Answer: A
Question #:103 A planning area can include one or more planning levels. What are the functions
of a planning level?
Answer: A C
Question #:104 Why would you set up a cascading filter in the planning view?
Answer: A B
Question #:105 What can you use the Disaggregation (DISAGG) operator for in planning areas?
a) Copy master data and key figures from one planning area version to another.
b) Check master data and key figures to reveal inconsistencies.
c) Create missing planning objects
d) Copy key figure values between the same versions of different planning areas.
Answer: C D
Question #:106 You want to grant only display rights to a specific user in the Microsoft Excel UI.
How do you do this?
Answer: A
Question #:107 You are adding a value-based filter to a planning view. Which of the following
conditions apply?
a) These filters can be used together with attribute totals in the same planning view
b) B. Can only apply one value-based filter per planning view.
c) C. These filters are always applied based on the values stored in the database
d) D. You can add or delete planning objects to planning view after these filters are applied
e) E. The alerts dashboard is not available if a value-based filter is set for the open planning
view
Answer: B C E
Question #:108 You are designing the planning area granularity. How do you construct the
granularity of the data which is saved?
a) Assign a time profile and a storage profile in the planning area header configuration and
for any additional planning level
b) Assign, besides the base planning level, a separate time profile for every additional
planning level in the planning area
c) Assign a time profile and define the smallest granularity for every additional planning
level
d) Define a base planning level and assign a storage profile with the required granularity
Answer: C
Question #:109 You need to define a new logic for key figure to split values from the PERPRODC
USTREGION level to the PERPRODCUST level.
Which of the following configuration options are possible for this process?
a) Spitting the values from detailed to aggregated level by using copy operator
b) Splitting the values from aggregated to detailed level using multiplication by the
proportions
c) Splitting the values from aggregated to detailed level based on stored split factor key
figure
d) Spitting the values from aggregated to detailed level based on time profile attribute
Answer: B C
Question #:110 What are the main features of alert key figures?
a) Data for these key figures can be loaded into the system
b) They can be defined as a key figure in the same way as the unit price
c) They check the conditions of other key figures
d) They can be set to both calculated and stored
Answer: C
Question #:111 You have set up a planning area and data is available. You adjust the necessary
time profile settings and run the consistency check.
Which settings can you change and still run a successful consistency check?
Answer: C D
Question #:112 What action can be performed in the Advanced Dashboards application?
Answer: A C D
Question #:113 Co-production allows you to model co-products. The output of a production
process is several different products, which are produced concurrently.
a) Consumption of components
b) Production Lot Size
c) Capacity Consumption
d) Output Product Coefficient
Answer: D
Question #:114 What must you do to enable change recording for a key figure?
Answer: A B
Question #:115 Which one of the following values can you use in disaggregation expressions?
Answer: B
Question #:116 What do you have to do to connect to the SAP IBP database with SAP IBP Add-In
for Microsoft Excel?
Answer: B C
Question #:117 When you promote calculated and approved inventory parameters from IBP for
Inventory what other IBP modules can be receiving them?
a) Supply Planning
b) Demand Sensing
c) S&OP
d) DDMRP
Answer: A C
Question #:118 Which input parameters can you use to limit the scope of your supply planning
run?
a) Product locations
b) Time periods
c) Subnetwork
d) Permission filter
e) Versions
Answer: B C E
Question #:119 You created a key figure and want to add calculations. Which of the following
rules do you consider?
a) All key figure calculations have calculation inputs, which can be marked as stored or
non-stored.
b) Aggregation calculations using SUM or MAX functions must be based on a higher
aggregation level.
c) Key figures can be calculated across different planning levels.
d) The calculation chain for a key figure must always result in a calculated key figure.
Answer: A C
Question #:120 You are creating a planning view in the SAP IBP for Microsoft Excel add-in.
Which settings can you maintain as default values?
a) Permission filter
b) Language
c) Default Planning Area
d) Default Display Time (Zone)
Answer: B C
Question #:121 You need to create various planning operators. Which operators must you assign
to your planning area to view them in Microsoft Excel?
a) Copy Operator
b) Disaggregation Operator
c) Statistical Forecasting
d) Check Mode Operator
Answer: B C
Question #:122 What are some of the prerequisites for configuring a planning area that results
in a successful consistency check?
a) Configure at least one calculated key figure for the planning area.
b) Configure at most two input key figures on the same planning level in a key figure
calculation.
c) Specify a planning horizon in the planning area for each level of the assigned time
profile.
d) Assignment of a compound master data type necessitates the assignment of its
component master data types too.
Answer: C D
Question #:123 What differentiates the Create New (Simple copy) and the Create New with
Dependencies (Advanced copy) functions of a planning area?
a) Associated attributes are only shared between the original and the new planning area
when you use the Create New (Simple copy) function.
b) The planning view favorites are only copied when you use the advanced copy.
c) Master data is only shared between the original and the new planning area when you
use the Create New (Simple copy) function.
d) A copy of the time profile is only created when you use the Create New with
Dependencies (Advanced copy) function.
Answer: A D
Question #:124 You need to create various planning operators. Which operators must you assign
to your planning area to view them in Microsoft Excel?
a) Disaggregation Operator
b) Copy Operator
c) Check Mode Operator
d) Statistical Forecasting
Answer: A D
Question #:125 Which of the following configuration options are part of the New Key Figure
creation process?
Answer: A B D
Question #:126 What is a possible technique used by forecast models in IBP S&OP Module?
a) Statistical Algorithms
b) Security Assertion Markup Language (SAML)
c) Mixed Integer Linear Programming (MILP)
d) Predictive Analytics
Answer: A
Question #:127 Which of the following configuration options are part of the New Key Figure
creation process?
Answer: A B D