Professional Documents
Culture Documents
Pilot Operated Pressure Regulator 6" 25P: Typical Applications
Pilot Operated Pressure Regulator 6" 25P: Typical Applications
Regulators
Pilot Operated
Operated
6" 25P
Pilot
Temperature ˚C
at connections
tur
sa A1
ANSI 250
am
Ste
200 93
ANSI 125
100 38
15 1
50 100 150 200 250 300
(7) (14) (20)
Pressure psig (barg) C
The product should not be used in shaded area.
Cast Steel
600 315
500 260
450 E
Temperature ˚C
400 204
ANSI 300
e
urv
nc 149
Temperature ˚F
300 ra tio
satu
m
Stea
200 93 D
ANSI 150
100 38
15 1
0 50 100 150 200 250 300 350
(7) (14) (20)
Pressure psig (barg)
The product should not be used in shaded area. B
Note: Maximum temperature for Stainless Steel tubing is 600˚F
Dimensions (nominal) in inches and millimeters
Downstream Pressure Ranges ANSI 125/150 ANSI 250/300
For the following downstream pressures, Cv Values Size A1 A1 B C D E Weight
three color-coded pilot valve springs are
available: Size 6" 6" "S" 6" 18.1 18.9 19.75 14.9 17.1 32.1 595 lb
Yellow: 3 to 30 psi Cv value 280 156 460 481 502 380 435 815 270 kg
Blue: 20 to 100 psi
Red: 80 to 250 psi
Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only.
In the interests of development and improvement of the product, we reserve the right to change the specification. TI-3-016-US 7.18
378
Pilot Operated Pressure Regulator
Regulators
Regulators
6" 25P
Pilot Operated
Operated
43 3
Pressure
Pressure
44 2
Pilot
48 10
45 1
46
48 8
54
50
47
49
51 4
60 5
15
11
16
13
14
17
12
15
Construction Materials
No. Part Material No. Part Material
1 Valve Body Cast Iron ASTM A 126 CL B 47 Lower Diaphragm Case Cast Iron ASTM A 126 CL B
Cast Steel ASTM A 216 WC B Cast Steel ASTM A 216 WC B
2 Cover Cast Iron ASTM A 126 CL B 48 Spring Plate Steel ASTM A569
Cast Steel ASTM A 216 WC B 49 Diaphragm Stainless Steel ASTM A240
3 Cover Bolts Steel AISI 1038 50 Diaphragm Plate Brass ASTM B36
4 Main Valve Head Stainless Steel ASTM A 743 CA 40 51 Head & Seat Assembly Stainless Steel AISI 440
5 Main Valve Seat Stainless Steel ASTM A 743 CA 40 Stainless Steel AISI 440F
7 Valve Return Spring Stainless Steel AISI 302 54 Diaphragm Case Screws Steel 5/16" - 18 x 1" ASTM A449
8 Valve Stem Stainless Steel AISI 304 60 Pilot Gasket Graphite
10 Cover Gasket Graphite BS 2815 A
11 Stem Bushing Brass ASTM B16 Installation
12 Lower Diaphragm Case Cast Iron ASTM A 126 CL B The regulator should be installed in a horizontal line with suitable
Cast Steel ASTM A 216 WC B bypass and isolating valves. A steam trap should be installed upstream
to prevent condensate from reaching the regulator. The trap and
© Spirax Sarco, Inc. 2018