Professional Documents
Culture Documents
SECTION/Description Pages
Ergonomic Grips 34
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 1
JOYSTICKS - page 2
JOYSTICKS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 3
FTC - / 0 - -
Joystick Family & Type Main body configuration Y-Y axis control configuration Type of grip Pot. Connector Type
FTC Mini/Fingertip control lever L1S Single axis, uni-directional A Only potentiometer IP Paddle Type 0 None ( only pin, solder type )
1KOhm
L2S Single axis, bi-directional KC Cylindric Type 1 4 poles electronic board on pot.
C Pot & Bi-Direct. Switches AMP MODU I connector
25%-75% Signal
(AMP p/n 280610/1)
KC1 Cylindric Type Mating connector kit included
D Only potentiometer with "dead man"
option
5KOhm
and bi-directional switches
5%-95% Signal
F Pot & Bi-Direct. Switches AMP MODU I connector
(AMP p/n 280612/1)
JOYSTICKS - page 4
Mating connector kit included
FTC Proportional Control Lever - Ordering Information
G Only potentiometer
10KOhm
I Pot & Bi-Direct. Switches
0%-40% Signal
L Only potentiometer
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
N Pot & Bi-Direct. Switches
5KOhm
0%-100% Signal
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
X Pot & Bi-Direct. & Center Switches
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
JLP
JLP - L2S / 0 - IP -
JOYSTICKS
Joystick Family & Type Main body configuration Y-Y axis control configuration Type of grip Output Connector
JLP Mini Fingertip L2S Single axis, bi-directional IP Paddle Type D 7 pins Dubox Male Connector
control lever Q Pot & Bi-Direct.Switches Mod.76382.407
( Q & R version )
5KOhm
10-90% Signal
E 4 pins Amp J. Male Connector
Mod.929505-1
R Pot & Bi-Direct.Switches ( V version only )
4KOhm
0-100% Signal
Dubox Mating Connector
JOYSTICKS - page 5
C Pot & Bi-Direct.Switches
2KOhm
Proportional Control Lever - Ordering Information
25-75% Signal
V Twin Channel
Channel
Twin Potentiometric
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
PRS - L2S - 0 - L
PRS / FPR
Joystick Family & Type Main body configuration Y-Y axis control configuration Type of Grip on Top
PRS Mini Proportional L2S Single axis, bi-directional P Pot & Bi-Directional Switches L Rubber Protection and
Rocker Switch 5 Kohm 12%-88% Signal Mini- Paddle
Joystick Family & Type Main body configuration Number of Channels Power Supply Range
FPR Mini Hall Effect Proportional L2S Single axis, bi-directional SN Single channel 0 5 VDC +/-5%
JOYSTICKS - page 6
Roller Switch
FPR-PWM - L2S - CH -
Fingertip Proportional Switches - Ordering Information
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Joystick Family & Type Main body configuration Number of Channels Power Supply Range
FPR Mini Hall Effect Proportional L2S Single axis, bi-directional SN Single channel H 8-32 VDC of power supply
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
Roller Switch with PWM Driver for dual coil prop.
valve
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
JOYSTICKS
Mechanical Specifications
. Lever deflection angle: 50° +/- 1°
. Electrical angle: 50° +/- 1°
. Operating temperature range: -25°C / + 80°C
. Protection class: IP 65 (above panel)
. Life: 3 million cycles
Electrical Specifications
3-pins rotary potentiometer
. Electrical power rating: 0.25 W @ 25°C
. Ohmic resistance: / A=50% of Vin 1 kOhm +/- 20%
/ D=90% of Vin 5 kOhm +/-20% * Shown with paddle type grip. Small cylindrical grip
. Max. operating input voltage (Vin): 48 V or +/-24V KC type also available, with optional dead man push button
. Min. load impedance on pin 2 (Signal) 50 kOhm
. Max. operating current on pin 2 1 mA
. Output voltage See GRAPH 1 Panel Cut-Out
. Linearity (resistive track) 2% or better
. Connection type: 0 = solder type (no connector)
1= AMP Modu I/ 4 poles connector
(mating connector kit included)
Electrical Connections
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 7
JOYSTICKS
Mechanical Specifications
. Lever deflection angle: +/- 25° +/- 1°
. Electrical angle: +/- 25° +/- 1°
. Operating temperature range: -25°C / + 80°C
. Protection class: IP 65 (above panel)
. Life: 3 million cycles
Electrical Specifications
3-pins rotary potentiometer
. Electrical power rating: 0.25 W @ 25°C
. Ohmic resistance: / A=50% of Vin 1 kOhm +/- 20%
/ D=90% of Vin 5 kOhm +/-20%
. Max. operating input voltage (Vin): 48 V or +/-24V
. Min. load impedance on pin 2 (Signal) 50 kOhm
. Max. operating current on pin 2 1 mA * Shown with paddle type grip. Small cylindrical grip
. Output voltage See graph KC type also available, with optional dead man push button
. Linearity (resistive track) 2% or better
. Connection type: 0 = solder type (no connector) Panel Cut-Out
1= AMP Modu I/ 4 poles connector
(mating connector kit included)
Electrical Connections
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 8
JOYSTICKS
Mechanical Specifications
. Lever deflection angle: +/- 25° +/- 1°
. Electrical angle: +/- 25° +/- 1°
. Operating temperature range: -25°C / + 80°C
. Protection class: IP 65 (above panel)
. Life: 3 million cycles
Electrical Specifications
3-pins rotary potentiometer
. Electrical power rating: 0.25 W @ 25°C
. Ohmic resistance: / G=40% of Vin 1 kOhm +/- 20%
/ L=100% of Vin 5 kOhm +/-20%
. Max. operating input voltage (Vin): 48 V or +/-24V
. Min. load impedance on pin 2 (Signal) 50 kOhm
. Max. operating current on pin 2 1 mA
. Output voltage: See graph * Shown with paddle type grip. Small cylindrical grip
. Linearity (resistive track): 2% or better KC type also available, with optional dead man push button
. Connection type: 0 = solder type (no connector)
1= AMP Modu I/ 4 poles connector
(mating connector kit included) Panel Cut-Out
Center / Bi-Directional Switches (electromechanical type)
. Contacts: Silver Plated (solder type)
. Max. operating input voltage: 48 V or +/-24V
. Max. operating current: 1.5 A/inductive
. Neutral position switch threashold angle: +4°
. Protection class: IP55 (IP67 available on request)
Electrical Connections
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 9
JOYSTICKS
Mechanical Specifications
Electrical Specifications
Potentiometer
. Electrical power rating: 0.25 W @ 25°C
. Ohmic resistance: / C=50% of Vin 2 kOhm +/- 20%
/ Q=90% of Vin 5 kOhm +/- 20%
/ R=100% of Vin 4 kOhm +/-20% Panel Cut-Out
. Max. operating input voltage (Vin): 48 V or +/-24V
. Min. load impedance on pin 5 (Signal) 50 kOhm
. Max. operating current on pin 5 1 mA
. Output voltage See graph 2 off 4,5 mm ID
. Linearity (resistive track) 2% or better 4 off 3,5 mm ID (Alternative)
Directional Switches
. Typical track resistance: 150 Ohm
Output Signal Control Characteristic
. Max. operating input voltage 48 V or +/-24V
. Min. load impedance on pins 2&3 : 50 kOhm
. Max. operating current on pins 2&3 1 mA
. Directional switches threashold angle: +/- 4° 3-pins configuration
. Connector type : wiring
Reference codes
Output signal S=80% Vin S=100% Vin S=50% Vin
3-4 pins Potentiometer Q R C
& Bi-Dir. Switches
Electrical Connections
4-pins configuratio
Connector type: wiring
7 pin DUBOX
(Mod. 76382.407)
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 10
JOYSTICKS
Mechanical Specifications
Electrical Specifications
Potentiometer
. Electrical power rating: 0.25 W @ 25°C
. Total resistance between pin 1 and 3: 2 kOhm +/- 20%
. Nominal voltage supply (Vin): 10 V
. Tolerance between Track 1 and 2 : 50 kOhm
. Load resistance : 100 kOhm - nominal
50 kOhm - minimum
. Output voltage : See graph
. Linearity (resistive track) 2% or better Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 11
JOYSTICKS
Features
. Mini Proportional Roller Switch with optimum ergonomic design for panel-mounting
. High performance Hall Effect Sensor Circuitry
. Twin Channel configuration for redundancy
Mechanical Specifications
Electrical Specifications
Electrical Connections
FPR - L2S - SNCH (Single chan.) FPR - L2S - TWCH (Twin chan.)
Yellow: + 5Vdc Yellow: + 5Vdc
Orange: (-) Ground Orange: (-) Ground
Red: Output 1 (S1) Red: Output 1 (S1)
Brown: not used Brown: Output 1 (S2)
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 12
JOYSTICKS
Features
. Mini Proportional Roller Switch with optimum ergonomic design for panel-mounting
. High performance Hall Effect Sensor Circuitry
. PWM electronic driver integrated into the roller for remote control of a dual-coil
proportional solenoid valve
Mechanical Specifications
Electrical Specifications
Electrical Connections
Red: +Battery
Black: -Battery (GND)
Blue: PWM Valve A+
Brown: PWM Valve B+ The following values are factory set:
Gray: PWM A/B- (common) . Imin (minimum output current)
. Imax (maximum output current)
Overall Dimensions . Dither
Application example
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 13
JOYSTICKS
Features
Mechanical Specifications
Electrical Specifications
Electrical Connections
P & T version
3&4 pins configuration 4 pins configurati
wiring
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 14
JOYSTICKS - page 15
JOYSTICKS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 16
JMF
JMF - / - / -
JOYSTICKS
Joystick Family & Type Main body configuration YY / XX axes control config. Type of grip Grip Configurat. Pot.Connector Type
JMF Heavy Duty / Multi-Axis L1SF Single axis, uni-directional 0 No Pot & Switches on Y / X axis IL Cylindrical Refer to the Grip 0 Flying leads
Joystick Controller with Friction Lock Knob ordering information 15 cm length
for zz e kk axes
L2S Single axis, bi-directional 2 Only Bi-Dir. Switches on Y / X axis IC Cylindrical ( push-buttons &
1KOhm
L4C Dual axes, Cross Movement C Pot & Bi-Direct.Switches kit included
25%-75% Signal
MS Multi-Function
Ergonomic
L4D Dual axes, All Diagonals D Only potentiometer Symmetric
JOYSTICKS - page 17
3-pin rotary potentiometer
5KOhm
F Pot & Bi-Direct.Switches MG Multi-Function
5%-95% Signal
Ergonomic
Heavy Duty Multi-Axis Joystick - Ordering Information
Right Hand
G Only potentiometer
10KOhm
I Pot & Bi-Direct.Switches
0%-40% Signal
L Only potentiometer
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
5KOhm
N Pot & Bi-Direct.Switches
0%-100% Signal
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JHD
JHD - / - / -
Joystick Family & Type Main body configuration YY / XX axes control config. Type of grip Grip Configurat. Output Connector
JHD Heavy Duty / Multi-Axis L2S Single axis, bi-directional 0 No Pot & Switches on Y / X axis IL Cylindrical Refer to the Grip 3 Flying leads
Joystick Controller Knob ordering information 15 cm lenght
for zz e kk axes
L4C Dual axes, Cross Movement O Only potentiometer IC Cylindrical ( push-buttons &
5 Kohm 12%-88% Signal proportional controls 4 Circular type,9 poles,
on grips) Deutsch HD14-9-16P
L4D Dual axes, All Diagonals IE Multi-Function 15 cm cable lenght
S Only potentiometer Ergonomic
3,75 Kohm 0%-100% Signal
JOYSTICKS - page 18
MS Multi-Function
P Pot & Bi-Directional Switches Ergonomic
5 Kohm 12%-88% Signal Symmetric
Heavy Duty Multi-Axis Joystick - Ordering Information
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
JHM
JOYSTICKS
JHM - / - / -
Joystick Family & Type Main body configuration YY / XX axes control config. Type of grip Grip Configurat. Output Connector
JHM Heavy Duty L2S Single axis, bi-directional ANL Analog Signal 0,5>2,5>4,5 VDC IL Cylindrical Refer to the Grip 3 Flying leads
Multi-Axis Power Supply Range = 5VDC+/-5% Knob ordering information 15 cm lenght
Hall Effect Type for zz e kk axes
Joystick Controller L4C Dual axes, Cross Movement ( push-buttons &
ANH Analog Signal 0,5>2,5>4,5 VDC IC Cylindrical proportional controls
Power Supply Range = 8-32 VDC on grips) 4 Circular type, 9 poles,
L4D Dual axes, All Diagonals Deutsch HD14-9-16P,
IE Multi-Function 15cm cable length
AVS Center tap output signal with Ergonomic
digital directional signals
5 Male Connector, 4 poles,
MS Multi-Function Deutsch DT04 4P,
TCN 1 PWM ouput in combination Symmetric 15 cm cable length
with up to 4 on/off channels (for CANbus version only)
JOYSTICKS - page 19
MG Multi-Function
PWM Pulse With Modulation Current Output Ergonomic
Factory Preset or Set via PC Right Hand
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
The JMF potentiometeric joystick controller has been designed for use in Mobile Option L1S Single axis control / Uni-Directional
and Industrial Field application. The potentiometer in use, available Option L2S Single axis control / Bi-directional
with 3 or 4-pins configuration, grants precision and a long working life. Option L4C Cross axis control / Bi-directional
When coupled with an M range of ergonomic multi-function handles, up to 5 Option L4D Multi-axis control / Bi-directional
proportional axes and 9 on-off push buttons can be integrated in the same joystick. * friction lock option available for L1S and L2S
Power directional switches are available.
Mechanical Specifications
Reference codes
Output signal S=40% Vin S=100% Vin
4-pin Pot G L
4-pin Pot & Bi-Dir. Switches I N (Std)
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 20
JOYSTICKS
Electrical Specifications
NO NC C
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 21
JOYSTICKS
JMF base with IE type handle. JMF base with IE type handle.
Complete code : JMF-L4C/NN-IE A3P9 0000 Complete code : JMF-L4C/NN-IE A1P9 1PRS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 22
JOYSTICKS
JMF base with MS type handle. JMF base with MS type handle.
Complete code: JMF-L4C/NN-MS A6P9 R3P9 Complete code : JMF-L4C/NN-MS A2P9 2FPR R1P9
JMF base with MG type handle. JMF base with MG type handle.
Complete code : JMF-L4C/NN-MG A4P9 R1P9 Complete code : JMF-L4C/NN-MG A2P9 1FPR R1P9
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 23
JOYSTICKS
The JHD potentiometeric joystick controller has been designed for use in Mobile Option L1S Single axis control / Uni-Directional
and Industrial Field application. The potentiometer in use, available Option L2S Single axis control / Bi-directional
with 3 or 4-pins configuration, grants precision and a long working life. Option L4C Cross axis control / Bi-directional
When coupled with an M range of ergonomic multi-function handles, up to 5 Option L4D Multi-axis control / Bi-directional
proportional axes and 9 on-off push buttons can be integrated in the same joystick.
Low amperage directional switches are available.
Mechanical Specifications
*Shown with
MG grip
Potentiometer & Switches Options (Y-Y and X-X Axis)
Reference codes
Output signal S=75% Vin S=100% Vin
3-pin Pot O S
4-pin Pot & Bi-Dir. Switches P T
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 24
JOYSTICKS
Electrical Specifications
4-pins pot.
configuration
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 25
JOYSTICKS
JHD base with IE type handle. JHD base with IE type handle.
Complete code : JHD-L4C/TT-IE A3P9 0000 Complete code : JHD-L4C/TT-IE A1P9 1PRS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 26
JOYSTICKS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 27
JOYSTICKS
JHM Heavy Duty Multi-Axis Hall Effect Joystick (joystick base only)
The JHM joystick controller has been designed for use in Mobile and Industrial Option L2S Single axis control / Bi-directional
Field applications. The use of the Hall Effect sensor, which eliminates any Option L4C Cross axis control / Bi-directional
contact beetween moving electrical parts, improves overall resolution, Option L4D Multi-axis control / Bi-directional
precision and life. A complete line of built-in electronic drivers, generating
On-Off , proportional and CANbus control signals, guarantees the highest
controllability of any type of electro-hydraulic system.
When coupled with an ergonomic multi-function handle of the M range , up to 5
proportional axes and 9 on-off push buttons can be integrated in the same
joystick. As further option, the JHM is also available with a magnetic position
detent on the Y- or X-axis.
Mechanical Specifications
Electrical Specifications
* Shown with MS grip
. Sensor: Hall Effect contactless technology
. Supply voltage: ANL version = 5V +/-5%
other versions = 8 - 32V
. Current consumption @ rest: 25 mA (sensor only)
. Output Signal configuration: see next pages for all versions
. Electronic Seal : Potted Electronics
. Connector type: Deutsch HD14-9-16P
other type available on request
. Protections: overvoltage and reverse voltage
Panel Cut-Out
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 28
JOYSTICKS
JHM Heavy Duty Multi-Axis Hall Effect Joystick (joystick base only)
Application example
TCN version (1 PWM output in combination with up to 7 on/off outputs) (shown with MG grip)
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 29
JOYSTICKS
JHM Heavy Duty Multi-Axis Hall Effect Joystick (joystick base only)
Application example
PWM version ( 2 PWM channels ) (shown with MG grip)
MLT version (output adjustable signal for closed loop prop. actuators )
Application example
. Supply voltage: 8 - 32 Vdc (shown with MG grip)
. Current consumption @ rest: 250 mA
. Analog outputs: 4
. Output signal range: linear signal 0.9 - 4.1 V
2 - 6 V or ratiometric output
available on request
. Rated output current: 1 mA
. Power digital outputs : 4 (0.7 A)
. Digital inputs available 2
. Adjustments: via RS 232 serial line
With Canbus link, following signals can be managed on the multifunctional grip:
. 4 digital outputs 0.7A (LEDs, detent coils, buzzers, etc.)
. 6 analog voltage input 0-5 V (prop. rollers and mini-joysticks)
. 6 digital inputs (push buttons, toggles, etc.)
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 30
JOYSTICKS
JHM base with IE type handle. JMF base with IE type handle.
Complete code : JHM-L4D/ANH-IE A4P9 0000 Complete code : JHM-L4D/ANH-IE A1P9 1PRS
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 31
JOYSTICKS
JHM base with MS type handle. JHM base with MS type handle.
Complete code: JHM L4D/ANH-MS A6P9 R3P9 Complete code: JHM L4D/ANH-MS A2P9 2FPR R1P9
JHM base with MG type handle. JHM base with MG type handle.
Complete code: JHM L4D/ANH-MG A4P9 R1P9 Complete code: JHM L4D/ANH-MG A2P9 1FPR 0000
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 32
JOYSTICKS - page 33
JOYSTICKS
Ergonomic Grips
IC Type (cylindrical)
x Ordering Information page 35
x Technical Information page 38
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 34
IL /
JOYSTICKS
IC /
IE / /
JOYSTICKS - page 35
on grip on grip
IE Ergonomic 0 No Dead Man
A Right side Nbr.of PB Type of Push Button Nbr.of Control Type of Analog Control
Dead Man PB
Red Colour n = 0-3 00 No Push Button n = 0-1 000 No Control
B Left side P9 up to 3A inductive PRS Prop. Rocker Switch
Dead Man PB FPR Prop. Roller Switch
Red Colour
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
MS / / /
Type of Grip Dead Man PB On-Off Controls Analog Controls On-Off & Analog
on Front Plate on Front Plate Controls on Rear Edge
MS Multifunction 0 No Dead Man
ergonomic A Dead Man PB Nbr.of PB Type of Push Button Nbr.of Control Type of Analog Control Only On-Off Controls
symmetric
n=0-6 00 No Push Button n=0-2 000 No Control Nbr.of PB Type of Push Button
P9 up to 3A inductive FPR Prop. Roller Switch 0000 no PB P9 up to 3A inductive
R1P9 1PB
OPTION 1FPR - 1PWM R2P9 2PB
Prop.Roller and Built-in PWM R3P9 3PB
driver for a bi-directional dual
proportional coil On-Off & 1 Analog Control
JOYSTICKS - page 36
MS Ergonomic Symmetric Grip - Ordering Information
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
MG / / / R
JOYSTICKS
Type of Grip Dead Man PB On-Off Controls Analog Controls On-Off Controls
on Front Plate on grip on Rear Edge
MG Ergonomic 0 No Dead Man
Right Hand A Dead Man PB Nbr.of PB Type of Push Button Nbr.of Control Type of Analog Control Nbr.of PB Type of Push Button
OPTION 1FPR-1PWM
Prop.Roller and built-in PWM
driver for a bi-directional dual
proportional coil
MG Ergonomic Grip - Ordering Information
2FPR-2PWM
Prop.Roller and built-in PWM
driver for a bi-directional dual
JOYSTICKS - page 37
proportional coil
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
JOYSTICKS
IL - IC Grips
Electrical Specifications
Electrical Specifications
. Prewired exit cable: 250 mm
. Prewired exit cable: 250 mm . Insulating Cable Material: PVC
. Insulating Cable Material PVC
Push button and rocker switch
Top push button . Contacts: Silver Plated
. Rated amperage 3 A inductive . Rated amperage: 16 A / 250 VAC
. Life: > 100,000 cycles 3 A / 24 VDC
. Protection Class: IP64 . Electrical Life: > 100.000 cycles
. Mechanical Life: > 3.000.000 cycles
. Protection Class: IP54
IL-0000 IL-0100
No Push Button Top Push Button
(NO circuit) IC-0000 IC-0100 IC-0200
No Push Button Top Push Button Top Rocker Switch
(NO circuit)
Complete Ordering Information : See Page 35 Complete Ordering Information : See page 35
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 38
JOYSTICKS
. Material: Thermoplastic . Multi-functions ergonomic grip Gear type with on/off and
. Colour: Black proportional switches
. Operating temperature range: -25 °C / + 85°C . Easy adaptability to existing joystick control lever
. Connecting hub: Female thread / M10 x 1,5
. Protection Class: IP65 (plain grip)
Electrical Specifications
P9 - Push buttons
. No. of push buttons on rear panel: up to 3
. Rated amperage 3 Amp inductive
. Life: > 100,000 cycles
. Available colours: red, blue, yellow, black, green, white
IE-0000-1PRS 0 0 1xPRS
IE-A1P9-1PRS yes 1XP9 1xPRS
IE-0000-1FPR 0 0 1xFPR
IE-A1P9-1FPR yes 1XP9 1xFPR
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 39
JOYSTICKS
Features
Mechanical Specifications
. Material: Thermoplastic
. Colour: Black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection Class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
. Prewired exit cable: 250 mm
P9 - Push buttons
MS-0000-0000 0 0
MS-A000-0000-0000 yes 0
Mod. MS-A6P9-R3P9
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 40
JOYSTICKS
Features
. Optimum ergonomic design
. High perfomance switches
Mechanical Specifications
. Material: thermoplastic
. Colour: black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
. Prewired exit cable: 250 mm
P9 - Push buttons
. Rated amperage up to 5 A resistive
up to 3 A inductive
. Operational life: > 100,000 cycles
. Available colours: red, blue, yellow, black. green, white
. Protection Class: IP64 (IP68 available)
. Button and bezel material: thermoplastic
. Contacts: gold plated silver alloy
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 41
JOYSTICKS
Features
. Optimum ergonomic design
. Internal PWM driver
Mechanical Specifications
. Material: thermoplastic
. Colour: black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
P9 - Push buttons
. Rated amperage: up to 5 A resistive
up to 3 A inductive
. Operational life: > 100,000 cycles
. Available colours: red, blue, yellow, black. green, white
. Protection Class: IP64 (IP68 available)
. Button and bezel material: thermoplastic
. Contacts: gold plated silver alloy
Configuration Examples
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 42
JOYSTICKS
Features
. Optimum ergonomic design
. High perfomance switches
Mechanical Specifications
. Material: thermoplastic
. Colour: black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
. Prewired exit cable: 250 mm
P9 - Push buttons
MG-0000-0000 0 0
MG-A000-0000-0000 yes 0
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 43
JOYSTICKS
Features
. Optimum ergonomic design
. High perfomance switches
Mechanical Specifications
. Material: thermoplastic
. Colour: black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
. Prewired exit cable: 250 mm
P9 - Push buttons
. Rated amperage up to 5 A resistive
up to 3 A inductive
. Operational life: up to 100,000 cycles
. Available colours: red, blue, yellow, black. green, white
. Protection Class: IP64 (IP68 available)
. Button and bezel material: thermoplastic
. Contacts: gold plated silver alloy
PRS Proportional Rocker Switch See PRS Data sheet D-man Front Front Rear Rear
. Output signal: 3-pins resistive pot P/B P/B FPR P/B FPR
4-pins / Center tap MG-01P9-1FPR-0000 0 1xP9 1xFPR
MG-A2P9-1FPR-0000 yes 2xP9 1xFPR
Overall Dimensions MG-A3P9-1FPR-R1P9 yes 3xP9 1xFPR 1xP9
127 MG-A4P9-1FPR-R2P9 yes 4xP9 1xFPR 2xP9
93 34 MG-A4P9-1FPR-F1P9 yes 4xP9 1xFPR 1xP9 1xFPR
M14x1,5
Ø68
34
83
Complete Ordering Information : See Also Page 37
Mod. MG-A000-3FPR
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 44
JOYSTICKS
Features
. Optimum ergonomic design
. Internal PWM driver
Mechanical Specifications
. Material: thermoplastic
. Colour: black
. Operating temperature range: -25 °C / + 85°C
. Connecting hub: Female thread / M14 x 1,5
. Protection class: IP65 with plain grip (IP 67 with
special assembly on request)
IP54 with dead man trigger option
Electrical Specifications
. Prewired exit cable: 250 mm
P9 - Push buttons
. Rated amperage up to 5 A resistive
up to 3 A inductive
. Operational life: up to100,000 cycles
. Available colours: red, blue, yellow, black. green, white
. Protection Class: IP64 (IP68 available)
. Button and bezel material: thermoplastic
. Contacts: gold plated silver alloy
Configuration Examples
144
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone +39 059 254895 • Fax +39 059 253512 • E-mail: tecnord@tecnord.com
JOYSTICKS - page 45