Transportide Industrial Limited provides technical specifications for two fabric conveyor belt options. Belt 1 is a 48" belt with an EP500/3-6+2 grade and tensile strength over 500 N/mm. Belt 2 is a 90" belt with an EP800/4-8+2 grade and tensile strength over 800 N/mm. Both belts meet various DIN standards for dimensions, thickness, unit weight, rubber grade, tensile strength, and adhesion.
Transportide Industrial Limited provides technical specifications for two fabric conveyor belt options. Belt 1 is a 48" belt with an EP500/3-6+2 grade and tensile strength over 500 N/mm. Belt 2 is a 90" belt with an EP800/4-8+2 grade and tensile strength over 800 N/mm. Both belts meet various DIN standards for dimensions, thickness, unit weight, rubber grade, tensile strength, and adhesion.
Transportide Industrial Limited provides technical specifications for two fabric conveyor belt options. Belt 1 is a 48" belt with an EP500/3-6+2 grade and tensile strength over 500 N/mm. Belt 2 is a 90" belt with an EP800/4-8+2 grade and tensile strength over 800 N/mm. Both belts meet various DIN standards for dimensions, thickness, unit weight, rubber grade, tensile strength, and adhesion.
Specification: Belt Pos.: 1 2 File No.: 48" EP500/3 -6+2 90" EP800/4 - 8+2 GRADE X GRADE X Tests Based on Unit Transportide's Data Transportide's Data 1. Belt Tensile Strength DIN 22102 N/mm >500 >800 2. Belt Dimension 2.1 Belt width DIN 22102 mm 1219+/-10 2286+/-8 2.2 Total thickness DIN 22102 mm 11+/-1 14.5+/-1 2.3 Edge rubber width DIN 22102 mm max. 15 max. 15 2.4 Top rubber cover thickness DIN 22102 mm 6+/-0.5 8+/-0.5 2.5 Bottom rubber cover thickness DIN 22102 mm 2+/-0.5 2+/-0.5 2.6 Belt Unit Weight DIN 22102 Kg/m 15.8(approx.) 39.7(approx.) 2.7 Required Quantity M 58 138 2.8 Supplied Quantity M 58 138 2.9 Roll Length DIN 22102 % L + 2/ - 0 L + 2/ - 0 5. Belt Covers 5.1 Rubber Grade DIN 22102 - X X 5.2 Specific Gravity DIN 53479 g/cm^3 1.2± 0.015 1.2± 0.015 5.3 Minimum Tensile Strength DIN 53504 Min. 25 Min. 25 5.4 Minimum Elongation at Break DIN 53504 % Min. 450 Min. 450 5.5 Tensile Strength after Aging (70+/-1 °C x 7 days) DIN 53508 % ± 25 ± 25 5.6 Elongation after Aging (70+/-1 °C x 7 days) DIN 53508 % ± 25 ± 25 5.7 Abrasion DIN 53516 mm^3 Max.120 Max.120 5.8 Hardness DIN 53505 shore A 65 ± 5 65 ± 5 7. Adhesion ISO 8094,DIN 53507, 7.1 Adhesion strength (top cover /ply ) DIN 22102-3 N/mm Min.5.5 Min.5.5 ISO 8094,DIN 53507, 7.2 Adhesion strength (bottom cover /ply ) DIN 22102-3 N/mm Min.5.5 Min.5.5 ISO 8094,DIN 53507, 7.3 Adhesion strength (ply /ply ) DIN 22102-3 N/mm Min. 6.5 Min. 6.5 8. Elongation at standard load(static loading) DIN 22102 % ≤1.5 ≤1.5