This document contains the parameters and results for a linear sweep voltammetry test performed on an unknown electrode using a potentiostat. The test was run from -0.8V to 0.001V at a scan rate of 100 mV/s, recording current measurements at 46 data points. The document lists the test settings, equipment information, and a table of potential, time, current, and other data values measured during the voltammetry scan.
This document contains the parameters and results for a linear sweep voltammetry test performed on an unknown electrode using a potentiostat. The test was run from -0.8V to 0.001V at a scan rate of 100 mV/s, recording current measurements at 46 data points. The document lists the test settings, equipment information, and a table of potential, time, current, and other data values measured during the voltammetry scan.
This document contains the parameters and results for a linear sweep voltammetry test performed on an unknown electrode using a potentiostat. The test was run from -0.8V to 0.001V at a scan rate of 100 mV/s, recording current measurements at 46 data points. The document lists the test settings, equipment information, and a table of potential, time, current, and other data values measured during the voltammetry scan.