Professional Documents
Culture Documents
and Frames
JERRY CURRIE
President and CEO
CURRIES
To meet the multitude of doorway needs in the CURRIES was established in 1958 and since 1996 has
non-residential construction industry, CURRIES been a part of the ASSA ABLOY Group. ASSA ABLOY is
manufactures a wide range of hollow metal doors and the world’s leading manufacturer and supplier of
frames for interior and exterior use. The Mason City, locking solutions, dedicated to satisfying end-user
Iowa-based company is considered the most needs for security, safety and convenience.
progressive manufacturer in its field. With combined
door and frame manufacturing plants totaling 456,000
square feet, CURRIES has one of the largest production
facilities in the industry. The state-of-the-art
manufacturing plant and shipping center facilitates a
quick response on large and small custom and
standard orders. CURRIES’ updated roll forming
equipment is part of the technology that ensures
consistent, timely products to the market.
Contents
Introduction ........................................................1
Doors and Frames Overview ............................2 For Sales, Marketing & Service Support
ASSA ABLOY Door Security Solutions ..........3 ASSA ABLOY Door Security Solutions
Composite Core Doors ................................4-5 ASSA ABLOY Door Security Solutions sales teams and
Steel Stiffened Core Doors ..........................6-7 specification consultants, located throughout the U.A.,
work with distributors and end-users to ensure complete
Windstorm Products ........................................8
life-safety and security solutions for commercial facilities.
Specialty and Preassembled Assemblies ....9
This is achieved by understanding end-user needs and NOTE: CURRIES has provided soft metric conversion
Flush Door Options ..................................10-11 incorporating products from industry-leading door and equivalents for the majority of critical product
Masonry/Flush Frames ....................................12 hardware brands. Support services include architectural dimensions throughout this book. The numbers listed
Drywall Frames ..................................................13 education, technical expertise, and assistance with code in parenthesis next to a key dimension are metricated
compliance. Visit www.assaabloydss.com to learn how we millimeters in accordance with the Metric Conversion
Specialty Frames ..............................................14
can help with your security and life-safety needs. Act of 1975.
Frame Details ..............................................15-16
Fire Labeled Doors ..........................................17 Phone: 1-800-DSS-EZ4U (377-3948)
www.curries.com
Address: 110 Sargent Drive
Fire Labeled Frames ..................................18-19
New Haven, CT 06511 Visit www.curries.com for complete product
ADA Compliance &
Web site: www.assaabloydss.com information and downloadable specifications for the
ASTM/ANSI Test Information ........................20 entire CURRIES product line. The site is updated
Testing & Technical Email: Contact your local Door Security Solutions frequently with news about timely industry-related
Information ..................................................21 representative via email by going to assaabloydss.com issues. A map of the U.S. links to information on
and clicking on “Service & Support”. CURRIES distributors for every state.
This brochure effective as of January 2008
Introduction
ASSA ABLOY, the global leader
in door opening solutions
Industry Leadership
CURRIES, along with other ASSA ABLOY Group brands, CURRIElumTM and LiteGuideTM
leads the industry in providing reliable security and CURRIElum and LiteGuide answer an important life-
life-safety solutions that are easy to install and safety challenge by illuminating exit locations to
maintain. Several recent innovations specifically facilitate quick and safe egress. CURRIElum frames
address these needs. have a special channel that houses and protects a
highly-visibly lighting strip, making the doorway easy
ElectroLynx® to locate, especially in dark or smoky conditions.
ElectroLynx is a system of universal plug-in connectors Doors may also be equipped with low level exit
and standardized color-coded wiring that makes signage. Together with the exit hardware components
installation of electrified openings a snap. Doors, of the LiteGuide system from ASSA ABLOY brands, the
frames and hardware are pre-wired with plug-in entire system makes facilities safer.
connectors that snap together to create a fully-wired
opening. The plugs and wires are concealed to To learn more about the options available for
preserve the aesthetics of the opening and facilitate CURRIElum, go to page 14 or visit www.curries.com and
future hardware charges. view the tech data manual. For more information on the
complete LiteGuide system, visit www.liteguide.com.
For more information, visit www.assaabloydss.com/products.
ReadySet®
Hardwiring Made Easy TM When customers opt for the ReadySet system from
ASSA ABLOY brands, openings arrive at the jobsite fully
prefinished and preassembled, with all hardware
installed and ready to use. Final installation of the
opening takes under 10 minutes and punchlist items
are virtually eliminated. This system is possible due to
the patent-pending 2-piece frame from CURRIES.
Openings are available with a multitude of choices for CURRIElum frame shown in darkness and under normal conditions
(with exit hardware by SARGENT for a complete LiteGuide opening).
hardware (mechanical and electromechanical),
finishes, and more.
CURRI Doors
Combines the beauty of wood with the Doors are factory prime painted and stained (six
durability of steel standard color finishes available) to produce a door
face similar in appearance to wood yet with the same
CURRIES 707 and 727 Series doors are available with strength and durability of steel. Products may be fire
steel faces that contain a wood-grained .005" deep listed according to the appropriate door series
embossment pattern in the steel. construction.
CURRI
Available in six colors!
2
ASSA ABLOY Door Security Solutions Field Support
ASSA ABLOY, the global leader
in door opening solutions
Southwest Service Center, Los Angeles, CA For more information, contact the service center nearest you
Phone: 951-371-5600 Fax: 951-371-6095 or visit www.assaabloydss.com/salessupportlocator.
Southeast Service Center, Atlanta, GA ASSA ABLOY Door Group Service Centers - Overview
Phone: 770-941-9012 Fax: 770-941-9123
of Benefits and Capabilities:
Midwest Service Center, Chicago, IL • Licensed to fire label products to meet regional
Phone: 630-682-8800 Fax: 630-682-8803
building codes
Northwest Service Center, Seattle, WA • Centers offer distributors same day pick-up or
Phone: 253-872-8174 Fax: 253-872-0121 shipping of instock products
Mid Atlantic Service Center, Easton, PA • Some centers provide full service welding of frames
Phone: 610-559-2180 Fax: 610-559-2190 shipped from the CURRIES factory
• Some centers act as “break bulk” shipping centers for
South Central Service Center, Dallas, TX
Phone: 972-272-0271 Fax: 972-272-7829 products shipped into that region of the country
• Cost savings from local frame welding and bulk
Florida Service Center, Orlando, FL
shipping - contact CURRIES Customer Service for
Phone: 407-851-1183 Fax: 407-851-7867
freight comparisons
New England Service Center, Hartford, CT • Reduced incidence of freight damaged goods
Phone: 860-292-5360 Fax: 860-292-5365
3
Composite Core Doors
ASSA ABLOY, the global leader
in door opening solutions
Embossed
Panel Version
of 707
Hinge Rail Full Height Channel Full Height Channel, 14 Gauge Full Height Channel Full Height Channel
and Reinforcement 14 Gauge Extruded* to Extruded* to 10 Gauge 12 Gauge Extruded† to 14 Gauge Extruded* to
10 Gauge Equivalent Equivalent or 12 Gauge Extruded 7 Gauge Equivalent 10 Gauge Equivalent
to 7 Gauge Equivalent
Lock Rail Full Height Channel Full Height Channel Full Height Channel Full Height Channel
16 Gauge 14 Gauge 14 Gauge 14 Gauge
Core Insulating Insulating Polystyrene Std. Mineral Core (UL Listed) Polystyrene
Polystyrene Isocyanurate Optional Fire Door Core
Face Skins 20, 18 Gauge 20, 18, 16, 14 Gauge 18, 16 Gauge 16, 14 Gauge
Bullet Resistant Plating
Sizes Available 2068 - 4070 2068 - 50100 2068 - 4080 40100 Maximum
Fire Label Ratings See Fire Labeled Doors section for complete information.
* 14 gauge steel extruded to provide equivalent thread depth of 10 gauge tapped holes.
† 12 gauge steel extruded to provide equivalent thread depth of 7 gauge tapped holes.
4
Composite Core Doors
ASSA ABLOY, the global leader
in door opening solutions
Specifications
607 Series Specifications continuous one piece channel, formed and tapped for 737 Series Specifications
hinges. Top and bottom of the door shall be closed
Doors shall be 607 Series as manufactured by CURRIES, with 16 gauge channels. Doors shall have beveled 1/8" Doors shall be 737 Series as manufactured by CURRIES,
Mason City, Iowa. Doors are to be manufactured of the (3) in 2" (51) lock edge and square hinge edge. Doors Mason City, Iowa. Doors are to be manufactured of the
finest quality 18, 20 (specify gauge) cold rolled shall be thoroughly cleaned and receive an iron finest quality 14, 16, (specify gauge) cold rolled
stretcher leveled steel. All doors shall be full flush phosphate treatment prior to receiving one coat of stretcher leveled steel or galvannealed steel (specify).
construction 1-3/4" (44) thick. Doors shall be prime paint. Minimum hardware reinforcement shall All doors shall be full flush construction and 1-7/8"
reinforced, stiffened, insulated, and sound deadened consist of the following: Closers – Overhead Holders – (48) thick. Doors shall be reinforced, stiffened,
with a solid polystyrene foam board permanently Rim Panics, 14 gauge channels; Butts and Locks as insulated, and sound deadened with a solid
bonded to the inside of each face skin. The lock and previously specified herein. Floor Closers and Pivots – 7 polystyrene foam board permanently bonded to the
hinge edge of each door shall be welded with a gauge x template requirements. inside of each face skin. Integral armor plating inside of
centered hairline seam the full height of the door the door shall provide bullet resistive properties in
(607S). The lock edge shall be reinforced full height by 727 Series Specifications accordance to UL Level 2, HPSA listing. The lock and
a 16 gauge continuous one piece channel x extruded Doors shall be 727 Series as manufactured by CURRIES, hinge edge of each door shall be welded with a
templating. The hinge edge shall be reinforced full Mason City, Iowa. Doors are 250 degree or 450 degree centered hairline seam the full height of the door
height by a 14 gauge continuous one piece channel, temperature rise listed products for the first 30 (737S) OR both the lock and hinge edge of each door
formed and tapped for hinges. Top and bottom of the minutes of a fire test. Doors are to be manufactured of shall be welded, filled and ground smooth (seamless)
door shall be closed with 18 gauge channels. Doors are the finest quality 16, 18, (specify gauge) cold rolled the full height of the door (737N) OR the lock and
square hinge and lock edge featuring a non-handed stretcher leveled steel or galvannealed steel (specify). hinge edge of each door may have the center seam
design. Doors shall be thoroughly cleaned and receive All doors shall be full flush construction 1-3/4" (44) continuously wire welded the full height of the door,
an iron phosphate treatment prior to receiving one thick. Doors shall be reinforced, stiffened, insulated, filled and ground smooth (737T). The lock edge shall
coat of prime paint. Minimum hardware reinforcement and sound deadened with a solid UL listed mineral be reinforced full height by a 14 gauge continuous one
shall consist of the following: Closers – Overhead core board permanently bonded to the inside of each piece channel x extruded templating. The hinge edge
Holders – Rim Panics, 14 gauge channels; Butts and face skin. The lock and hinge edge of each door shall shall be reinforced full height by a 14 gauge
Locks as previously specified herein. be welded with a centered hairline seam the full continuous one piece channel, formed and tapped for
height of the door (727S) OR both the lock and hinge hinges. Top and bottom of the door shall be closed
707 Series Specifications
edge of each door shall be welded, filled and ground with 16 gauge channels. Doors shall have beveled 1/8"
Doors shall be 707 Series as manufactured by CURRIES, smooth (seamless) the full height of the door (727N) (3) in 2" (51) lock edge and square hinge edge. Doors
Mason City, Iowa. Doors are to be manufactured of the OR the lock and hinge edge of each door may have the shall be thoroughly cleaned and receive an iron
finest quality 14, 16, 18, 20 (specify gauge) cold rolled center seam continuously wire welded the full height phosphate treatment prior to receiving one coat of
stretcher leveled steel or galvannealed steel (specify). of the door, filled and ground smooth (727T). The lock prime paint. Minimum hardware reinforcement shall
All doors shall be full flush construction and either 1- edge shall be reinforced full height by a 14 gauge consist of the following: Closers – Overhead Holders –
3/4" (44) or 1-3/8" (35) thick. Doors shall be continuous one piece channel x extruded templating. Rim Panics, 14 gauge channels; Butts and Locks as
reinforced, stiffened, insulated, and sound deadened The hinge edge shall be reinforced full height by a 12 previously specified herein. Floor Closers and Pivots – 7
with a solid polystyrene foam board permanently gauge continuous one piece channel, formed and gauge x template requirements.
bonded to the inside of each face skin. The lock and tapped for hinges. Top of the door is closed with a 12 NOTE: CURRIES bullet resistive frames must be used
hinge edge of each door shall be welded with a gauge channel and bottom of the door shall be closed with these doors.
centered hairline seam the full height of the door with a 16 gauge channel. Doors shall have beveled 1/8"
(707S) OR both the lock and hinge edge of each door (3) in 2" (51) lock edge and square hinge edge. Doors
shall be welded, filled and ground smooth (seamless) shall be thoroughly cleaned and receive an iron
the full height of the door (707N) OR the lock and phosphate treatment prior to receiving one coat of
hinge edge of each door may have the center seam prime paint. Minimum hardware reinforcement shall
continuously wire welded the full height of the door, consist of the following: Closers – Overhead Holders –
filled and ground smooth (707T). The lock edge shall Rim Panics, 14 gauge channels; Butts and Locks as
be reinforced full height by a 14 gauge continuous one previously specified herein. Floor Closers and Pivots – 7
piece channel x extruded templating. The hinge edge gauge x template requirements.
shall be reinforced full height by a 14 gauge
5
Steel Stiffened Core Doors
ASSA ABLOY, the global leader
in door opening solutions
Hinge Rail Full Height Channel Full Height Channel Full Height Channel Full Height Channel
and Reinforcement 12 Gauge Extruded† to 12 Gauge Extruded† to 12 Gauge Extruded† to 12 Gauge Extruded† to
7 Gauge Equivalent 7 Gauge Equivalent 7 Gauge Equivalent 7 Gauge Equivalent
Lock Rail Full Height Channel Full Height Channel Full Height Channel Full Height Channel
14 Gauge 14 Gauge 14 Gauge 14 Gauge
Top Channel 16 Gauge 16 Gauge 16 Gauge/Plus Flush Top 14 Gauge/Plus Flush Top
16 Gauge 16 Gauge
Stiffener Spacings 6" (152) on Vertical Supported 6" (152) on Vertical Supported 4" (102) on Vertical Supported 4" (102) on Vertical Supported
Center Lines Center Lines Center Lines Center Lines
Stiffener Welding 6" (152) 6" (152) 4" (102) 4" (102)
Vertically to Face Skins Vertically to Face Skins Vertically to Face Skins Vertically to Face Skins
Insulation Fiberglass Between Stiffeners Fiberglass Between Stiffeners Fiberglass Between Stiffeners Fiberglass Between Stiffeners
.75 (.34) Lb. Density .75 (.34) Lb. Density 1 Lb. Density 1 Lb. Density
Fire Label Ratings See Fire Labeled Doors section for complete information.
NOTE: 847 and 857 Series doors comply with Commercial Security Door Specification HMMA 862-87.
6
Steel Stiffened Core Doors
ASSA ABLOY, the global leader
in door opening solutions
Specifications
747 Series Specifications 757 Series Specifications 847 Series Specifications 857 Series Specifications
Doors shall be 747 Series as Doors shall be 757 Series as Doors shall be 847 Series 14 gauge, cold Doors shall be 857 Series 14 gauge cold
manufactured by CURRIES, Mason City, manufactured by CURRIES, Mason City, rolled or galvannealed steel as rolled or galvannealed steel as
Iowa. Doors are to be manufactured of Iowa. Doors are to be manufactured of manufactured by CURRIES, Mason City, manufactured by CURRIES, Mason City,
the finest quality 14, 16, 18, (specify the finest quality 16 gauge cold rolled Iowa. Doors shall comply with Iowa. Doors shall comply with
gauge) cold rolled stretcher leveled stretcher leveled steel or galvannealed specifications defined herein for specifications defined herein for
steel or galvannealed steel (specify). All steel (specify). All doors shall be full Commercial Security Hollow Metal Commercial Security Hollow Metal Doors
doors shall be full flush construction flush construction and 1-3/4" (44) thick. Doors and Frames. Doors shall have and Frames. Doors shall have passed
and 1-3/4" (44) thick. Doors shall be Doors shall be reinforced, stiffened, passed performance criteria set forth by performance criteria set forth by
reinforced, stiffened, insulated, and insulated, and sound deadened STC 46 nationally recognized standards such as nationally recognized standards such as
sound deadened STC 43 capable with capable with continuous 22 gauge HMMA 862-87. Removable glazing HMMA 862-87. Removable glazing stops
continuous 22 gauge vertical steel vertical steel stiffeners spaced not more stops are to be 18 gauge concealed are to be 18 gauge concealed type. Doors
stiffeners spaced not more than 6" than 6" (152) apart. The stiffener ends type. Doors shall be 1-3/4" (44) thick shall be 2" (51) thick and reinforced with
(152) apart. The stiffener ends shall be shall be welded together at the top and and reinforced with 18 gauge stiffeners 18 gauge stiffeners welded to each face
welded together at the top and bottom bottom ends, perforated flush top cap welded to each face skin 4" (102) on skin 4" (102) on center with spot welds 4"
ends. All spaces between stiffeners shall standard. All spaces between stiffeners center with spot welds 4" (102) on (102) on center the full height of the
be insulated with .75 pound density shall be insulated with .75 pound center the full height of the door. The door. The stiffener ends are to be welded
fiberglass insulation. The lock and hinge density fiberglass insulation. The lock stiffener ends are to be welded together together the full width of the supporting
edge of each door shall be welded with and hinge edge of each door shall be the full width of the supporting web web span at the top and bottom of the
a centered hairline seam the full height welded with a centered hairline seam span at the top and bottom of the door. door. The standard core shall be insulating
of the door (747S) OR both the lock the full height of the door (757S) OR The standard core shall be insulating and sound-deadening 1 lb density
and hinge edge of each door shall be both the lock and hinge edge of each and sound-deadening 1 lb density fiberglass insulation. The lock edge shall
welded, filled and ground smooth door shall be welded, filled and ground fiberglass insulation. The lock edge be reinforced full height by a 14 gauge
(seamless) the full height of the door smooth (seamless) the full height of the shall be reinforced full height by a 14 continuous one piece channel x extruded
(747N) OR the lock and hinge edge of door (757N) OR the lock and hinge gauge continuous one piece channel x templating. The hinge edge shall be
each door may have the center seam edge of each door may have the center extruded templating. The hinge edge reinforced full height by a 12 gauge
continuously wire welded the full seam continuously wire welded the full shall be reinforced full height by a 12 continuous one piece channel, formed
height of the door, filled and ground height of the door, filled and ground gauge continuous one piece channel, and tapped for hinges. Top and bottom of
smooth (747T). The lock edge shall be smooth (757T). The lock edge shall be formed and tapped for hinges. Top and the door shall be closed with 14 gauge
reinforced full height by a 14 gauge reinforced full height by a 14 gauge bottom of the door shall be closed with top and 16 gauge bottom channels. The
continuous one piece channel x continuous one piece channel x 16 gauge channels. The top of the door top of the door shall be flush with an
extruded templating. The hinge edge extruded templating. The hinge edge shall be flush with an additional 16 additional 18 gauge channel welded in
shall be reinforced full height by a 12 shall be reinforced full height by a 12 gauge channel welded in place. Doors place. Doors shall have beveled 1/8" (3) in
gauge continuous one piece channel, gauge continuous one piece channel, shall have beveled 1/8" (3) in 2" (51) 2" (51) lock edge and hinge edge. The lock
formed and tapped for hinges. Top and formed and tapped for hinges. Top and lock edge and hinge edge. The lock and and hinge edge of each door shall be
bottom of the door shall be closed with bottom of the door shall be closed with hinge edge of each door shall be welded with a centered hairline seam the
16 gauge channels. Doors shall have 16 gauge channels. Doors shall have welded with a centered hairline seam full height of the door (857S) OR both the
beveled 1/8" (3) in 2" (51) lock edge and beveled 1/8" (3) in 2" (51) lock edge and the full height of the door (847S) OR lock and hinge edge of each door shall be
square hinge edge. Doors shall be square hinge edge. Doors shall be both the lock and hinge edge of each welded, filled and ground smooth
thoroughly cleaned and receive an iron thoroughly cleaned and receive an iron door shall be welded, filled and ground (seamless) the full height of the door
phosphate treatment prior to receiving phosphate treatment prior to receiving smooth (seamless) the full height of the (857N) OR the lock and hinge edge of
one coat of prime paint. Minimum one coat of prime paint. Minimum door (847N) OR the lock and hinge each door may have the center seam
hardware reinforcement shall consist of hardware reinforcement shall consist of edge of each door may have the center continuously wire welded the full height
the following: Closers – Overhead the following: Closers, 14 gauge seam continuously wire welded the full of the door, filled and ground smooth
Holders – Rim Panics, 14 gauge channels; Butts and Locks as previously height of the door, filled and ground (857T). Doors shall be thoroughly cleaned
channels; Butts and Locks as previously specified herein. smooth (847T). Doors shall be and receive an iron phosphate treatment
specified herein. Floor Closers and thoroughly cleaned and receive an iron prior to receiving one coat of prime paint.
Pivots – 7 gauge x template phosphate treatment prior to receiving Minimum hardware reinforcement shall
requirements. one coat of prime paint. Minimum consist of the following: Closers –
hardware reinforcement shall consist of Overhead Holders 12 gauge channels –
the following: Closers – Overhead Rim Panics, 14 gauge channels; Butts and
Holders 12 gauge channels – Rim Locks as previously specified herein. Floor
Panics, 14 gauge channels; Butts and Closers and Pivots – 7 gauge x template
Locks as previously specified herein. requirements.
Floor Closers and Pivots – 7 gauge x
template requirements.
7
Windstorm Products
ASSA ABLOY, the global leader
in door opening solutions
Windstorm-Certified Products
CURRIES Windstorm-Certified products have been the opening. Code officials have standardized this applied to the assemblies. Light steel and wood frame
tested to the requirements for hurricane-prone and data for construction in regions of the country wall construction assemblies are available as well.
wind-borne debris regions as defined in the susceptible to violent wind storms in attempts to
Hardware requirements vary with each assembly and
International Building Code (IBC) certified by Florida safeguard the public health, safety, and general
the performance level required for a particular
Building Commission, Dade County, and Intertek welfare through requirements for buildings and other
openings location in a building.
agencies. the product matrix included here is a small structures sited in these hurricane prone areas.
portion of CURRIES overall product mix meeting the Additional design pressure listed products and
CURRIES door series 607, 707, 727 and 747 have
IBC performance criteria. Assemblies are tested for current listed hardware items can be found at
achieved various levels of performance listings. The
design pressures, impact resistance, glass and glazing www.curries.com. Click “products” and “Windstorm.”
standard full perimeter channel construction on all
materials and specific commercial hardware Direct links to the certifying agencies listings will
door series prove its worth throughout this rigorous
applications. Locations of these openings on exteriors provide a complete list of the specific products
regimen of physical testing of door and frame
of buildings plus the location of the buildings needed to specify these assemblies.
assemblies. Flush M Series frames dominate this
determine the benchmark performance required of
criteria used in masonry walls to withstand the forces
8
Specialty and Preassembled Assemblies
ASSA ABLOY, the global leader
in door opening solutions
1. Preassembled
opening arrives
ReadySet ®
In less than 10 minutes a complete doorway can be
installed, thanks to the ReadySet system. ReadySet
2. Set assembly in doorways are shipped to the jobsite fully
opening preassembled and pre-tested for functionality, ready
for final installation at the end of the project cycle.
There’s no need to install door and hardware
3. Add trim of 2-piece components on site and punch list items are virtually
frame eliminated.
9
Flush Door Options
ASSA ABLOY, the global leader
in door opening solutions
• Reasonably priced
10
Flush Door Options
ASSA ABLOY, the global leader
in door opening solutions
Astragals Z Astragals
N
Intermittent edge welded, 50% 1" (25) wide
filled and ground smooth Free x
Air 1" (25) high
T
Seam wire welded full length
and ground smooth
11
Masonry/Flush Frames
ASSA ABLOY, the global leader
in door opening solutions
M Series/Jamb Depths
Overview 3" (76) to 14" (356), 1/8" (3) Increments
CURRIES offers a complete line of flush frames that are Specifications
available in 18, 16, 14, and 12 gauge cold-rolled or Frames shall be M Series as manufactured by CURRIES
galvannealed steel and in 16 or 14 gauge stainless of Mason City, Iowa. Frames are to be fabricated of
steel. Frames can be knocked down, set up and spot either cold-rolled or galvannealed steel (as specified)
welded at miters, or set up and arc welded at miters of either 18, 16, or 14 gauge. Joints are to be die-
and ground smooth. The 12 gauge frames are saw mitered with integral tabs for reinforcement and
miter welded or saw butt end welded, corner interlocking of the jambs to the head. 12 gauge frames
construction only. They are available for either 1-3/8" are saw miter or saw butt end corner construction. Welded and ground
(35) or 1-3/4" (44) thick doors. CURRIES frames are Frames shall be knock-down or set-up and welded. smooth corner
manufactured for all wall conditions such as masonry, Frames shall be thoroughly cleaned and receive an iron Mitered
knock-down
steel stud, wood stud, and poured concrete. phosphate treatment prior to receiving one coat of corner
• Frame face Variables: baked on prime paint. Frames are to be reinforced only
CURRIES offers pre-engineered, knock-down (KD) for surface mounted hardware, with drilling and 4" (102)
flush frames with face dimensions of 1" (25), Head
tapping to be done in the field by others. Metal plaster
through 4" (102) in 1/8" (3) increments.
guards are to be provided for all mortise cutouts.
• Frame return variables from 7/16" (11) through
1" (25). Minimum requirements for hardware reinforcements Strike Reinforcing-14 gauge conforming to template
• Non-door rabbet variables from 5/8" (16) through are to be as follows: Hinge Reinforcing-7 gauge, Lock requirements and closer reinforcing-14 gauge.
6" (152).
• Frame sizes available to match door sizes, in
any combination of singles or pairs. Non-
standard width or height frames are available on
* 1" (25) through 4" (102) in 1/8" (3) increments
" " "
special order.
" " " "
- "
- " - "
- "
- "
- " - "
- "
NOTE: 5-3/4" (146) jamb-depth frames have 7/16" (11) back bend.
Anchors
CURRIES offers standard anchors for masonry,
wood studs, steel studs, and solid partitions.
Anchors are available either loose or welded in.
Masonry “T” Existing Fixed base Wire masonry Multi-purpose Steel stud Wood stud Adjustable base
anchor Labeled opening anchor anchor anchor channel anchor anchor
masonry anchor anchor
strap anchor
12
Drywall Frames
ASSA ABLOY, the global leader
in door opening solutions
CM Series Frames - -
1-1/2" (38)
- - 1-3/4" (44)
2" (51)
Frames shall be CM Series as manufactured by CURRIES
of Mason City, Iowa. Frames are to be fabricated of
-
either cold rolled or galvannealed steel (as specified) o - -
-
either 18, 16, or 14 gauge. Frames shall be welded -
Finished 9 8
2. If a wrap around (optional) base anchor is used, opening 3 4
Note: 2" (51)
notch the drywall in that area. width face, see 1a 5
2 7 6 7
1-1/2" (38),
3. Retract the compression bars in the jambs and 1-3/4" (44)
install one jamb in position on the wall. face, see 1b.
13
Specialty Frames
ASSA ABLOY, the global leader
in door opening solutions
CURRISeal Frames
CURRISeal is an integrally gasketed, one piece hollow WC Series Frames – Drywall UL 1784 Air Leakage Test of Door Assemblies, ASTM E-283
metal door frame. Gaskets installed in the integral kerf Air Infiltration, and UBC 3305 Air Leakage Test of Door
significantly reduce air flow between the door and Frames shall be WC Series as manufactured by CURRIES Assemblies; they can be UL listed fire door frames up to
frame. Assemblies can be fire rated up to 3 hours and of Mason City, Iowa. Frames are to be fabricated of and including 3 hour ratings. Frames shall be thoroughly
have been tested by ANSI/NFPA 105, UL 1784, ASTM E- either cold rolled or galvannealed steel (as specified) cleaned and receive an iron phosphate treatment prior
283, and UBC 3305 or UBC 1004.3.4.3.2.1 Test Criteria. of 18, 16, or 14 gauge. Frames shall have a 1/8" (3) to receiving one coat of baked on prime paint. Frames
integral kerf formed into the frame soffit to receive are to be reinforced only for surface mounted hardware,
WM Series Frames – Masonry CURRIES listed gasket sets. Frames shall be knock- with drilling and tapping to be done in the fields by
Frames shall be WM Series as manufactured by CURRIES down, double return back bend (to prevent cutting others. Minimum requirements for hardware
of Mason City, Iowa. Frames are to be fabricated of either into the wall) flush hairline seam miter at the corner of reinforcements are to be as follows: Hinge Reinforcing-7
cold rolled or galvannealed steel (as specified) of 18, 16, the head and the jamb, and the corner reinforced with gauge, Lock Strike Reinforcing-14 gauge conforming to
or 14 gauge. Frames shall have a 1/8" (3) integral kerf a concealed clip. Each jamb is to have one compression template requirements and closer reinforcing-14 gauge.
formed into the frame soffit to receive CURRIES listed anchor to securely hold the frame between the studs All hardware must be compatible with CURRIES
gasket sets. Joints are to be die-mitered with integral and maintain proper alignment. Frames comply with listing for this product.
tabs for reinforcement and interlocking of the jambs to NFPA 105 Smoke and Draft Control Door Assemblies,
the head or frame or corners shall be full saw miter or
saw butt end and have factory welded corners. Frames
comply with NFPA 105 Smoke and Draft Control Door "
" " - "
- " " " "
Assemblies, UL 1784 Air Leakage Test of Door - "
"
Assemblies, ASTM E-283 Air Infiltration, and UBC 3305
Air Leakage Test of Door Assemblies; they can be UL
listed fire door frames up to and including 3 hour Knock-down
" " "
ratings. Frames shall be thoroughly cleaned and receive frame corner
an iron phosphate treatment prior to receiving one coat
of baked on prime paint. Frames are to be reinforced 1-3/4" (44)
door
only for surface mounted hardware, with drilling and 3/16” (5)
tapping to be done in the field by others. Metal plaster - " 1/2" (3)
- "
guards are to be provided for all mortise cutouts.
Minimum requirements for hardware reinforcements are
- "
to be as follows: Hinge Reinforcing-7 gauge, Lock Strike
CURRIseal KD CURRIseal KD CURRIseal KD
Reinforcing-14 gauge conforming to template Gauge 18-16-14* Gauge 18-16-14* Gauge 18-16-14*
requirements and closer reinforcing-14 gauge. All Jamb depth 4-1/8" (105) Jamb depth 5-1/4" (133) Jamb depth 4-1/8" (105) CURRIseal
hardware must be compatible with CURRIES listing for through 14" (356) through 14" (356) through 14" (356)
this product.
* 14 Gauge 2" face only
Thermal Break Frames CURRIElum Frames
Heat loss is greatly reduced—frost and condensation on CURRIElum frames play an integral role in the LiteGuide • LG3 option features a channel on the frame face to
the interior door frame face are successfully combated System offered by ASSA ABLOY. Five frame preparation accommodate the egress marking product and
—with Thermal Break Hollow Metal Door Frames from options complete any jobsite need for emergency exit necessary junction box features at the base on each side
CURRIES. lighting. Frame profiles available with the CURRIElum of the frame opening.
feature include, M, CM, WM, and WG (note these frames • LG4 features the ability to be a stand-alone exit as this
This is accomplished with a strategically-placed closed are saw miter welded corner construction). Frames are frame has the channel on the frame face, junction boxes
cell polyethylene foam barrier that provides a positive available in 16 or 14 gauge steel, 4" face heads are not at the frame base on each jamb and a junction box at the
thermal break within the frame profile and thereby available. Assemblies can be fire rated. Jamb depths 3" top of the frame for power access to feed the system by
delivers maximum protection against cold penetration. through 14". Frame assembly options include: itself from an outside supply.
• LG5 frame option is a stand-alone frame intended for use
Mullions used in CURRIES hollow metal sidelite and • LG1 - prewired By-Pass Frame preparation that allows
with a photoluminescent strip placed in the preformed
the E-Lume-A-PathTM (ELAP) egress marking product to
borrowed lite frames feature the same basic thermal channel in the frame face. The strip is by others.
be connected through the frame system to continue the
break design as CURRIES’ regular thermal
egress path lighting from the opposite door jamb Optional accessories available include a FLATLITE Kit
break frames.
without illuminating the frame perimeter. consisting of a lamp power supply, connector system, and
• LG2 - prewired By-Pass Frame preparation the same as clear PVC extrusions, for up to an 8080 opening.
LG1 but also includes additional preparations for power Connection kit includes raceway ends, screws, and hole
to the ELAP system and power control of any electrified plugs to ELAP and powered by ELAP.
hardware and its options.
14
Frame Details
ASSA ABLOY, the global leader
in door opening solutions
Equal
1/2" (13) 4" (102) min.
14" (356) max.
1-3/8"
5/8" (16)
(35)
2"
(51)
Lead-Lined Frames
Lead lining is furnished by the X-ray contractor and
can be installed at the factory. When used with
lead-lined doors, it ensures complete X-ray
protection. When specified, struts welded to the
jambs and extended to the slab above provide more
rigid anchorage.
Custom Profiles
A B D F G H 275 I L
15
Frame Details
ASSA ABLOY, the global leader
in door opening solutions
Nominal Height
Actual Height
1-3/4" (44) frames 1-3/4" (44) frames 1-3/8" (35) frames 1-3/8" (35) frames 1-3/4" (44) Dutch frames
Three hinges Four hinges Two hinges Three hinges Four hinges
Nominal Height
Actual Height
HINGE BACKSET 5/16" (8)
Single door clearances
Actual Height
Size A B C D E F
6'8" (2032) 9-3/4" (248) 29-15/16" (760) 10-3/8" (264) 40-5/16" (1024) — —
7'0" (2133) 9-3/4" (248) 31-15/16" (811) 10-3/8" (264) 40-5/16" (1024) — —
7'2" (2184) 9-3/4" (248) 32-15/16" (837) 10-3/8" (264) 40-5/16" (1024) — — Floor
Line
HINGE BACKSET 5/16" (8)
3/32" (2) Nominal Width 3/32" (2)
Actual Actual
1-3/4" (44) Dutch Frames — Four Hinges 1/8 (3)
Width Width
3/16" (5)
Size A B C D E F 5/8 (16) standard undercut
6'8" (2032) 7-1/4" (184) 24-1/4" (616) 13-1/2" (343) 22-3/4" (578) 12-1/4" (311) 35" (889) 1-3/4" (44) door
7'0" (2133) 7-1/4" (184) 28-1/4" (718) 13-1/2" (343) 22-3/4" (578) 12-1/4" (311) 35" (889) 3/4 (19) standard undercut
7'2" (2184) 7-1/4" (184) 30-1/4" (768) 13-1/2" (343) 22-3/4" (578) 12-1/4" (311) 35" (889) 1-3/8" (35) door
Nominal Height
Actual Height
7'10"(2388) 7-1/4" (184) 35-1/4" (895) 16-1/2" (419) 22-3/4" (578) 12-1/4" (311) 35" (889) Pair doors clearances
8'0" (2438) 7-1/4" (184) 37-1/4" (946) 16-1/2" (419) 22-3/4" (578) 12-1/4" (311) 35" (889)
HINGE BACKSET 5/16" (8), SHELF HEIGHT IS 42" (1067) STANDARD
Floor
Line
16
5/8 (16) standard undercut
1-3/4" (44) door
Fire Labeled Doors
Opening Opening
ASSA ABLOY, the global leader Size Feet (mm) Size Feet (mm)
in door opening solutions 3070 3'0"x7'0" (914x2134) 6070 6'0"x7'0" (1829x2134)
3672 3’6"x7'2" (1067x2184) 6080 6'0"x8'0" (1829x2438) UL 10B only
3872 3'8"x7'2" (1118x2184) 8070 8'0"x7'0" (2438x2134)
4070 4'0"x7'0" (1219x2134) 8080 8'0"x8'0" (2438x2438) UL 10B and UL 10C
4080 4'0"x8'0" (1219x2438) 80100 8'0"x10'0" (2438x3048) joint capability
40100 4'0"x10'0" (1219x3048)
Series L607 L607 L707 L707 L707 L707 L707 L727 L747 L747 L757 L847 L857
Gauge 20 or 18 20 or 18 20 20 or 18 18 or 16 14 20, 18,16 18 or 16 18 or 16 14 16 14 14 or 12
Thickness Inches 1-3/4" 1-3/4" 1-3/4" 1-3/8" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2"
Thickness (mm) (44) (44) (44) (35) (44) (44) (44) (44) (44) (44) (44) (44) (51)
NOTE 1: Requires use of Firelite® brand ceramic glass, minimum stop height 5/8" (16). Firelite is a registered trademark of Nippon Electric Glass Co., Ltd.
NOTE 2: Requires use of 1/4" (6) thick listed wired glass, minimum stop height 5/8" (16).
NOTE 3:
NOTE 4:
Requires use of Firelite brand ceramic glass, max. individual glass size 36" (914) wide x 54" (1372) high, not to exceed 1296 sq. in. (836,127), per leaf minimum stop height 5/8" (16). multiple lites allowed.
Requires use of Firelite brand ceramic glass, max. individual glass size 36" (914) wide x 36" (914) high, or 24" (610) wide x 54" (1372) high minimum stop height 5/8" (16); max. of1296 sq. in. per leaf. 17
Fire Labeled Frames
ASSA ABLOY, the global leader
in door opening solutions
a b c d e f g h
CURRIES fire doors and frames are available with Double Egress: Fire Window Frame – 3/4 Hour Rated For Use On A
either Underwriters Laboratories, Inc., or Warnock Jamb Depth: 4-3/4" (121) min., 14" (356) max. Drywall Sill
Hersey International Labels. Mullion Depth: 4-3/4" (121) min., 14" (356) max. Max. Size: 10'0" (3048) wide x 5'1" (1549) high
Head Face Dimension: 1-3/8" (35) min., 4" (102) max. Jamb Depth: 4-1/2" (114) min., 14" (356) max.
a Single Swing Frame – 3 Hour Rated Jamb Face Dimension: 2" (51) min., 4" (102) max. *Face Dimension: 1-1/2" (38) min., 12" (305) max.
Max. Size: 4'0" (1219) wide x 10'0" (3048) high Mullion Face Dimension: 2" (51) min., 4" (102) max. Material Thickness: 16 gauge min.,
Jamb Depth: 4" (76) min., 14" (356) max. Limitations: 1-1/2 hour (B) rated doors may be 12 gauge max.
Face Dimensions: Masonry 1" (25) to 6" (102) installed into this opening. Four doors in any Max. Individual Glass Size: a) 54" (1372) wide
Drywall 1-1/4" (32) to 4" (152) combination of single, pairs or double egress, x 54" (1372) high, not to exceed 1296 sq. in.
Material Thickness: 16 gauge min., Welded construction only! CURRIES steel doors (836,127) with 5/8" (16) stop height.
12 gauge max. must be used in this opening. A 3/4" (19) latch See note 2; b) 95" (2413) wide x 95" (2413) high,
Construction: Knock-Down or Welded throw is required on multiple opening frames. not to exceed 3325 sq. in. (2,145,157)
Anchors: Masonry, Wood Stud, Steel Stud minimum stop height 5/8" (16). See note 1; c) 98"
(loose or welded) f Transom Panel Frame Without (2489) wide x 98" (2489) high, not to exceed
Transom Bar – 3 Hour Rated 4704 sq. in. (3,034,833), minimum stop height
b Double Swing Frame Max. Hollow Metal Transom Panel Size: 96" (2438)
Max. Size: 3 hr. 8'0" (2438) wide x 10'0"(3048) high 5/8" (16). See note 3.
wide x 40" (1016) high Anchors: Masonry, Wood Stud, Steel Stud
Jamb Depth: 4" (76) min., 14" (356) max. Max. Frame Opening Size: 8'0" (2438)
Face Dimension: Masonry 1" (25) to 6" (152) (loose or welded)
wide x 10'0" (3048) high Fire Window Frame – 20 Minutes Without Hose
Drywall 1-1/4" (32) to 4" (152) Doors: Pairs: 8'0"x 8'0" 747 Series only
Material Thickness: 16 gauge min., Stream
Singles: 4'0" x 8'0" 707 or 747 Series Max. Size: 13'2" (4013) wide x 9'7" (2921) high
12 gauge max. Jamb Depth: 5" (127) min., 14" (356) max.
Construction: Knock-Down or Welded Jamb Depth: 4-1/2" (114) min., 14" (356) max.
Face Dimensions: 2" (51) min., 4" (102) max. *Face Dimension: 2" (51) min., 12" (305) max.
Anchors: Masonry, Wood Stud, Steel Stud Material Thickness: 16 gauge min.,
(loose or welded) Material Thickness: 16 gauge min., 12 gauge max.
12 gauge max. Max. Individual Glass Size: 109-3/4" (2788) wide
NOTE: Frames with fixed mullion available, Max. Frame Opening Size: Knock-down
Max. 8'0" (2438) high x 109-3/4" (2788) high, not to exceed 5268 sq. in.
construction 7'6" (2286) wide x 10'0" (3048) (3,398,702). See note 2.
Knock-Down Slip-On Drywall Frame – high and for welded construction 8'0" (1219) Anchors: Masonry, Wood Stud, Steel Stud
c
1-1/2 Hour Rated wide x 10'0" (3353) high (loose or welded)
Max. Size: Single 4'0" (1219) wide x 9'0" (2743) g Fire Window Frame – 1 Hour Rated
high; Pairs 8'0" (2438) wide x 7'2" (2184) h Transom And/Or Sidelite/Panel Frame
Max. Size: 10'2" (3099) wide x 10'1" (3073) high for Panel Frames – 1-1/2 Hour Rated
high or 7'0" (2134) wide x 9'0" (2743) high masonry walls or drywalls with a noncombustible
Jamb Depth: 3-1/4" (83) min. on frames up to Max. Size for Transom Panels: Steel Stiffened,
masonry sill. Polystyrene, or temp. rise core design – 96"
and including 3'6" (1067) wide x 7'0" (2134) Max. Size: 9'2-1/2" (2807) wide x 4'11 1/2"
high, 4-5/8" (117) on frames above 3'6" (1067) (2438) wide x 48" (1219) high or 96" (2438)
(1511) for drywall walls wide x 48" (1219) high, 1-3/4" (44) thick. Solid
wide x 7'0" (2134) high, 14" (356) max. Jamb Depth: 4-7/8" (124) min., 14" (356) max.
Face Dimension: 1-1/2" (38), 1-3/4" (44) Core Design, 1/2" thick 36" x 40"
*Face Dimension: 1" (25) min., 12" (305) max. Max. Size for Side Panels: Steel Stiffened,
and 2" (51) only Material Thickness: 16 gauge min.,
Material Thickness: 16 gauge and 14 gauge only Polystyrene, or temp. rise core design – 48"
14 gauge max. (1219) wide x 96" (2438) high. Solid core
with UL and WHI. Max. Individual Glass Size: 54" (1372) wide
Construction: Knock-Down Screw Lock Corner design 1/2" thick – 36" (914) wide x 40"
x 77 3/4" (1975) high, not to exceed 2721 sq. (1016) high.
Anchors: Screw Adjustable Compression Type. in. (1,755,480). See note 1.
Security anchors welded into hinge and NOTE: See Glazing Charts
Anchors: Masonry, Wood Stud, Steel Stud
strike jambs are standard. (loose or welded) i Lite Frames—3/4 Hour Rated—Max.
Fire Window Frame – 3/4 Hour Rated (Not Shown)
d Double Egress
Max. Size: 3 hr. 8'0" (2438) wide x 10'0" For Use On A Masonry Noncombustible Sill Individual Glass Size: 95" (2413) wide x 95"
(3048) high Max. Size: 13'6" (4115) wide x 12'0" (3658) high (2413) high, not to exceed 3325 sq. in.
Jamb Depth: 4-3/4" (121) min., 14" (356) max. masonry walls (2,145,157), minimum stop height 5/8" (16);
Face Dimensions: 1-3/8" (35) min., 6" (152) max. Max. Size: 11'4" (3454) wide x 10'0" (3048) high See note 1.
Material Thickness: 16 gauge min., 12 gauge max. drywalls with masonry noncombustible sill Transom Lite in a Transom/Sidelite Frame: 106"
Construction: Knock-Down or Welded Jamb Depth: 5" (127) min., 14" (356) max. (2692) wide x 36" (914) high, not to exceed 3816
Anchors: Masonry, Wood Stud, Steel Stud *Face Dimension: 2" (51) min., 12" (305) max. sq. in. (2,461,931), minimum stop height 5/8" (16).
(loose or welded) Material Thickness: 16 gauge min., See note 3.
NOTE: Double Egress frames are for use only with 12 gauge max. Sidelite in a Transom/Sidelite Frame: 98" (2489)
CURRIES UL approved metal doors or any listed Max. Individual Glass Size: a) 54" (1372) wide wide x 98" (2489) high, not to exceed 4704
double egress wood doors. x 54" (1372) high, not to exceed 1296 sq. in. sq. in. (3,034,833), minimum stop height 5/8
(836,127) with 5/8" (16) stop height. See (16). See note 3.
e Multiple Opening Frame note 2; b) 95" (2413) wide x 95" (2413) high, not Max. Size for Side/Transom Lite: 54" (1372) wide x
Max. Size: 12'8" (3861) wide x 8'2" (2489) high to exceed 3325 sq. in. (2,145,157), minimum 54" (1372) high, not to exceed 1296 sq.
Masonry and Drywall Return Frames: stop height 5/8" (16). See note 1; c) 98" (2489) in. (836,127) using 5/8" (16) high glass stop.
Jamb Depth: 4-3/4" (121) min., 14" (356) max. wide x 98" (2489) high, not to exceed 4704 See note 2.
Mullion Depth: 4-3/4" (121) min., 10-1/2" (267) max. sq. in. (3,034,833), minimum stop height 5/8"
Jamb Face Dimension: 2" (51) min., 4" (102) max. (16). See note 3.
Mullion Face Dimension: 2" (51) min., 4" (102) max. Anchors: Masonry, Wood Stud, Steel Stud
(loose or welded)
(continued on next page)
18
Fire Labeled Frames
ASSA ABLOY, the global leader
in door opening solutions
Max. Overall Frame Size: Masonry 13'6" (4115) Double Swing Frame –
wide x 11'11" (3632) high, Drywall 12'0" 1-1/2 Hour Rated
(3658) wide x 11'7" (3531) high Max Size: 8'0" (2400) wide x 8'0" (2400) high
Fire Exit Door Capabilities
Jamb Depth: 4-3/4" (121) min., Jamb Depth: 4-1/8" (102) min., 14" (356) max. Door Rating Size Gauge
14-1/2" (368) max. Face Dimensions: Min. 1" (25) Type (Max) (Max) (Face Sheet)
*Face Dimensions: 2" (51) min., 12" (305) max. Max Head: 4" (203) 607 3 Hr. 4070 (1219x2134) 18
Material Thickness: 16 gauge min., Max Jamb: 4" (102) Single 1-1/2 Hr. 4070 (1219x2134) 20-18
12 gauge max. Material Thickness: 18 gauge 607 3 Hr. 8070 (2438x2134) 18
Anchors: Masonry, Wood Stud, Steel Stud (loose Construction: Knock down or welded Pairs 1-1/2 Hr 8070 (2438x2134) 20-18
or welded) lite configurations may vary. Anchors: Masonry, wood stud, steel stud 707
3 Hr 3676 (1016x2184) 18
Wood Transom Panel: Any listed manufacturer’s wood (loose or welded) 1-3/8" (35) Single
transom panel. 707
1-1/2 Hr. 40100(1219x3048) 20-18-16-14
Transom And/Or Sidelite Frame – 1 Hour Rated Latchbolt Requirements Single
Max. Size: 10'2" (3099) wide x 10'1" (3073) high 707
607 Single: 1/2" (13) min. latch throw. 3 Hr. 8080 (2438x2438) 20-18-16
Jamb Depth: 4-7/8" (124) min., 14" (356) max. Single
607 Pairs: 5/8" (16) min. latch throw.
*Face Dimension: 1" (25) min., 12" (305) max.
707 Single: 1/2" (13) min. latch throw. 707 3 Hr. 8080(2438x2438) 18-16
Material Thickness: 16 gauge min., Pairs 1-1/2Hr. 80100(2438x3048) 20-18-16
707 Pairs: 5/8" (16) min. latch throw on pairs to 8'
14 gauge max.
(2438) high. 3/4" (19) min. latch throw on pairs 707 3 Hr. 8080(2438x2438) 20-18-16
Max. Individual Glass Size: 54" (1372) wide
to 10' (3048) high. Pairs 1-1/2Hr. 8080(2438x2438) 20-18-16
x 77 3/4" (1975) high, not to exceed 2721 sq.
727 Single: 1/2" (13) min. latch throw. 707
in. (1,755,480). See note 1. 1-1/2 Hr. 8080(2438x2438) 18-16
727 Pairs: 5/8" (16) min. latch throw. Double Egress
Anchors: Masonry, Wood Stud, Steel Stud
747 Single: 1/2" (13) min. latch throw. 707
(loose or welded) 3 Hr. 6080 (1829x2438) 18-16
747 Pairs: 5/8" (16) min. latch throw. Double Egress
747 Doors may also be prepared for two and three point 727
j Fire Window Frame – Knock-Down Construction – Drywall latching devices. 250ºF 3 Hr. 4080 (1219x2438) 18-16
Temp Rise Single
Two and three point latching devices (not including fire
Walls Only (Not Shown)
exit hardware) must be installed at the factory. 727
Max. Size: Based on max. visible glass size 250ºF 3 Hr. 8080 (2438x2438) 18-16
1 Hour Rated: 54" (1372) wide x 77-3/4" (1975) Temp Rise Single
high, not to exceed 2721 sq. in. (1,755, 480) 727
with Firelite Glass. See note 1. Other Requirements 250ºF
Temp Rise 3 Hr. 8080 (2438x2438) 18-16
20 min. without hose stream: 54" (1372) wide x • CURRIES labeled fire exit doors may be Double Egress
77-3/4 (1975) high, not to exceed 2721 sq in. prepared for any labeled fire exit 747
hardware devices. Single 3 Hr. 4080 (1219x3048) 18-16-14
(1,755,480) with Firelite glass. See note 1.
3/4 Hour Rated: a) 54" (1372) wide x 54" (1372) • Open back strikes may be used on pairs 747 8080 (2438x2438) 18-16-14
Pairs 3 Hr. 80100 (2438x3048) 18-16
high, not to exceed 1,296 sq. in. (836,127) with of 707 doors to a maximum of 8'0"
5/8" (16) stop height. See note 2. b) Max. (2184) high. 747
Pairs 1-1/2 Hr. 80100 (2438x3048) 18-16-14
Individual Glass size 95" (2413) wide x 95" (2413) • Open back strikes may be used on pairs
of 747 doors. 747
high, not to exceed 3325 sq. in. (2,145,157), Pairs 1-1/2 Hr. 80100 (2438x3048) 18-16-14
minimum stop height 5/8" (16). See note 1. • Doors that are reinforced to be provided 747
c) Max. Individual Glass size 98" (2489) wide x with fire exit hardware must bear a label Double Egress 3 Hr. 80100 (2438x2438) 18-16
98" (2489) high, not to exceed 4704 sq. in. which states “fire door to be equipped
847
(3,034,833), minimum stop height 5/8" (16). with fire exit hardware.” Single 3 Hr. 4080 (1219x2438) 14
See note 3. • Fire exit hardware may be applied 857
20 Min. Without Hose Stream Rated: 109-3/4" to doors that are not reinforced for such Single 3 Hr. 4080 (1219x2438) 14
(2788) wide x 109-3/4" (2788) not to exceed hardware by the use of sex bolts or through
5268 sq. in. (3,398,700). See note 2. bolts. These doors may not bear the label “fire
door to be equipped with fire exit hardware.” NOTE 1: Requires use of ceramic glass.
Jamb Depth: 4-1/2" (114) min., 14" (305) max.
• Double egress doors are intended to be NOTE 2: Requires use of 1/4" (6) thick listed
Material Thickness: 16 gauge min., wired glass.
12 gauge max. provided with vertical rod devices
either concealed or surface mounted. NOTE 3: Requires use of Pilkington brand 1/4" (6)
Anchors: Wood Stud, Steel Stud (loose or welded)
• Doors equipped with fire exit hardware thick wired glass with Pemko Fire Glaze
may not be provided with a louver. (FG) 3000.
k 18 Gauge Frames – Single Swing Frame –
1-1/2 Hour Rated (Not Shown) ITS only. • The door size used must not exceed the
maximum size listed for the individual * Face dimension capabilities vary with frame
Max Size: 4'0" (1200) wide x 8'0" (2400) high members.
Jamb Depth: 4-1/8" (102) min., 14" (356) max. hardware manufacturers fire exit devices.
Face Dimensions: Min. 1" (25) • Armour plating available, 48" x 48"
Max Head: 4" (203) max. size. UL 10B only
Max Jamb: 4" (102) • Stainless steel doors available.
Material Thickness: 18 Gauge UL 10B and UL 10C joint capability
• All 3 hr. pairs of doors require overlapping
Construction: Knock down or welded.
steel astragal.
Anchors: Masonry, wood stud, steel stud
(loose or welded) • All 727 pairs of doors require steel
overlapping astragal.
19
ADA Compliance and ASTM/ANSI Test Information
ASSA ABLOY, the global leader
in door opening solutions
ASTM D714—Test method for evaluating degree of ASTM A1011—Standard specification for steel, sheet ANSI A115.4—Specifications for standard steel doors
blistering of paints. and strip, hot-rolled, carbon, structural, high strength and frame preparation for lever extension flush bolts.
low-alloy and high strength low-alloy with improved
ASTM D1186—Standard test methods for non- formability. ANSI A115.5—Specifications for steel frame
destructive measurement of dry film thickness of non- preparation for 181 Series and 190 Series deadlock
magnetic coatings applied to a ferrous base. ASTM A653—Specifications for steel sheet, strikes.
zinc-coated (galvanized) or zinc iron alloy-coated
ASTM D1735—Practice for testing water resistance of (galvannealed) by the hot-dip process. ANSI A115.6—Specifications for standard steel door
coatings using water fog apparatus. and steel frame preparation for preassembled door
ASTM A924—General requirements for steel sheet locks (unit lock).
ASTM D3359—Test method for measuring adhesion by metallic coated by the hot-dip process.
tape test (paint). ANSI A115.12—Specifications for standard steel door
and steel frame preparation for offset intermediate
ASTM E90—Standard test method for laboratory Hollow Metal Industry pivot.
measurement of airborne sound transmission loss of
building partitions and elements.
Standards ANSI A115.13—Specifications for standard steel door
HMMA 861—Specifications for commercial hollow and steel frame preparation for tubular deadlocks.
ASTM E283—Test method for determining the rate of metal doors and frames.
air leakage through exterior windows, curtain walls, ANSI A115.14—Specifications for standard steel doors
and doors under specified pressure differences across HMMA 862—Specifications for commercial security for open back strikes.
the specimen. hollow metal doors and frames.
ANSI A115.15—Specifications for preparation of
ASTM E413—Classification for rating sound HMMA 867—Guide specifications for commercial 1-3/4" (44) prehung insulated steel doors and steel
transmission. laminated core hollow metal doors and frames. frames for Series 4000 bored locks and latches.
ASTM E330—Standard test method for structural ANSI/SDI A250.7—Nomenclature: standard steel doors ANSI A115.16—Specifications for preparation of
performance of exterior windows, curtain walls, and and steel door frames. prehung insulated steel doors and steel frames for
doors by uniform static air pressure difference. double type locks.
ANSI A250.10—Standard test procedure and
ASTM E1886—Performance of exterior windows, acceptance criteria for prime-painted steel surfaces for ANSI A115.17—Specifications for preparation of
curtain walls, doors, and storm shutters impacted by steel doors and frames. 1-3/8" (35) and 1-3/4" (44) standard steel doors and
missiles and exposed to cyclic pressure differentials. steel frames for double type locks.
ANSI A250.4—Test procedure and acceptance criteria
ASTM E1996—Performance of exterior windows, for physical endurance for steel doors and hardware ANSI A115.18—Preparation for bored locks and latches
curtain walls, doors, and storm shutters impacted by reinforcing. with lever handles for 1-3/8" (35) and
windborne debries in hurricanes. 1-3/4" (44) doors and frames.
ANSI A250.8—SDI-100 recommended specifications
for standard steel doors and frames (supersedes
Foam Core Standards— ANSI/SDI 100).
Polystyrene/ ANSI A250.13—Testing and rating of Severe Windstorm ADA Compliant
Polyisosyanurate Resistant Components for swinging door assemblies.
ASTM C553—Specification for mineral fiber blanket The Americans with Disabilities Act of
thermal insulation for commercial and industrial
Life-Safety 1990 (ADA) became effective in 1992.
applications. ANSI/NFPA 105—Installation of smoke and draft CURRIES is committed to compliance
control door assemblies. with this national mandate for
ASTM C578—Specification for preformed, block-type
cellular polystyrenethermal insulations. NFPA 252—Fire tests of door assemblies. eliminating discrimination against
ASTM C591—Specification for unfaced preformed rigid individuals with disabilities. The company’s hollow
UL 10B—Fire tests of door assemblies.
cellular polyisocyanurate thermal insulation. metal product line has the ability to meet the most
UL 10C—Positive Pressure fire tests of door assemblies. demanding requirements.
UL 63—Fire door frames.
CURRIES knock-down frames with narrow [1" (25), 1-
1/4" (32), 1-1/2" (38), 1-3/4" (44), and 2" (51)] face
dimensions allow the use of standard rough openings
in existing or new construction and still provide
“clear” opening requirements as specified by the ADA.
Special size doors and frames are produced to meet
special needs simultaneously with our standard
products.
20
Testing & Technical Information
ASSA ABLOY, the global leader
in door opening solutions
door passes 2,000,000 cycle physical endurance & & Frame Type 250,000 500,000 1,000,000 1,500,000 2,000,000 4,000,000
twist tests. 16 Gauge 707 Door
Even though the ANSI test required only a 3070 18 Gauge 707 Door
door, CURRIES tested a larger 4070 door. In spite of
16 Gauge, 5-3/4”
the increased potential for failure, the CURRIES door Jamb Depth, KD Drywall
exhibited exceptional performance. Slip-On Frame with
Compression
The CURRIES door was initially subjected to the ANSI Anchor & Standard
SDI A250.4 Level A door test of 1,000,000 operating Base Anchor
cycles and twist tested 23 times during the cycle test. 16 Gauge, 5-3/4”
Jamb Depth, KD
Masonry Frames
& Anchors
Test Results
18 Gauge 607 Door
The CURRIES door more than met test requirements.
20 Gauge 707 Door
No metal fatigue. No cracking or deformation at
hardware provision cutouts or along form contours. 16 Gauge 747 Door
No delamination. No seam separation or weld
The door test was then extended to 2,000,000 cycles criteria without any functional breakdown. Internal
breakage. No misalignment.
and 46 twist tests (double the test requirements for visual after sectioning: No failures noted. Still yielded
The door yielded less than 50% of the allowable level A doors). Even after 1,000,000 additional cycles, less than 50% of allowable deflection.
deflection during twist tests. the door passed the level A door test acceptance
Properties
I. Door/Frame Performance Fire Rating Fiberglass—ASTM C553, 0.75 lb. (.34) density
UL 10B, ANSI/NFPA 252 Test Procedures, UL 10C, flexible glass blanket insulation, R Value = 6
Cycle Test UBC 7.2-97 Temperature Rise Door Core—UL Listed Fire door
Doors 607 & 707 doors—3 hr., 1-1/2 hr., 3/4 hr., core board, 15 lb. minimum density mineral fiber
ANSI A250.4 Test Procedure 20 minute hourly ratings board (nonasbestos)
707 door, 18 gauge—2 million cycles 747—3 hr., 1-1/2 hr., 3/4 hr.,
707 door, 16 gauge—2 million cycles 20 minute hourly ratings Prime Paint
607 door, 18 gauge—2 million cycles Doors—Gray color, alkyd base, non-lifting primer,
747 door, 16 gauge—4 million cycles Hinge Screw Pull-Out Strength ANSI A250.10, salt spray 120 hours, humidity
14 gauge door hinge channel with extruded 240 hours
Frames hole—1240 lbs. per screw/5000 lbs. (2268) Frames—Gray color, epoxy non-lifting primer.
Knock-down frame with stud type anchors— per hinge. ANSI A250.10, salt spray 240 hours, humidity
1 million cycles 240 hours
Knock-down frame with compression anchors— Door Physical Performance
1 million cycles Surface Load—1440 PSF at 1/4" (6) deflection III. Industry & Government Specifications
Sag—1000 lbs. (454) at 1/8" (3) lateral deflection CURRIES steel doors and frames meet or exceed
Thermal Hinge Reinforcing Break Loose—6670 the requirements of these specifications:
ASTM C236 and SDI 113 Test Procedures lbs. (3025) to failure
707 door and frame assembly—0.24 U Factor Twist—700 lbs. (318) at 1" (25) deflection ANSI 250.8 CEGS 08110 (CE-225.02)
747 door and frame assembly—0.36 U Factor Bow—2000 lbs. (907) to failure ANSI/NFPA 80 FEMA 320 & 361
CURRIES Thermal Break Frame—0.43 U Factor SDI 117 CEGS 08300 (CE-225.03)
II. Material Performance & Specifications ANSI/NFPA 101 ASTM E1886
Sound SDI 118 DOD 4270.21 UL 10B
ASTM E90, E413, and Test Procedures Steel Federal Specification UL 752
707 door and frame assembly—STC 24* Cold-Rolled—ASTM A568, ASTM A1008 RR-D-575 UL10C
747 door and frame assembly—STC 43* Hot-Rolled—ASTM A1011 PBS: 4-0810 UL 9
757 door and frame assembly—STC 46 Galvanized—ASTM A924, A653, A-40, (supersedes 222-1A) ASCE 7
A-60 and G-90 coatings VA Masterspec section 08110
Stainless Steel—Type 304—#4 satin finish CSI-08111 (spec. section 24A)
Core CSI-08114
Polystyrene—ASTM C578 Type 1, 1.0 lb. (.45) NAVFAC (NFGS) 08110, ANSI A115 Series
nominal density expanded polystyrene, Florida Building Code Test Protocols TAS 201,
R Value = 6.4 (1-3/4" door) TAS 202, TAS203
Polyisocyanurate—ASTM C591, 1.75 lb. minimum
(.45) density rigid cellular isocyanurate foam, *Contact factory for details.
R Value = 10 (1-3/4" door)
ASTM E90
21
Hardwiring Made Easy TM
FLATLITE® is a registered trademark of E-LITE Technologies, Inc. CURRIElumTM is a trademark of CURRIES Division, ASSA ABLOY ASSA ABLOY is the global sponsor of
Door Group, LLC. Eero Saarinen: Shaping the Future.
TM
CURRIElum is a trademark of CURRIES Division, ASSA ABLOY
Door Group, LLC.