2. Install wire ways and cable tray 3. Install auxiliary terminal cabinet and distribution panel 4. Prepare for cable pulling and installation 5. Perform wiring and cabling lay out 6. Notify completion of work DEMONSTRATION CHECKLIST Yes No During the demonstration of skills, did the candidate…
Interpret correct drawing to determine job requirements
Determine correct Quantities of Conduit, fittings and accessories as per job requirement Select correct quantities of materials as per job requirements Ensure that Conduit is assembled, that fittings are fully inserted and tightened as per job requirements Bend Conduit with bends not exceeding 90° as per job requirements Install Conduit couplings and elbows as per job requirements Thread Conduit in line with job requirements
Follow Safety procedures in line with SOP’s
Select Tools and Equipment as per job requirement
Install Wire ways and cable trays as per job requirements*
Install Auxiliary terminal cabinet is as per job
requirements* Install Auxiliary main distribution frame as per job requirements* Prepare Necessary tools, equipment, materials and personal protective equipment (PPE) in line with job requirements. Identify Cable pulling & installation requirements and constraints from plan and site inspection as per job requirements* Set up Cable lay out & installation equipment in accordance with manufacturer's and job requirements* Safe and Secure Site is made for cable installation
Select Suitable protective clothing and required safety
devices are used Asses Support structure is safe for normal working conditions Identify and obtain Tools, equipment, pulling compound and safety requirements for the lay out and installation Install Pulling materials and properly tension to required specifications Install and secure Cable permanently to support structure in accordance with standard installation procedures Observe Bending radius and loops tolerance for cable materials at all times Follow Schedule of wire cutting lists based on estimates, quantity and sizes to avoid wastage Required Further instructions are sought if unplanned events or conditions occur Check quality of work in accordance with instructions and requirements Make Final checks to ensure that work conforms with instructions and job requirements Notify Supervisor upon completion of work*
Appropriately Clean, Check, and return Tools, equipment
and any surplus resources and materials are, where in accordance with established procedures Clean-up and make safe the Work area is cleaned up according to OHSA regulations Overall Performance of the Candidate: