Professional Documents
Culture Documents
* Percentage of open area is based upon 3/16" thick bearing bars and .275" cross bars. Contact Grating Pacific if exact open area calculation is required for alternative bearing bar thicknesses or cross bar sizes.
How to Specify Steel Bar Grating 4. Specify plain, serrated, or Algrip surface
1. Select type of grating 5. Specify banding or additional trim required
• “W” for welded steel grating 6. Specify finish
• “DT” for dovetail pressure locked grating • Bare steel (no finish)
• “SL” for swage locked grating • Painted (red, black, silver, other)
2. Select bar spacing from table above • Hot dip galvanized (per ASTM A-123)
3. Select bearing bar size (consult load tables on pages 6-10 • Other
considering service loads and clear spans) 7. Specify fasteners (if required) – see page 59
Tracy, CA (800) 491-7999 | Woodburn, OR (800) 942-4041 | Kent, WA (800) 243-3939 www.gratingpacific.com 5