Professional Documents
Culture Documents
SCOPE
2. DRAWING CALLOUT
“NI 1263: ISO metric screw threads tolerances shall be according to NE 06-043.”
NE 06-043
REV DATA PÁGINA
/ DATE 20 Nov 04 PAGE 1 of 1
D EUTSCHE NORM November 1999
National foreword
This standard has been prepared by ISO/TC 1.
The responsible German body involved in its preparation was the Normenausschuß Technische Grundlagen
(Fundamentals in Technology Standards Committee).
The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard
are as follows:
ISO Standard DIN Standard
ISO 68-1 DIN ISO 68-1
ISO 261 DIN ISO 261
ISO 262 DIN ISO 262
ISO 724 DIN ISO 724
ISO 965-2 DIN ISO 965-2
ISO 965-3 DIN ISO 965-3
ISO 1502 DIN ISO 1502
ISO 5408 DIN 2244
Amendments
DIN 13-14 and DIN 13-15, August 1982 editions, have been superseded by the specifications of
DIN ISO 965-1.
Previous editions
DIN 40404: 1957-11; DIN 13-32: 1960-10, 1962-10, 1964-06, 1965-07; DIN 13-14: 1952-01, 1972-03,
1982-08; DIN 13-15: 1952-01, 1972-03, 1982-08.
Continued overleaf.
ISO Standard comprises 19 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN ISO 965-1 : 1999-11
DIN Deutsches Institut für Normung e. V., Berlin. English price group 13 Sales No. 0413
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
04.00
Page 2
DIN ISO 965-1 : 1999-11
National Annex NA
Standards referred to
(and not included in Normative references)
DIN 2244 Screw threads – Terminology
DIN ISO 68-1 ISO general purpose screw threads – Basic profile – Part 1: Metric screw threads
(ISO 68-1 : 1998)
DIN ISO 261 ISO general purpose metric screw threads – General plan (ISO 261 : 1998)
DIN ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
(ISO 262 : 1998)
DIN ISO 724 ISO general purpose metric screw threads – Basic dimensions (ISO 724 : 1993)
DIN ISO 965-2 ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general
purpose bolt and nut threads – Medium quality (ISO 965-2 : 1998)
DIN ISO 965-3 ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional
screw threads (ISO 965-3 : 1998)
Page 1
ISO 965-1 : 1998
National foreword
This standard has been prepared by ISO/TC 1.
The responsible German body involved in its preparation was the Normenausschuß Technische Grundlagen
(Fundamentals in Technology Standards Committee).
The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard
are as follows:
ISO Standard DIN Standard
ISO 68-1 DIN ISO 68-1
ISO 262 DIN ISO 262
ISO 965-1 DIN ISO 965-1
ISO 5408 DIN 2244
Amendments
DIN 13-13, October 1983 edition, has been superseded by the specifications of DIN ISO 965-2 and
DIN ISO 262.
Previous editions
DIN 40404: 1957-11; DIN 13-33: 1960-11, 1962-10, 1964-06, 1965-08; DIN 13-13: 1972-05, 1972-07, 1983-10.
National Annex NA
Standards referred to
(and not included in Normative references)
DIN 2244 Screw threads – Terminology
DIN ISO 68-1 ISO general purpose screw threads – Basic profile – Part 1: Metric screw threads
(ISO 68-1 : 1998)
DIN ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
(ISO 262 : 1998)
DIN ISO 965-1 ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic
data (ISO 965-1 : 1998)
Continued overleaf.
ISO Standard comprises 6 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN ISO 965-2 : 1999-11
DIN Deutsches Institut für Normung e. V., Berlin. English price group 08 Sales No. 0408
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
04.00
Page 1
ISO 965-2 : 1998
National foreword
This standard has been prepared by ISO/TC 1.
The responsible German body involved in its preparation was the Normenausschuß Technische Grundlagen
(Fundamentals in Technology Standards Committee).
The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard
are as follows:
ISO Standard DIN Standard
ISO 68-1 DIN ISO 68-1
ISO 261 DIN ISO 261
ISO 965-1 DIN ISO 965-1
ISO 5408 DIN 2244
Amendments
DIN 13-27, December 1983 edition, has been superseded by the specifications of DIN ISO 965-3.
Previous editions
DIN 13-27: 1973-08, 1983-12.
National Annex NA
Standards referred to
(and not included in Normative references)
DIN 2244 Screw threads – Terminology
DIN ISO 68-1 ISO general purpose screw threads – Basic profile – Part 1: Metric screw threads
(ISO 68-1 : 1998)
DIN ISO 261 ISO general purpose metric screw threads – General plan (ISO 261 : 1998)
DIN ISO 965-1 ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic
data (ISO 965-1 : 1998)
Continued overleaf.
ISO Standard comprises 17 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN ISO 965-3 : 1999-11
DIN Deutsches Institut für Normung e. V., Berlin. English price group 13 Sales No. 0413
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
04.00
Page 1
ISO 965-3 : 1998