Professional Documents
Culture Documents
Specifications
Models S -100 S -105 Range Of Motion S -100
™ ™ ™
110 ft
Measurements US Metric US Metric 33.53 m
Drive speed - raised above 80 ft 0.34 mph .55 km/h 0.34 mph .55 km/h
Range Of Motion S -105
™
20 ft
Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10 6.1 m
10 ft
3.05 m
0 ft
0m
A A
-10 ft
-3.05 m
E B E B -20 ft
-6.1 m
-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft 70 ft 80 ft
D D -3.05 m 0m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 18.29 m 21.34 m 24.38
C C
*T he metric equivalent of working height adds 2 m to platform
height. U.S. adds 6 ft to platform height.
G G ** G
radeability applies to driving on slopes. See operator’s manual
F F for details regarding slope ratings.
*** W
eight will vary depending on options and/or country standards.
www.genielift.com
Self-Propelled Telescopic Booms
S -100 & S -105
™ ™
Features
Standard Features Easily Configured To Meet Your Needs Options & Accessories
Measurements Platform Options Productivity Options
S™-100 • Steel 8 ft (2.44 m) (standard) • Half-mesh platform inserts with
• 106 ft (32.48 m) working height • Steel 6 ft (1.83 m) swing gate
• 75 ft (22.86 m) horizontal reach • Steel 8 ft (2.44 m) tri-entry • Platform top auxiliary rail
• 750 lb (340 kg) lift capacity • Welder package
S™-105 Jib Options • Deluxe hostile environment kit
• 111 ft (34.00 m) working height • Non-jib (S-100 only) • Thumb rocker steer
• 80 ft (24.38 m) horizontal reach • 5 ft (1.52 m) jib boom (S-105 only) • Light package
• 500 lb (227 kg) lift capacity • Entry toe boards
Productivity Engine Options
• Pipe cradle (pair)
• Self-leveling platform • 74 hp (55 kW) Deutz turbo diesel T4f* • Panel cradle package
• 160° hydraulic platform rotation (Standard)
• Operator Protective Structure**
• Proportional joystick controls • 74 hp (55 kW) Perkins turbo diesel T4f*
• Operator Protective Alarm
• Hydraulic oil cooler • Fall Arrest Bar
Drive/Steer
• Drive enable
• AC power cord to the platform • 4WD (standard) Power Options
• Horn • 4WS (standard)
• Cold weather kit
• Hour meter Axle • Diesel scrubber/catalytic muffler
• Tilt alarm • Intake air pre-cleaner
• Extendable axles (standard)
• Descent alarm
• 360° continuous turntable rotation Tire
• Positive traction 4WD
• Rough terrain foam-filled (standard)
• Two speed wheel motors
• Four wheel high angle steer * Also available as Tier 4i in limited regions
** Available through aftermarket parts only
• Four steering modes: front, rear, crab
and coordinated
• On board full diagnostics and engine
monitoring display
• Platform work lights
• Lockable platform control box cover
• Telematics ready connector
Power
• 12 V DC auxiliary power
• Anti-restart engine protection
• Auto engine fault shutdown
• Swing out engine tray
• Welder ready 12.5 kW AC generator
Effective Date: January, 2016. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Terex, Genie and AWP are registered trademarks of Terex Corporation or its subsidiaries. © 2016 Terex Corporation.