Professional Documents
Culture Documents
Specifications
A A
E B E B
D D
C C
G G
F F
PRODUCTIVITY 0 ft
0m
Lift capacity 227 kg 500 lbs 227 kg 500 lbs
Platform rotation 160° 160° 160° 160° -5 ft
-1.52 m
Vertical jib rotation ——— ——— 135° (+78° /-57°) -5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft
Turntable rotation 360° continuous 360° continuous -1.52 m 0m 1.52 m 3.05 m 4.57 m 6.10 m 7.62 m 9.14 m 10.67 m 12.2 m
Turntable tailswing (on tyres) 86 cm 2 ft 10 in 86 cm 2 ft 10 in
Turntable tailswing (with Trax) 89 cm 2 ft 11 in 89 cm 2 ft 11 in
Drive speed - 2WD stowed (on tyres) 7.7 km/h 4.8 mph 7.7 km/h 4.8 mph RANGE OF MOTION STM-45 / STM-45 Trax
Drive speed - 4WD stowed (on tyres) 7.7 km/h 4.8 mph 7.7 km/h 4.8 mph
50 ft
Drive speed - 4WD stowed (with Trax) 4 km/h 2.5 mph 4 km/h 2.5 mph 15.24 m
Drive speed - raised or extended 1.1 km/h 0.68 mph 1.1 km/h 0.68 mph
Gradeability** stowed - 2WD 30% 30% 30% 30% 45 ft
13.72 m
Gradeability** stowed - 4WD 40% 40% 40% 40%
Turning radius - inside 2 m 6 ft 8 in 2 m 6 ft 8 in 40 ft
12.19 m
- inside with Trax 4.27 m 14 ft 4.27 m 14 ft
Turning radius - outside 4.78 m 15 ft 8 in 4.78 m 15 ft 8 in 35 ft
- outside with Trax N/A N/A N/A N/A 10.67 m
20 ft
POWER 6.10 m
Power source Ford DSG-423 4 cylinder petrol/LPG 75 hp (56 kW) 15 ft
Deutz D 2011 LO3i cylinder diesel 46 hp (34.3 kW) 4.57 m
Perkins 404D-22 4 cylinder diesel 51 hp (38 kW) 10 ft
Auxiliary power unit 12 V DC 12 V DC 12 V DC 12 V DC 3.05 m
Hydraulic tank capacity 170 L 45 gal 170 L 45 gal
5 ft
Fuel tank capacity (Diesel) 76 L 20 gal 76 L 20 gal 1.52 m
WEIGHT***
2WD (CE air tyres) 5,420 kg 11,950 lbs 6,709 kg 14,790 lbs
*T he metric equivalent of working height adds 2 m to
4WD (CE air tyres) 5,420 kg 11,950 lbs 6,709 kg 14,790 lbs platform height. U.S. adds 6 ft to platform height.
CE Foam Filled tyres add 296 kg add 652 lbs add 296 kg add 652 lbs ** G
radeability applies to driving on slopes, see Operator’s
4 WD (Track system) 6,549 kg 14.440 lbs 7,910 kg 17,440 lbs Manual for details regarding slope ratings.
*** W
eight will vary depending on options and/or country
standards.
STANDARDS COMPLIANCE CE EN280, PB-10-611-03
Effective date: February, 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s
Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable
to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex
Corporation and/or their subsidiaries in the U.S.A. and many other countries. Genie is a Registered Trademark of Terex South Dakota, Inc. © 2012 Terex Corporation.