MAN Diesel
509-10.00 =
Ezition 13H Lambda Controller ane
L23/30H
Adjustment of the Lambda Controller
All adjustments are made when the engine is in
‘standstil position.
1). Check that the free space between the pick-
Up and the band steel on the regulating arm
ismin. 1 mm, see fig 1
ch
1.Band sts!
2'Pidcup
2 Reguating ae
Fig! Check of tee space
Fig?
Adjustment of he stop sew
Figs
2)
3)
4)
| Adjustment of the Stop Screw
5)
6)
n
2
3
41, Lamba eyinder 3. Adjustment screw |
2, Piston ofthe 4, Reguatingarm
Jamada oylnder
‘Turn the lever (fig 2) of the governor a few
times jo full load with an acjustable spanner
(soring between governor and tual rack full
com-pressed). Check that the fuat index is 17
atthe fusl pump.
In case of large deviation trom index 17 ad-
justmentis done by turning the regulating arm
(4), fig 2. Finally adjsstment is done at the
adjustment screw (3), fg 3.
‘Adjustment completed,
Remove pipe for charge air pressure.
‘Supply air pressure untiithe piston 1od reaches
its upper position.
ca02e oD HE250 06 08.12
Turn the lever (fig 2) of the governor to fullload
with an adjustable spanner. Adjust the stop
screw (fig 2)to 110 9% load (stationary 100%)
according to the test bed, plus 1.5 index.
0913- €S0