The document outlines the 5 main steps to build an igloo: 1) finding hard-packed snow and cutting blocks to size, 2) placing the largest blocks in a circular structure, 3) adding more blocks while smoothing sides, 4) adding loose snow outside and shoveling excess inside, 5) shaping an entranceway and blocking it for insulation.
The document outlines the 5 main steps to build an igloo: 1) finding hard-packed snow and cutting blocks to size, 2) placing the largest blocks in a circular structure, 3) adding more blocks while smoothing sides, 4) adding loose snow outside and shoveling excess inside, 5) shaping an entranceway and blocking it for insulation.
The document outlines the 5 main steps to build an igloo: 1) finding hard-packed snow and cutting blocks to size, 2) placing the largest blocks in a circular structure, 3) adding more blocks while smoothing sides, 4) adding loose snow outside and shoveling excess inside, 5) shaping an entranceway and blocking it for insulation.
The diagrams illustrate the process of building an
igloo. The given illustration shows several stages of constructing an ice shelter. Overall, it is clear from the diagram that there are a total of 5 main steps to build the igloo, starting from choosing hard-packed snow on the surface. Observing the first stage of the picture, after finding a hard-pack snow area, the snow is then sawed into blocks with the appropriate size, 15, 8, and 3 inches in height, wide, and narrow respectively. Next, the largest ice block will be placed on top to cover the igloo. The following step is to smoothen the sides of the blocks by repeating the sawing process, and builders will put these blocks orderly in a round shape. The constructors then create a hole above the front side of the igloo to make an entrance direct to the ice house. Moving further to the next stage, the manufacturers will add a loose snow layer outside the igloo with a shovel and use snow to cover all of the block’s crevices. The inside surface of the igloo will also be smoothened manually and the remained snow will be shoved out. Finally, the main entranceway will be shaped following the desired design, and it will be covered by snow blocks to prevent the cold temperature from running into the igloo.