Professional Documents
Culture Documents
A Case Study On Retaining The Best Talents in Murugappa Group of Companies Chennai
A Case Study On Retaining The Best Talents in Murugappa Group of Companies Chennai
PROJECT REPORT
Submitted by
STUDENTS’S DECLARATION
I, ANIL KUMAR KHADKA hereby declare that the Project Work titled “ A
CASE STUDY ON RETAINING THE BEST TALENTS IN MURUGAPPA
GROUP OF COMPANIES CHENNAI” is the original work done by me and
submitted to the Pondicherry University in partial fulfillment of requirements for the
award of Master of Business Administration in Human Resource Management is a
record of original work done by me under the Supervision of
Student Date :
ACKNOWLEDGEMENT
I would like to thank the Co- ordinator, Pondicherry University and Loyola College
Twinning Programme for providing all the encouragement and valuable inputs to do the project
work by organizing seminars. I wish to convey my heartfelt thanks to
Prof. R. SELVA PARY. M.A., M.Phil., Dept. of Economics Loyola College, Ch-34, Visiting
faculty Human Resource Management, Pondicherry University- Loyola Twinning program for
giving me all the valuable guidance to improvise the project.
I would like to extend special gratitude to Mr. PARTHASARATHY, Senior HR Manager and
Mr.MURALI GIRI Senior Admin Manager IT - Projects, Murugappa Group of Companies, for
being my company guide and providing me an insight into various issues pertaining to cases
mentioned in the report. This is his sincere support and consistent guidance that led to the
completion of the project. Finally it is my foremost duty to express my gratitude to my parents,
sister and friends for their moral support and encouragement without which would have not be a
complete one.
One of the main areas of the project is the analysis part, where the data are analyzed &
interpreted, to find out how the inventories were managed. Some of the tools used in inventory
are regarding to:
TABLE OF CONTENTS
CHAPTER NO TITLE PAGE NO
INTRODUCTION 2
2 COMPANY PROFILE 11
3 REVIEW OF LITERATURE 37
5 FINDINGS, SUGGESTION,CONCLUSIONS 74
BIBLIOGRAPHY 82
QUESTIONNAIRE 84
LIST OF TABLES
TABLE
NO TOPICS PAGE NO
4.1 GENDER 44
4.2 AGE 45
4.3 DESIGNATION 46
4.5 EXPERIENCE 48
4.7 INCOME 50
4.8 RECRUITMENTS 51
4.15 COMMUNICATION 58
4.16 RESPONSIBILTY 59
LIST OF FIGURES
4.2 AGE 45
4.3 DESIGNATION 46
4.5 EXPERIENCE 48
4.7 INCOME 50
4.8 RECRUITMENTS 51
4.15 COMMUNICATION 58
4.16 RESPONSIBILTY 59
Introduction
Human Resource Development is concerned with people, dimensions of the organization. The
organization objectives can be best achieved by acquiring human resources, develop them, cast
them for our need &motivate them for still better performance and ensure that they continue to
Maintain their involvement, commitment, loyalty to the organizational. The Human Resource
Development basically consists of three “C”s i.e. competencies, commitment and culture
Research done on the value of such systems implemented within companies consistently
uncovers benefits in these critical economic areas: revenue, customer satisfaction, quality,
productivity, cost, cycle time, and market capitalization. . The term Retention Management
means different things to different organizations. To some it is about the management of high-
worth individuals or "the talented" whilst to others it is about how talent is managed generally -
i.e. on the assumption that all people have talent which should be identified and liberated.
From a Retention Management standpoint, employee evaluations concern two major areas of
measurement: performance and potential. Current employee performance within a specific job
has always been a standard evaluation measurement tool of the profitability of an employee.
Retention refers to the ability of an organization to retain its employees. Employee retention can
be represented by a simple statistic for example; a retention rate of 80% usually indicates that an
organization kept 80% of its employees in a given period. However, many consider employee
retention as relating to the efforts by which employers attempt to retain employees in their
workforce. In this sense, retention becomes the "Strategies" rather than the outcome.
A distinction should be drawn between low performing employees and top performers, and
efforts to retain employees should be targeted at valuable, contributing employees. Employee
turnover is a symptom of a deeper issue that has not been resolved. These deeper issues may
include low employee morale, absence of a clear career path, and lack of recognition, poor
employee-manager relationships or many other issues. A lack of satisfaction and commitment to
the organization can also cause an employee to withdraw and begin looking for other
opportunities. Pay does not always play as large a role in inducing turnover as is typically
believed.
In a business setting, the goal of employers is usually to decrease employee turnover, thereby
decreasing training costs, recruitment costs and loss of talent and organisational knowledge. By
implementing lessons learned from key organizational behavior concepts employers can improve
retention rates and decrease the associated costs of high turnover. However, this isn't always the
case. Employers can seek "positive turnover" whereby they aim to maintain only those
employees who they consider to be high performers.
1.1 Objectives:-
In the current scenario of cutthroat competition, every company has to survive to satisfy its
customers by providing them quality products and services. The Following objectives emerged:
Primary Objective:
To suggest and come out with various ways & means of retaining the top talents in the
organization.
Secondary Objective:
To map the entire process of Retention procedure and policies involved in the said
organization.
To study the accuracy and quality of work of employees by Retention Management
procedure.
To suggest possible improvement in Retention Management process.
The purpose of this study is to analyzed the retaining the best talents in Companies. The study
aims is to improve Operational Efficiency and Productivity of the Manufacturing Company and
its aims is to enabling Business Agility. It aims is to simplify and transform the company to adopt
talent management practices to retain the best employees in the company.
After putting the more efforts, time and Cost to hire the best employee for the Right
person for Right job. Many books have been written and exit interviews conducted as employers
look for the secret to keeping their good employees satisfied.
Salary, retirement plans and vacation benefits are high on the list of why those great
employees took the job, but they are not reasons enough to keep them in your employ for the
long haul. Job satisfaction will increase your employee retention rate.
1. Create the work atmosphere that makes your employees feel that they are the asset of
the company:
Don’t make them feel like overhead. Allow them to feel secure in their job. Greet them
by name, letting them know that you know who they are and what their contributions are to the
company. Get their input about rules or changes that may need to be made. Encourage goal-
setting and let them make their own choices as often as possible.
Today the war for talent is as big as for the Market share. Because of Liberalization and
Globalization the standard of the workforce and expectations of the employees from the
organization has moved away from aspiring for a job to seeking a career. In this scenario,
companies look for greater talents so as the candidates look for branded companies to pursue
their career. Now it becomes unavoidable for companies to attract the top talents and to retain
them to have a successful market share.
It is descriptive type of research. Descriptive Research survey and fact finding inquiries of
different kind. The major purpose of descriptive research is descriptive the state of affairs, as it
exist at present. The main control over the variable; he can only report what has to discover the
even when there he cannot the variable. The methods has to researcher utilized in descriptive
research are survey methods of all kind.
Data Source:-
The source of project depends on accurate data. That’s why data collecting the appropriate data,
which differ considerable in context money, cost, time and other resources at the disposal
researcher.
Primary data are those that are obtain by the user for fulfillment their purpose. It has Primary
Data through personal visit of HR head, and HR executive. At all levels and observation methods
to get more reliable information. It also collected primary data to be filled, ‘Yes’ or ‘No’ format
questionnaire frame by the employee of Company, This data helped us to justify the statements.
Secondary Data Collection Method.
The Secondary Data is that which is already collected and stored or we can say already saved or
ready data by others. I got secondary data from their journals, records, specimen of appraisal
form etc. And from newspapers magazines, articles, internet etc I got basic information of Talent
Management. I collect secondary data by referring some specimen of company and by referring
some books and web sites of company from internet.
1.6 Hypothesis
Hypotheses are the essential assumptions which the researcher formulates about the possible
causes, findings and ultimate output of the issue in under research. Under hypotheses mere
assumptions or suppositions are made which are to be proved or disproved. For researcher it is a
formal question that he intends to resolve. A hypotheses consist either of a suggested explanation
for a phenomenon or of a reasoned proposal suggesting a possible correlation between multiple
phenomenon. The assumptions be true or false are to be proved through the completion of
project.
Null Hypothesis
1. Employee taking benefits from Retention Management System
2. Employee can retain successfully for the benefit of organization
3. Employee’s performance increased by Retention Management
4. Employee turnover of organization affected by Retention Management Procedure
Alternate Hypothesis
1. Employees are not able to take benefits from Retention Management System
2. Employee cannot retain successfully for the benefit of organization
3. Employee’s performance cannot increase by Retention Management.
4. Retention Management is not affecting on employee turnover of organization
Chapter 2: Company Profile
Founded in 1900, Murugappa Group is one of India's leading business conglomerates. The
Group has 28 businesses including eight listed Companies actively traded in NSE & BSE.
Headquartered in Chennai, the major Companies of the Group include Carborundum Universal
Ltd., Cholamandalam Investment and Finance Company Ltd., Cholamandalam MS General
Insurance Company Ltd., Coromandel International Ltd., Coromandel Engineering Company
Ltd., E.I.D. Parry (India) Ltd., Parry Agro Industries Ltd., Tube Investments of India Ltd., and
Wendt (India) Ltd.
Market leaders in served segments including Abrasives, Auto Components, Cycles, Sugar, Farm
Inputs, Fertilizers, Plantations, Bio-products and Nutraceuticals, the Group has forged strong
alliances with leading international companies like Groupe Chimique Tunisien, Foskor, Cargill,
Mitsui Sumitomo, Morgan Crucible and Sociedad Qu mica y Minera de Chile (SQM). The
Group has a wide geographical presence spanning 13 states in India and 5 continents.
Renowned brands like BSA, Hercules, Ballmaster, Ajax, Parry’s, Chola, Gromor and Paramfos
are from the Murugappa stable. The organization fosters an environment of professionalism
and has a workforce of over 32,000 employees.
Headquartered in Chennai, the INR 225 Billion Murugappa Group is one of India's leading
business conglomerates. The Group has 28 businesses including eleven listed Companies traded
in NSE & BSE. Headquartered in Chennai.
Major Companies
1. Carborundum Universal Ltd.,
2. Cholamandalam Investment and Finance Company Ltd.,
3. Cholamandalam MS General Insurance Company Ltd.,
4. Coromandel International Ltd.,
5. Coromandel Engineering Company Ltd.,
6. E.I.D. Parry (India) Ltd.,
7. Parry Agro Industries Ltd.,
8. Sabero Organics
Ltd., 9.Shanthi Gears
Ltd.,
10.Tube Investments of India Ltd.
Market leaders in served segments including Abrasives, Auto Components, Cycles, Sugar, Farm
Inputs, Fertilizers, Plantations, Bio-products and Nutraceuticals, the Group has forged strong
alliances with leading international companies like Groupe Chimique Tunisien, Foskor, Mitsui
Sumitomo, Morgan Crucible and Sociedad Química y Minera de Chile (SQM). The Group has a
wide geographical presence spanning 13 states in India and 5 continents. Renowned brands like
BSA, Hercules, Ballmaster, Ajax, Parry’s, Gromor and Paramfos are from the Murugappa stable.
The organization fosters an environment of professionalism and has a workforce of over 32,000
employees.
Coromandel International Limited, India’s second largest Phosphatic fertiliser player, is in the
business segments of Fertilisers, Specialty Nutrients, Crop Protection and Retail. The Company
manufactures a wide range of fertilisers and markets around 2.9 million tons making it a leader
in its addressable markets. In its endeavor to be a complete plant nutrition solutions Company,
Coromandel has also introduced a range of Specialty Nutrient products including Organic
Fertilisers. The Crop Protection business produces insecticides, fungicides and herbicides and
markets these products in India and across the globe. Coromandel is the second largest
manufacturer of Malathion and only the second manufacturer of Phenthoate. Coromandel has
also ventured into the retail business setting up more than 640 rural retail centers in the States of
Andhra Pradesh and Karnataka.
The Company has strategic partnerships with leading companies across the globe.
The Company clocked a turnover of 8,560 Crore during FY 2012-13. lt was ranked among
the top 20 best companies to work for by Business Today and was also voted as one of the ten
greenest companies in India by TERI, reflecting its commitment to the environment and
society. Coromandel is a part of the INR 225 Billion Murugappa Group.
E.I.D. Parry has been synonymous with dynamism since 1788. It became a part of the
Murugappa Group in 1981 and its businesses now cover a wide range of products including
sugar, microalgal health supplements from Parry Nutraceuticals and bio products from Bio
Products Division.
E.I.D. Parry pioneered integrated sugar complexes that maximise the utility of sugarcane through
the production of sugar and using its other components in more purposeful ways. The company
also converts bagasse into electricity in its cogeneration units and processes molasses into
various types of alcohol, thus completing the value chain. In addition, EID Parry has a stand-
alone distillery in Sivaganga in Tamil Nadu.
The cogeneration plants at these three locations are among the first in the country to use air
cooled instead of water cooled condensers to conserve water. The Pettavaithalai plant uses
submerged ultra filtration with two reverse osmosis systems to save water and minimise usage of
chemicals - the first of its kind in India for boiler feed water. The Pudukottai plant is amongst the
first in South India to earn carbon credits and to be registered in UNFCCC under the Kyoto
protocol for climate change.
However, the biggest innovation spearheaded by E.I.D. Parry has nothing to do with
manufacturing or marketing of sugar but with the difference it has made to the 1, 00,000
sugarcane farmers associated with it. Parry has introduced complete IT enabled services for
farmers such as Remote Sensing, Geographic Information System and Global Positioning
System for mapping and monitoring sugarcane growing area. Village-wise soil nutrient analysis,
detailed farm boundary mapping, integration with Cane Management System and soil maps
ensure efficient cane management.
E.I.D. Parry has introduced Namadhu Parry Maiyam, a concept where a local entrepreneur
(usually a sugarcane farmer) is trained to become a Namadhu Parry Maiyam operator. The
company extends interest free loans to these operators for buying high end farm equipment,
which can then be hired out to small farmers who are unable to afford such sophisticated
equipment. This helps mechanise farm services, accelerate sugarcane harvesting and save costs
as manual labour is becoming increasingly expensive.
E.I.D. Parry pioneered sugarcane research and probably runs the only private R&D centre for
sugarcane and tissue culture to develop new and improved cane varieties. It has also been
aggressively promoting eco-friendly pest management systems.
Today, E.I.D. Parry is one of the Top 5 sugar producers in India and is on the path to sweetening
more lives around the world.
Parry Agro Industries Limited
Parry Agro has tea plantation factories both in South and North-East India and between the two
regions; the Company produces around 17 million kilograms of tea.
A pioneer in organic plantations, Parry Agro’s Iyerpadi Estate has been certified organic by
IMO, JAS (Organic Laws of Japan), NOP (Organic Laws of USA) and NPOP (Organic Laws of
India). The Iyerpadi factory is also ISO 22000 and is FLO (Fairtrade Labelling Organisation)
Certified.
Three of Parry Agro’s tea factories namely Mayura, Attikunna and Carolyn are certified for ISO
9001:2000. Mayura, one of the first CTC Tea factories thus certified, is also one of the first to
have micro-processor based control and monitoring systems, reflecting the forward looking
approach of the Management.
Not content with just the cultivation of tea, Parry Agro has been conducting extensive research
on better cropping as well as processing aspects of tea at its NABL certified R&D facility for
nearly a decade. It has also pioneered research on reversal of soil degradation using earthworms.
Parry Agro, in collaboration with Sambalpur University, Orissa and Institut de Recheche pour le
Development (IRD), has developed Earthworm FBO Technology called Fertilisation Bio
Organique (FBO) Technology to improve the soil fertility of plantation crops. This technology is
patented by IRD in France, China and Sri Lanka.
Carborundum Universal Limited
CUMI pioneered the manufacture of coated and bonded abrasives in India, besides super
refractories, electro minerals, industrial ceramics and ceramic fibres. In sync with the global
vision, CUMI is expanding its product spread. The Company makes over 20,000 varieties of
products manufactured at 25 locations across India, Russia, South Africa, Australia, China,
Thailand and Canada. CUMI exports its products to 43 countries spread across the globe. All the
manufacturing facilities of CUMI are ISO 9001:2008 and ISO 14001: 2004 certified for quality
standards and environment-friendly manufacturing practices.
State-of-the-art facilities and strategic alliances with global partners have earned CUMI a
reputation for quality and innovation. It is one of the few manufacturers of abrasives and
ceramics in the world with fully integrated operations that include mining, fusioning, power
generation and manufacturing, besides marketing and distribution.
CUMI is equipped with a state-of-the-art Research and Development centre that works
aggressively on product development and efficiency enhancement. Its in-house R&D and
collaborative research with leading research institutions have ensured market leadership in India
and abroad. CUMI has manufacturing practices like Lean and Six Sigma in place to improve its
cost competitiveness.
The Company has a commanding list of subsidiaries across the globe that include Volzhsky
Abrasive Works-Russia, CUMI Australia Pty Ltd, Foskor Zirconia Pty Ltd-South Africa, CUMI
Middle East-RAK, CUMI Canada Inc, CUMI America Inc, Sterling Abrasives Limited-
Ahmedabad, Net Access India Limited, Southern Energy Development Corporation Limited
(SEDCO), CUMI Abrasives and Ceramics China Limited (CACCL), Cellaris Refractories India
Limited and CUMI International Limited, Cyprus. CUMI's joint ventures include Wendt (India)
Limited – manufacturing super abrasives, Murugappa Morgan Thermal Ceramics -
manufacturers of ceramic fibre and Ciria India Limited - specialising in design and installation of
refractory liners for petrochemical and fertiliser industries. This unique strength allows the
Company to serve diverse markets and geographies leveraging the local strength of its partners.
TII Heritage
the Group traces its origins to 1898, when Dewan Bahadur an M Murugappa Chettiar went as an
apprentice to Burma (now Myanmar). Quick to learn financial skills and Burmese, he realized he
was destined to greater achievements; he founded a firm in Moulmein, a large port-city in Lower
Burma. This grew into a prosperous family-owned business, with interests in Banking, Rubber
and Trade, covering Malaya (Malaysia), Ceylon (Sri Lanka), Indonesia and Vietnam. The
outbreak of the World War II and subsequent political upheavals in the region cut short the
firm’s growth. While a good portion of its hard earned fortunes were lost, the family had the
foresight to move significant assets to India; this financial prudence ensured that the business
would rebound after the disaster and rebound it.
Back home in India, the Group had engaged in businesses like Rubber, Steel cabinets, Yarn and
other traded goods. But the real major industrial opportunity came soon after Independence.
Political Independence spawned Economic Independence: and AMM Murugappa Chettiar,
Dewan Bahadur’s eldest son (and by then, head of the family) was quick to realize it. His vision
was to start a business that would manufacture a product for the common man which they could
sell in large numbers. Thus, in 1949, TI Cycles of India (TICI) was born in collaboration with TI
of UK. It was the Group’s first of many successful Joint Ventures and also its first foray into
large scale manufacturing. Later, as a measure of backward integration two more companies
were formed: Tube Products of India (TPI) in 1955, to make steel tubes for bicycle frames and
TI Diamond Chain (TIDC) in 1960 to make bicycle chains. Over a period of time these two
businesses have moved up the value chain from bicycle parts to higher technology products.
In 1959, Tube Investments of India (TII) was formed by merging TI Cycles of India and Tube
Products of India. TI Diamond Chain was merged with the parent company, in 2004. In 1962, the
company saw a potential to leverage its engineering skills to address the market for roll formed
metal products. So a new unit called TI Metal Forming was created to realize this potential; to
this day it is recognized as the pioneer in this business.
During the 1990s TII made many bold acquisitions to enhance its presence in its core
businesses. The most notable, was the case of Satavahana chains, a sick BIFR company that was
turned round to a highly profitable unit. Other success stories were the acquisition of a Japanese
Tube plant and a German Chains plant which were re-erected in Chennai to address the growing
export markets. A successful GDR issue in 1994 increased its financial muscle and accelerated
both acquisitions and expansions. Capacities were increased in all its units to meet the growing
customer demands. In the six decades of its existence, TII has built significant skills in
engineering and metallurgy, which is fully supported by a central R&D function.
A Total Quality Management approach has ensured a satisfied community of customers and
TII is the preferred supplier in all the markets it operates. TII continues the tradition of financial
discipline and prudence set by the founding fathers. It is this tradition that has earned TII the
unique distinction of uninterrupted dividend distribution since 1954.
Management Tress
BOARD OF DIRECTORS
Service Department Body & Paint Dept Spares Department HR, Accounts &
Work Manager True Value Dept.
Deputy woks Manager (Floor Incharge)
Manager Manager
Manager
Supervisors Sr. Executive
Sr. Executives
Service Coordinator Supporting Section
Asst. Supervisor Officiers
Executive
Supervisor Customer care, Front Officiers
Office, Lobby Hostess, Technicians Asst.Officiers
Service Mktg)
Asst. Service Advisors
Senoir Executives Asst.Officiers
Technicians
Service Advisors
Executives Technicians
Technicians
Officers
Asst Officiers
Technicians
TII journey towards excellence began with introduction of basic TQM which focuses on
Customer, Continuous improvement, Employee involvement, Employee empowerment, and
building a learning organization.
The outcomes of the above initiatives were development of documented management systems
for Quality, SHE (Safety Health and Environment), TEI (Total Employee Involvement), and
related metrics of measures including that for customer satisfaction and Employee satisfaction /
Engagement.
Development of vision, mission, strategic plans, Process focus and integration of all the earlier /
above initiatives in a robust manner was supported by the introduction of the EFQM Model for
Business Excellence. Similarly concept of OEE, autonomous maintenance and related matrices
of measures for success are from the TPM introduction.
Though they were benefited from many of these initiatives and moved closer to the bench mark
levels, the drive needs to continue. As an engineering company, they believe that the need now is
to focus and excel in Manufacturing / Operations without losing any of the gains we had from
the previous initiatives.
Strengthening the organisational structure and aligning them appropriately including formation
of a new function for Manufacturing Engineering Technology (MET) are the new initiatives in
this direction. To create more focus for this drive, we have developed a Model for Operational
Excellence, and launched the same during Sept 2012.
In this House of Excellence, the two pillars represent our commitment to delight customers by
meeting and exceeding their expectations in terms of Quality, Delivery and other services, and
our intent to partner suppliers / Vendors in this process. The base steps show our approach to
create shop floor excellence leading to LEAN Manufacturing.
TI Cycles of India
A pioneer in the Cycles market, TI Cycles, formed in 1949, has constantly come up with new trends in
line with evolving consumer needs. TI Cycles’ vision is “To be the most preferred brand in fitness,
recreation & personal mobility solutions”. It strives to give its customers not only a bicycle but a lifetime
experience.
BSA stands for style, fun and comfort. There are several models catering to consumer segments
ranging from kids, ladies and other premium end customers. BSA Ladybird, BSA SLR, BSA
Champ, BSA Mach are trendsetters and icons in their respective categories. It signifies the joy of
cycling. Excitement and comfort go hand in hand with BSA. Today, BSA is an intrinsic part of
the Indian family.
Source: www.bsahercules.com
our first brand is still as young as ever, signifying strength and passion. It is rugged, robust and is
for the rough and tough. Hercules stands for a unique pride of possession. The range of Hercules
Roadeo and Hercules MTB Turbodrive has been pioneers in the bicycles category catering to the
youth. The range of Hercules Ryders is for urban adults for them to ride towards a healthier,
happier self. The Hercules Popular brand of "standard" bicycle is a market leader in the segment.
Source: www.facebook.com/HerculesRoadeo
Track and Trail is the ultimate destination for everything in cycles - from the best of international
bicycles and world-class accessories to a network of people with expertise on technology,
performance and the intricacies of cycling. For mountain, road and hybrid bikes, you can choose
from Cannondale, Bianchi or Schwinn – world-class brands known for incomparable designs,
superior comfort and ease of riding. We also have an exciting range of BMX and MTB cycles
from GT and Mongoose for those who like a bit of adventure in their lives.
Source: www.trackandtrail.in
Faster, lighter and stronger than any cycle ever created in India, Montra brings international
standard carbon frame bike for the first time in India. It is designed and manufactured
ingeniously and is a part of the flagship range of TI cycles under Track and Trail. Montra,
meaning “My Track” is the bike that lets you ride our aspirations, that lets you choose your own
path.
Source: www.montra.in
BSA Motors is the youngest division of TII which made their venture into the Electric
scooters segment in 2008. It provides the Indian customers convenient personal mobility
options which are cost effective and environmentally responsible.
BSA Motors has the widest product range in the electric scooter industry specially designed and
developed to suit customer needs of the target segments like school / college girls & boys and
working women. The models ranges from 250 Watts and lower end models do not require license
or registration. The BSA Motors plant at Ambattur has the best R&D testing facilities for
electric two wheelers in India. With its focus on customer understanding,
Technology, product development, quality systems and after sales service capabilities, BSA
Motors intends to provide superior experience to its customers.Tube Products of India Ltd was
established in 1955, in collaboration with Tube Products (Old Bury) Limited-UK, as a measure
of backward integration with the bicycles plant. In 1959, Tube Investments of India (TII) was
formed by merging TI Cycles of India and Tube Products of India.
Today, TPI is the preferred supplier of precision tubes, Electric Resistance Welded (ERW) and
Cold Drawn Welded (CDW), to major automotive companies in India and abroad. TPI is India's
undisputed market leader in CDW tubes to the automotive industry. It has also significant market
presence in power plants, boiler, textile machinery, general engineering. It is the Market leader in
Telescopic Front Fork Inner tubes and Cylinder bore tubes for shock absorber and gas spring
applications, Propeller shaft tubes for Automotive segment. Other Specialty products include
Rear Axle Tubes, Side Impact Beams, and Tie Rods, Drag links, Heavy thick steering shafts and
Hydraulic Cylinder tubes.
The International Business Division (IBD) was formed to focus on international markets, gearing
TPI to compete with global tube manufacturers. The most recent addition to TPI is the Tubular
Components Division (TCD), which manufactures high strength tubular auto components,
providing the advantage of weight reduction, higher component efficiency and cost reduction.
TPI produces a wide range of CRCA strips including special extra deep drawing, high tensile,
medium carbon, high carbon finding application in industries such as Bearings, Automobile,
Auto Ancillaries, white goods, fine blanking and General Engineering.
TPI has been supplying to customers such as Bajaj Auto Ancillaries, TVS Motors Ancillaries,
Hero Honda Ancillaries, Tata Motors, Toyota India, Delphi, Gabriel, Escorts, and Endurance. Its
success stems from market driven, customer oriented approach coupled with superior process
design, short product development cycle, delivering high quality products and efficient customer
service ensuring total customer satisfaction.TPI has integrated manufacturing facilities at
Chennai (Two tubes plants and one strips plant at Avadi and one at Ambattur), Shirwal &
Mohali.These plants conform to international standards and achieve operational excellence
through TPM. TPI has distribution centers across India, which ensures timely service to the
customer’s daily requirements.
TPI has received ISO-TS 16949 for all plants, ISO 9001: 2000 for all plants, ISO 14001:2004 for
Avadi & IBD Plants, Self-certification for boiler tubes by the central boiler board. TPI is the
Winner of the Sword of honor for outstanding safety performance from the British Safety
council. Tubular Components Division (TCD), a plant of TPI, has won Supplier Performance
Award 2007-2008. Timely delivery, top notch quality and excellent service have been key for the
division for winning this award.
Tube Investment Diamond:
TIDC applies a collaborative approach with customers in developing new products that provide
value to customers. For this, TIDC relies on extensive in-house R&D and advanced design
software. In the domestic market the 'Diamond' brand chains cater to a range of two wheelers and
industrial OEMs. TIDC also services the after-market with kits and chains through a well-
established distribution network and warehouses in India and abroad. TIDC has plants at
Chennai, Hyderabad and Uttaranchal. I Cycles was established by the Murugappa Group in the
year 1949, in collaboration with Tube Investments of India ltd, UK. The first Hercules bicycle
rolled out in 1951.Today, TI Cycles is the leader in the ‘specials’ segment. The energy of the
company can be felt nationwide, thanks to a network of around 1,500 primary dealers and 10,000
secondary dealers.
TI Cycles has the capacity to manufacture 4 million cycles a year at 3 plants across India -
Chennai in the South, Nasik in the West and Noida in the North. This is supported by 4 zonal
offices and 4 warehouses across the country. I Cycles offer consumers a range of bicycles, e-
scooters, fitness equipment and infant mobility solutions
Cholamandalam MS General Insurance Company Ltd. is a Joint Venture between the USD 3.03
billion Murugappa Group, one of India’s leading business conglomerates and Mitsui Sumitomo
Insurance Company Limited, which is part of the Mitsui Sumitomo Insurance Group of Japan,
the largest General Insurance Company in Japan and 5th largest insurance group globally.
Chola MS offers a wide range of products that include Accident, Engineering, Health, Liability
and Marine, Motor, Property, Travel and Rural insurance for individuals, SME’s and the
corporate sector.
The company has achieved Rs. 785 crores Gross Written Premium (GWP) mark for 2009-10.
Having posted a remarkable growth of 15% year-on-year, the company has been one of the
fastest growing General Insurance companies for the previous many quarters. The company has a
network of 108 branches across the country. The company offer well-integrated operational
capabilities to ensure the smooth performance of delivery like strong underwriting, tie-ups with
global reinsurers, fast-track claims settlement and cash-free settlement for Health Insurance.
With exposure to various industry sectors and services, Chola MS is fully equipped to provide
world class customer service such as centralized policy issuance, renewal management through
CRM Cell. A toll free helpline number accessible 24 X 7 and a completely interactive and user-
friendly website which makes Chola accessible from anywhere in the world.
Sedis
Sedis is a leading manufacturer of Industrial and Engineering Class Chains in France and
possesses a product range covering the requirements of a whole range of industries including the
high growth infrastructure sector.
The brand “Sedis” has strong brand equity and the client list includes names such as:-
Lafarge, Charles De Gaulle airport, BAA Heathrow, Metro net, Cairo Metro, Kone, Otis,
Schindler etc. Sedis has a presence in almost 100 countries through its vast distribution and sales
network. It has two plants in France and a marketing company in the United Kingdom. This
Group is a subsidiary of TI, which holds 77.13%. Sedis possesses superior technology for
manufacture of special and engineering class chains.
Fertilisers Pesticides
Plantations Sugar and Bio-Products
Nutraceuticals
Tube - Automobile
Bearings Stampings Auto & Auto Ancillaries
Tube - Boiler
1. Self Certification for Boiler tubes
2. Well Known Tube Maker Certification
3. Direct for "U" Bend usage
Bicycles Tube - General
Metal forms
Tube Process
Chapter 3: Review of Literature
Traditional HR: Systems approach people development from the perspective of developing
competencies in the organization. This can actually be a risk-prone approach, especially for
companies operating in fast evolving industries, since competencies become redundant with time
and new competencies need to be developed. Thus, over time, the entire approach to
development of people might be rendered obsolete calling for rethinking the entire development
initiative.
Retention Management: on the other hand focuses on enhancing the potential of people by
developing capacities. Capacities are the basic DNA of an organization and also of individual
potential.
D Point of Departure
N
Navigation
A
Point of Arrival
The idea of developing talent is not a new concept in any business. In fact every successful
company that has 'stood the test of time' has done so, because of their ability to attract, retain and
get the best out of their talent.
This has emerged, not because companies have forgotten about talent, or allowed it drop off of
the radar but, because in some fundamental ways, the talent has changed. We have a new kind of
young person entering the business world, with a very different world view, set of values,
priorities and goals.
By examining this through the perspectives of the different generations, we are able to look at
their attitudes to work:
what kind of career, organization and benefits they are looking for
What kind of techniques will ensure that your recruitment process is successful in each
generational context?
Attitudes to work
Career goals
Techniques to attract the different generations: what will make your organization
stand out?
Techniques to recruit the different generations: how should the job offer be presented?
Career planning
Ways of motivating
In depths look:
How the generations internalize authority will enable us to adjust our management style
to fit in with what they are.
We are able to look at the attitudes of the different generations to the leadership and
management;
What kind of management approaches will ensure that you gain maximum
loyalty, productivity and job satisfaction from each of your employees?
Analysis and Interpretation are done according to department wise and according to questionnaire. This
analysis and Interpretation will definitely help to the company for the future strategies. Following are the
analysis and Interpretation of the results.
These all analysis is imagining for general company. It is very necessary to understand the psychological
tendency of employee. Because it is a quietly subjective so it will slightly deviate the opinion of the
employee.
The researched has done his study in the following departments envisaged below. There are 100
employees in each department. Total employees are 500.
Supply chain and logistics support
Production/Operations
Packing and dispatch
Research and Development
Finance/Accounts
Retention Questionnaires:
TABLE 1: SHOWING GENDER
80
70
60
50
40
30 Male Female
20
10
0
Inference
From the above table it is inferred that 78% of the respondents are male, 22% of the respondents
Female.
60
50
40
30
20
10
Inference
From the above table it is inferred that 23% of the respondents are 20-30 aged persons,
56% of the respondents are 31-40 aged persons, 15% of the respondents are 41-50 aged persons
and 6% of the respondents are above 50 aged persons.
60
50
40
30
20
10
Inference
From the above table it is inferred that 48% of the respondents are junior executive, 21% of the
respondents are Operator, and 31% of the respondents are Manager.
70
60
50
40
30
20
10
0
Inference
From the above table it is inferred that 60% of the respondents are UG, 20% of the respondents
are PG, 10% of the respondents are diploma, and 10% of the respondents are HSC.
60
50
40
30
20
10
0
Below 5Yrs 6-10 yrs 11-15 yrs 16-20yrs
Inference
From the above table it is inferred that 55% of the respondents are below 5yrs, 15% of
the respondents are 6-10yrs, 10% of the respondents are 11-15yrs, 15% of the respondents are
16-20yrs and 5% of the respondents are above 20yrs.
Chart Title
120
100
100
80 Number of
Respondents
60 Total
56
40 44
20
0
Mar ied Single TOTAL
Inference
From the above table it is inferred that 44% of the respondents Married and 56% of the
respondents are Unmarried.
60
50
40
30
20
10
0
Inference: From the above table it is inferred that 54% of the respondents are below 10000, 15%
of the respondents are 10000-20000, 16% of the respondents are 20000-30000, and 15% of the
respondents are above 30000.
Consultancy 15 15
Direct Recruitment 16 16
Reference 15 15
60
50
40
30
20
10
0
Inference: From the above table it is inferred that 54% of the respondents are Campus
Recruitment, 15% of the respondents are Consultancy, 16% of the respondents are Direct
Recruitment, and 15% of the respondents are Reference.
Yes
No
Inference
From the above table it is inferred that 94% of the respondents are Yes, and 39% of the
respondents are No.
TABLE 10: SHOWING THE DIRECT BENEFITS
Inference: From the above table it is inferred that 28% of the respondents are Leave
Encashment, 12% of the respondents are Holiday pay benefits, 25% of the respondents are
Vocation pay benefits, 13% of the respondents are Worker’s compensation benefits and 22% of
the respondents are Life Insurance benefits.
TABLE 11: SHOWING THE INDIRECT BENEFITS
Holiday homes 12 12
Hospitalization 24 24
Workplace Flexibility 16 16
48 48
24 24 16 16
12 12
Inference
From the above table it is inferred that 48% of the respondents are Flexible timings, 12% of the
respondents are Holiday homes, 24% of the respondents are Hospitalization, and 16% of the
respondents are Overtime.
No 32 32
70
60
50
Yes No
40
30
20
10
Inference
From the above table it is inferred that 68% of the respondents are Yes, and 32% of the
respondents are No.
Agree 11 11
Neutral 41 41
Disagree 4 4
Strongly disagree 2 2
45
40
3S5trongly Agree
30 AgreeNeutralDisagree
25
20
1S5trongly disagree
10
5
0
Inference
From the above table it is inferred that 42% of the respondents are strongly agree, 11% of
the respondents are Agree, 41% of the respondents are Neutral,4% of the respondents are
disagree and 2% of the respondents are strongly disagree.
Inference
From the above table it is inferred that 79% of the respondents are Yes, and 21% of the
respondents are No.
Needs improvement 23 23
Not bad 13 13
70
60
50
40
30
20
10
0
Inference
From the above table it is inferred that 64% of the respondents are good, 23% of the respondents
are Needs improvement and 13% of the respondents are not bad.
Agree 21 21
Neutral 40 40
Disagree 5 5
Strongly disagree 3 3
TOTAL 100 100
40
35
30
25 Strongly agree Agree NeutralDisagree
20
15
10
5
0
Strongly disagree
Inference : From the above table it is inferred that 31% of the respondents are strongly agree,
21% of the respondents are Agree, 40% of the respondents are Neutral,5% of the respondents are
disagree and 3% of the respondents are strongly disagree.
TABLE 17: SHOWING THE TALENT OF EMPLOYEE AFTER JOINED IN TO THE
COMPANY
Particulars Number of Respondents Total
Good 41 41
Excellent 30 30
No improvement 25 25
Bad 4 4
Chart Title
100
80
60
40
20
0
Good Excellent No improvement Bad TOTAL
Inference:
From the above table it is inferred that 41% of the respondents are good, 30% of the respondents
are Excellent and 25% of the respondents are No improvement and 4% of the respondents are
bad.
Good 46 46
Need Improvement 54 54
Chart Title
120
100
80 Number of
Respondents
60 Total
40
20
0
Good Need Improvement Total
Inference
From the above table it is inferred that 46% of the respondents are good, 54% of the respondents
are Needs improvement.
Good 38 38
Indifferent 24 24
Needs Improvement 20 20
120
100
80
60
40
Number of
20 Respondents
0 Total
Inference
From the above table it is inferred that 38% of the respondents are good, 24% of the respondents
are indifferent, 20% of the respondents are Needs improvement, and 18% of the respondents are
needs a lot improvement.
Salary 18 18
Designation 20 20
Benefits 12 12
Psychological need 28 28
satisfaction
Training Given 10 10
Employer relation 12 12
100
80
60
Number of
40
Respondents
20 Total
Inference : From the above table it is inferred that 18% of the respondents are Salary, 20% of
the respondents are Designation, 12% of the respondents are Benefits, and 28% of the
respondents are Psychological need satisfaction.10% of the respondents are Training Given and
12% of the respondents are Employer relation.
Work Culture 23 23
Benefits 27 27
Communication 20 20
Feedback Mechanism 30 30
120
100 100
100
80
60
40 2727 3030
2323 2020
20
0
Inference
From the above table it is inferred that 11% of the work culture and the 14% Benefits and the 10
% the respondents are Designation, 20% of the respondents are Benefits, and 30% of the
respondents are Feedback Mechanism.
Chart Title
400
350
300
250 Good
200 Bad
150
100
50
0
Purchase Finance Production R & D Dispatch Total
Inference: In above both diagram we can compare performance of all department, before
implementing concept of Retention Management and after implementing concept of Retention
Management. We can observe that, performance of all departments is increase after
implementing Retention Management concept.
I. Performance appraisal is a method of evaluating the behavior of employees in the work spot,
normally including both the quantitative and qualitative aspects of job performance.
Performance here refers to the degree of accomplishment of the tasks that make up an
individual‘s job. It indicates how well an individual is fulfilling the job demands. Often the term
is confused with effort, but performance is always measured in terms of results and not efforts.
Purpose
Performance appraisal aims at attaining the different purpose. They are:
To create and maintain a satisfactory level of performance.
To contribute to the employee growth and development through training self and
management development programs.
To help the superiors to have a proper understanding about their subordinates.
To guide the job changes with the help to continuous ranking.
To facilitate fair and equitable compensation based on performance.
The methods of performance Appraisal are basically classified as Traditional Methods, Modern Methods
and result – Oriented Appraisal: -
The Traditional Methods consists of ‘Graphic Rating Scales, Ranking Method, Paired comparison
Method, Forced Distribution Method, Checklist method, APPRAISAL, Group Appraisal and confidential
Report.
Modern Methods of evaluating performance appraisal are ‘Behaviorally Anchored Rating Scales
(BARS)’, BOS, Assessment Center’, Human Resource Accounting’, Management by objectives’,
Psychology Appraisal’.
Performance Improvement: Performance feedback allows the employee, manager, and personnel
specialists to intervene with appropriate actions to improve performance.
Placement Decisions: Promotions, transfers, and demotions are usually based on past or anticipated
performance. Often promotions are a reward for past performance.
Training and Development; Poor performance may indicate the need for retraining. Likewise, good
performance may indicate untapped potential that should be developed.
METHODS OF PERFORMANCE APPRAISAL
Career Planning and Development: Performance feedback guides career decisions about specific career
paths one should investigate.
Staffing Process Deficiencies: Good and Bad performance implies strength or weakness in the
personnel department‘s staffing procedures.
Group appraisal
Confidential reports.
4.3 Learning and Development - What it means to Retention
Introduction
After an employee selected, placed and introduced her or she must be provided with training facilities.
Training is the act of increasing the knowledge and skills of an employee for doing a particular job.
Training is a short-term educational process and utilizing a systematic and organized procedure by which
employees learn technical knowledge and skills for a definite purpose. Dale S. Beach Define training,
“The organized procedure by which people learn knowledge and/or skill for a definite purpose.” In other
words training improves, changes, moulds the employee’s knowledge, skill, behavior, aptitude, and
attitude towards the requirements of the job and organization. Training refers to the teaching and learning
activity carried on for the primary purpose of helping members on an organization, to acquire and apply
the knowledge, skills, abilities and attitudes needed by a particular job and organization.
Lead to prove profitability and/or more positive attitudes towards profit orientation
Improves the job knowledge and skills at all level of the organization
Improves the morale of workforce
Helps people identify with organizational goal
Helps create a better corporate image
Aids in organizational development
Learns from the trainee
Helps to prepare guideline for work
Organization gets more effective decision making and problem solving
It helps to improve labor-management relations.
Benefits to the individual which in turn ultimately should benefit the organization
Helps the individual in making better decisions and effective problem solving
Through training and development, motivational variables of achievement,
growth, responsibilities and advancement are internalized and operationised
It helps to an individual to handle stress tension or conflicts.
It provides information to improve leadership knowledge.
Develops a séance of growth in learning
Improves morale
Improves impersonal skills
Technological advances:
Every organization in order to survive and to be effective should adopt the latest technology, i.e.
mechanization, computerization, automation. Adoption of the latest technology means and methods will
not be complete until they are manned by employees possessing skill to operate them. So, organization
should train the employee to enrich them in the areas of changing technical skills and knowledge from
time to time.
Human relations:
Trends in approach towards personel management have change from the commodity approach to
partnership approach, crossing the human relations approach. So, today, management of most of the
organization has to maintain human relations besides maintaining sound industrial relations although
hitherto the managers are not accustomed to deal with workers accordingly. So, training in human
relations is necessary to deal with human problems and to maintain human relations.
Methods of Training
The most widely used methods of training used by organizations are classified into two categories: On-
the-Job Training & Off-the-Job Training.
ON-THE-JOB TRAINING
It’s given at the work place by superior in relatively short period of time. This type of training is
cheaper & less time-consuming. This training can be impacted by basically four methods: -
Job Rotation: -
In this method, the trainees move from one job to another, so that he/she should be able to perform
all types of jobs. E.g. In banking industry, employees are trained for both back-end & front-end jobs. In
case of emergency, (absenteeism or resignation), any employee would be able to perform any type of job.
Lectures/Conferences:-
This approach is well adapted to convey specific information, rules, procedures or methods. This method
is useful, where the information is to be shared among a large number of trainees. The cost per trainee is
low in this method.
Films:
It can provide information & explicitly demonstrate skills that are not easily presented by other
techniques. Motion pictures are often used in conjunction with Conference, discussions to clarify &
amplify those points that the film emphasized.
Simulation Exercise: -
Any training activity that explicitly places the trainee in an artificial environment that closely mirrors
actual working conditions can be considered a Simulation. Simulation activities include case experiences,
experiential exercises, vestibule training, management games & role-play.
Cases: -
Present an in depth description of a particular problem an employee might encounter on the job. The
employee attempts to find and analyze the problem, evaluate alternative courses of action & decide what
course of action would be most satisfactory.
Vestibule Training: -
Employees learn their jobs on the equipment they will be using, but the training is conducted away
from the actual work floor. While expensive, Vestibule training allows employees to get a full feel for
doing task without real world pressures. Additionally, it minimizes the problem of transferring learning to
the job.
Internal Trainer: - After assessment of need of training, they search for a trainer in theirs
company who can train there employee. They search trainer among their employees.
External trainer: - If they didn’t find internal trainer then they go for External trainer. They try to find
external professional trainer from their personnel contact, by giving advertisement in news paper etc.
Design program for training: - HR manager or head of the department present there need to trainer.
They assess type of training and design training program by the help of trainer within the budget.
Chapter 5: Findings, Suggestion and
Conclusions
FINDINGS
From the above survey conducted it is inferred that 78% of the respondents are male,
22% of the respondents Female.
23% of the respondents are 20-30 aged persons, 56% of the respondents are 31-40 aged
persons, 15% of the respondents are 41-50 aged persons and 6% of the respondents are
above 50 aged persons.
48% of the respondents are junior executive, 21% of the respondents are Operator,
and 31% of the respondents are Manager.
60% of the respondents are UG, 20% of the respondents are PG, 10% of the respondents
are diploma, and 10% of the respondents are HSC.
55% of the respondents are below 5yrs, 15% of the respondents are 6-10yrs, 10% of the
respondents are 11-15yrs, 15% of the respondents are 16-20yrs and 5% of the
respondents are above 20yrs.
44% of the respondents Married and 56% of the respondents are Unmarried.
54% of the respondents are below 10000, 15% of the respondents are 10000-20000, 16%
of the respondents are 20000-30000, and 15% of the respondents are above 30000.
54% of the respondents are Campus Recruitment, 15% of the respondents are
Consultancy, 16% of the respondents are Direct Recruitment, and 15% of the respondents
are Reference.
94% of the respondents are Yes, and 39% of the respondents are No.
28% of the respondents are Leave Encashment, 12% of the respondents are Holiday pay
benefits, 25% of the respondents are Vocation pay benefits, 13% of the respondents are
Worker’s compensation benefits and 22% of the respondents are Life Insurance benefits.
48% of the respondents are Flexible timings, 12% of the respondents are Holiday homes,
24% of the respondents are Hospitalization, and 16% of the respondents are Overtime.
42% of the respondents are strongly agree, 11% of the respondents are Agree, 41% of the
respondents are Neutral,4% of the respondents are disagree and 2% of the respondents
are strongly disagree.
31% of the respondents are strongly agree, 21% of the respondents are Agree, 40% of the
respondents are Neutral,5% of the respondents are disagree and 3% of the respondents
are strongly disagree.
18% of the respondents are Salary, 20% of the respondents are Benefits, 24% of the
respondents are Needs Incentives, and 38% of the respondents are Position.
18% of the respondents are Salary, 20% of the respondents are Designation, 12% of
the respondents are Benefits, and 28% of the respondents are Psychological need
satisfaction.10% of the respondents are Training Given and 12% of the respondents are
Employer relation.
23% of the respondents are Salary, 27% of the respondents are Designation, 20% of
the respondents are Benefits, and 30% of the respondents are Feedback Mechanism.
Suggestion and Recommendation:
Perform various task to motivate employee for work, because various employee cannot work
with motivation they just do it, because organization pay for them.
Most of respondent feel that they are well taken care by their employer but still should
have regular meeting with employees and ask about their feedback.
The initial implementation resulted in a number of important human resource priorities and strategies,
such as performance management, leadership and management development, attraction and retention,
employee learning and development and culture, all of which are supported by the HR Strategy for the
HR Community.
The critical next step in the process is the implementation of the Retaining Retention Management. Plan
for the HR Community. Individually, members of the community and their managers should work
together to move forward individual career development plans.
The HR Community must work together to promote a Retention Management mindset,
Commit to supporting development as a professional group, and integrate Retention Management into the
daily fabric of doing business.
Retention: We understand it help to developing and implementing practices that reward and support
employees. Employee development: Retention Management ensuring continuous informal and formal
learning and development. Performance management: Retention Management is specific processes that
nurture and support performance, including feedback/measurement.
Testing of Hypothesis
Retention Management has been developed as a platform for corporate world to manage talents of
employee, for company benefits.
From above surveys and changes in performance report getting follows information:
For company Retention Management is effective process.
Retention Management is effective for Company if: Remark from “ Data of
Analysis”
= Yes OR X = No
Quality of the Product increase.
Ratio of employees to left job is decrease, and new candidate are
increase in organization.
Employee getting satisfaction from the job
Complaints of employee reduced.
Above table show that all the criteria set for Company, to show effective Retention Management process,
which is helpful to employee as well as organization.
Therefore project is proved the Null hypothesis & disprove the alternative hypothesis.
Null Hypothesis:
Appendices
Company Workshop
Name of Employee:
Roll No.
Department:
Designation:
Joining Date:
Qualification:
Bibliography
Bibliography
Books:
1) Oneclickhr.com
2) Weckipedia.com
3) Google.com
4) Amanet.org
5) Cityhr.com
Questionnaires
Questionnaires
1. Name :
a) Campus Recruitment
b) Consultancy
c) Direct Recruitment
d) Reference
a) Yes
b) No
a) Leave Encashment
b) Holiday pay benefits
c) Vocation pay benefits
d) Worker’s compensation benefits
a) Flexible timings
b) Holiday homes
c) Hospitalization
d) Overtime
11. Are you being given ongoing or continuous training program in your organization?
a) Yes
b) No
a) Good
b) Needs improvement
c) Not bad
a) Yes
b) No
15. What do you think about your talent after joined in to the company?
a) Good
b) Excellent
c) No improvement
d) Bad
17. How effective do you feel is the feedback mechanism in your organization?
a) Good
b) Indifferent
c) Needs improvement
d) Needs a lot of improvement
18. What in your opinion satisfies an employee the most in an organization?
a) Salary
b) Designation
c) Benefits
a) Work Culture
b) Benefits
c) Communication