Professional Documents
Culture Documents
Condensed Training
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS1|EN
QICPIC | PAQXOS | Evaluation
Overview
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS2|EN
QICPIC | PAQXOS | Evaluation
Pre sample setup
▪ Evaluation
» Can load pre-saved values
» Can be changed post run
» Open dialogue
▪ Settings stored if used with SOP
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS3|EN
QICPIC | PAQXOS | Evaluation
General comments
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS4|EN
QICPIC | PAQXOS | Evaluation
Post run changes
▪ Volume Model
» Consider the shape of particles
» If approx. spherical use sphere
from EQPC
» Recalculate using different
parameters to perform “what if”
to demonstrate effects
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS6|EN
QICPIC | PAQXOS | Evaluation
Evaluation options – Diameters
▪ Diameters
» As many or as few can be ticked.
» More parameters increases
processing time
» Use help files for complete
description
▪ Standard Diameter
» This defined the default output
» All ticked items are calculated
standard diameter is the default
output.
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS7|EN
QICPIC | PAQXOS | Evaluation
Evaluation options – Diameters
▪ User Modes
» Allows evaluation of subsets of
particles.
» Tick user mode box then to
open dialogue
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS8|EN
QICPIC | PAQXOS | Evaluation
Evaluation options – Shape descriptors
▪ Shape descriptors
» Useful help file & hover functions
» If using a user mode filter, as the
diameter output, all shape data
will be derived from the filtered
data
▪ Standard shape descriptor
» Default for output if not over
ridden by user command
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS9|EN
QICPIC | PAQXOS | Evaluation
Evaluation options – Class limits
▪ ISO conformance
» Discards particles >1/3 of frame size
▪ Class limits
» Auto works well in many situations
» Manual can be used
» Full flexibility for manual or suggested
classes
» Don’t forget to press this button after
making your selection!
» HINT: when comparing samples use
same class limits
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS10|EN
QICPIC | PAQXOS | Evaluation
Evaluation
▪ ISO conformance
» Discards particles >1/3 of frame size
▪ Class limits
» Auto works well in many situations
» Manual can be used
» Full flexibility for manual or suggested
classes
» Don’t forget to press this button after
making your selection!
» HINT: when comparing samples use
same class limits
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS11|EN
QICPIC | PAQXOS | Evaluation
Evaluation options – Load/save
© Copyright 2020, Sympatec GmbH, D-38678 Clausthal-Zellerfeld, Germany | QICPIC Evaluation Condensed Training| 2020908APS12|EN