Professional Documents
Culture Documents
_____________________________________________
Signature and company seal of person in charge
TC1/TD4
IQ
2. Set-Up/Installation
2.1 Unpacking and Set-up Y N
Check of delivery note with actually delivered items delivery complete
Packing obviously damaged
Are damages on the instrument observable
TC1/TD4 protection tube (polymer pipe) not moved/damaged moved/damaged
User manual included
Check if power switch at power supply unit is in position "0"
Connect TensioTouch at instrument backside acc. user manual done
Connect power supply unit at instrument backside acc. user manual done
Level the unit with adjustable feet and integrated bubble level done
At TC1:
Move the sample stage manually downwards with the hand wheel
Take out the protection tube once free (careful with the hook at weighing system)
Desinfection of hands (attention: Don´t use soap)
Alternative: Use single-use gloves, POWDERFREE!
Unpack the ring/plate
Clean (with Ethanol or Acetone) and anneal the ring/plate
Place the ring/plate on the hook (don´t pull on the hook heavily)
Adjust weighing system with calibration weight (acc. user manual)
Tare the weighing system (acc. user manual)
IQ performed
_____________________________________________ ____.____.________
Signature and company seal of person in charge Date
_____________________________________________ ____.____.________
Signature LAUDA Scientific representative Date
TC1/TD4
OQ
3 Function test with standard measurement
3.1 Default/Entered measuring parameters
Acc. either used method continue with 3.1.1 OR 3.1.2
3.1.1 Ring parameter
Ring radius (change default parameter if needed) mm
Ring wire radius (change default parameter if needed) mm
3.1.2 Plate parameter
Length of plate (change default parameter if needed) mm
Thickness of plate (change default parameter if needed) mm
3.2 Set-up of sample stage in the Tensio.Touch software for the measurement
Only at TD4
position (maximum height of sample stage)
_____________________________________________ ____.____.________
Signature and company seal of person in charge Date
_____________________________________________ ____.____.________
Signature LAUDA Scientific representative Date