Professional Documents
Culture Documents
Seals Fail?
By Jack Ferguson https://www.sepco.com/community/article/why-
do-mechanical-seals-fail/
Mechanical seals prevent pumps from leaking by containing the pressure of the
pumping process and withstanding the friction caused by the rotating shaft. The right
seals provide reliable operation, less wasted product, more cost savings, and fewer
housekeeping issues. However, why do mechanical seals fail?
In many pump systems, a mechanical seal is the first component to fail. They are
also the most common cause of pump downtime and account for more pump repair
costs than any other part of a pump. Often, however, the seal is not to blame. Other
culprits include:
Page 1 of 5
Bearing wear
Vibration
Misalignment
Improper seal installation
Incorrect seal choice
Lubrication contamination
Therefore, teams must install and maintain seals properly to prevent failures. Teams
must pinpoint the root causes of each failure. But how do plant and maintenance
managers isolate the root cause though?
One option is to have a seal manufacturer perform a seal failure analysis. Some
seal manufacturers offer complimentary seal analysis on any seal, not just theirs.
End users simply send their mechanical seal to the manufacturer’s engineering team.
If multiple seals need to be analyzed, they may come on-site to perform the root cause
analysis. Most reviews can be completed in about two weeks.
With a seal failure analysis, experts deliver a complete diagnosis of why the
mechanical seal failed and what actions to take to prevent future failures. The experts
who examine the seal can ensure that the ideal seal for the application has been
selected. If not, they recommend alternate technologies.
After an analysis, the manufacturing ream will also help end users optimize their
system conditions and achieve the best possible operation from their assets.
Optimizing mechanical seal performance also improves shutdown to shutdown
processes. This information, along with alternative proposals as needed, help end
users prevent further failures and improve their return on investment.
Page 2 of 5
An example of a seal failure analysis form
The story of what the seal experienced during operation, before it failed, can be
revealed by investigating the failure. An analysis may determine or confirm:
Eliminating the problems identified by the seal failure analysis may have a huge impact
on the system. Several improvements may be realized, including:
Page 3 of 5
Best possible life from the equipment
Improved performance
Decreased maintenance costs
Increased ROI
A damaged seal reveals failure clues. Each symptom or clue may mean different
things based on:
Page 4 of 5
The components of a mechanical seal returned for analysis:
1. O-rings
2. Seal sleeve
3. Outboard rotary seal ring and holder
4. Lock collar
5. Gland
6. Gland insert
7. Stationary seat ring
8. Inboard rotary holder and seal ring
For instance, a stationary seal face is cracked, originating from the drive pin slot. Also,
sticky residue has adhered to the face. This crack means something different than a
stationary seal face with a crack located at a different position and product residue
that is fairly clean and not tacky.
Both cases look the same on a simple table listing all the seal damage. However, the
failure cause is different. In the first example, the crack was caused by the product
attempting to stick the rotary and stationary faces together. This adhesion caused
increased torque on the stationary pin. This caused the stationary face to crack.
In the second example, the crack was likely caused by impact. This indicated that the
seal was not installed properly. Different symptom combinations reveal multiple
failure modes.
Analysis Requirement
In conclusion, to determine the true reason that a seal failed, seal failure analysis is
required. Without a diagnosis of the system problem, failure will continue.
Jack Ferguson is a seal reliability engineer with Sealing Equipment Products Co. Inc.
(SEPCO). He is a recent graduate of Clemson University with a degree in Mechanical
engineering. Ferguson may be reached at jackf@sepcousa.com.
Page 5 of 5