Professional Documents
Culture Documents
Atlas Copco Drilling Rigspdf
Atlas Copco Drilling Rigspdf
M.V.R.SUBBARAO
Hyderabad
1
BVB 25 Wagon Drill:
Robust Rubber tyred three
wheeled wagon drill.
Available In both DTH & TH
versions
Mostly used in cement and small
mines
Top Hammer : 48-76mm
DTH : 85 – 130 mm
Can be converted TH to DTH and
vice versa using conversion kit
450cfm/150 psi Compressor (XAH
210)
LM 100 Crawler Rig
One of the most popular crawler
drill rigs used in quarries
Suitable for DTH drilling
Hole Dia : 105 – 115 mm
Hammer Used : QL 40
Drilling Rate : 8 – 12 m/hr
No track oscillation Cylinder
Compressor : 450 Cfm / 150 psi
Horizontal Drilling possible
Option of water injection system
exists for dust control
CM 341 Crawler Rig
More Powerful and versatile rig
compared to LM 100 and is suited
for much tougher jobs.
Intended for quarrying and Open
cast mining.
Suited for DTH Drilling for hole dia
105 -115mm.
Hydraulic track oscillation cylinders
present.
Hammer used QL 40
Can be packaged with both
450cfm/150 psi or 600cfm/200psi(for
higher drilling rates)
Option of dust collector exist
ROC 203:
Crawler mounted Pneumatic drill rig
with hydraulic traction
Available in Both TH & DTH
Versions and can be interchanged
using a conversion kit
TH : 48 – 76mm
DTH : 85 – 130 mm
Compressor : 450cfm/150 psi
Toe hole drilling possible using this
drill
Option of Dust Collector exists
Has got much smaller turning radius
therefore much easier to maneuver
ICM 260
Light weight fully hydraulic drill with
on board compressor
Suitable for DTH drilling, 105 -
115mm hole dia. Range
Hammer used : QL 40
Mostly used in cement mines
Compressor rating: 300cfm/200psi
Manual Rod changer
Water injection system provided for
dust suppression
Prime Mover : Cummins engine,
6BTA5.9C
IBH 10
One of the most common and
popular 6 inch pneumatic Crawler
drill in India.
Can be converted for 41/2” drilling
if required
Compressor : 520cfm/170psi
Hole Range : 152mm
Max Hole Depth : 14.63m/18.20
m through 3/4 rod changer
Engine : Cummins
CM 470:
Rugged and simple crawler
drill with direct hydraulic
controls
Hole Range : 64-89mm
Used mainly to avoid
oversized boulders in quarry
application
Drilling by 15 KW rock drill
Compressor :
FAD : 176 Cfm, 8 bar
Engine : Cummins
ROC T15
Smallest surface drill in the range
Compact, small and powerful
hydraulic drill
Hole Range : 23 – 45 mm
Radio Remote Control Option
exists
Suitable for Small Construction
jobs, DSI & unique construction
jobs like bolting, boulder blasting
and trenching etc.
Weight : 2800 Kg (Excluding
Options)
ROC L6
High Capacity DTH crawler
drills primarily designed for
quarry blast hole drilling
Hole Range : 95-152mm
Compressor: XRX 10
Engine : C11,C13
FAD @ 25 bar : 625 cfm
@ 30 bar : 750cfm
Automatic Rod Handling
system
FOPS/ROPS protected cabin
Hammers Used : TD 35, COP
44, COP 54 GE
ROC L8
High Capacity Crawler drill
suitable for large scale mining
operations
Hole Range : 110 – 203mm
Compressor : XRX 10, 858
cfm at 25 bar/363psi
C13, C15 water cooler turbo
charged engines being used
ROPS & FOPS approved air
conditioned cabin
Automatic rod handling system
No levelling jacks
Weight excluding option 22.6
tonnes
IDM 30
Self contained completely
hydraulic, self propelled blast
hole drill.
Available In both diesel and
electrical versions
Hole dia : 152-165mm
Available in both DTH/rotary
drilling versions
Pull down force : 30,000 lb
Twin cylone for dust
suppression
Max Drilling : 27.4m
Single pass drilling : 7.12m
IDM 45
Self contained completely
hydraulic, self propelled blast
hole drill.
Available In both diesel and
electrical versions
Hole dia : 200-250mm
Available in both DTH/rotary
drilling versions
Pull down force : 45,000 lb
Twin cylone for dust
suppression
IDM 70
Self contained completely
hydraulic, self propelled blast
hole drill.
Available In both diesel and
electrical versions
Hole dia : 229-270mm
Available in both DTH/rotary
drilling versions
Pull down force : 70,000 lb
Twin cylone for dust
suppression
Boomer Range Snapshot
S.No Boomer Model Coverage Area
Single Boom
1 Boomer S1 L 6 - 29m2
2 Boomer S1 D 6 - 31m2
3 Boomer 104 6 - 20m2
4 Boomer 281 6 - 31m2
5 Boomer L1 C 15 - 64m2
Twin Boom
6 Boomer 282 8 - 45m2
7 Boomer E2 C 112m2
8 Boomer M2 D 10 - 53m2
9 Boomer L2 D 15 - 104 m2
Three Boom
10 Boomer E3 C 137 m2
11 Boomer XE3 C 198 m2
2
12 Boomer WE3 c 186 m
CONSTRUCTION TOOLS ( CTO )
HYDRAULIC BREAKER
Salient Features:
Works on Oil gas Principle
Auto Control
Vibro Silenced
Contilube
Patented Helicoil system
Energy Recovery, higher
impact energy
Applications
Trenching
Road Construction
Secondary Breaking & many
more
Our Breaker Range
S.No Breaker Model Carrier Weight Working tool dia. Operating Weight
Small Breakers
1 SB 302 4.5 - 9.0 t 80 mm 304 Kg
2 SB 452 6.5-13.0 t 95 mm 441 Kg
3 SB 552 9.0 - 15.0 t 100 mm 521 Kg
Medium Breakers
4 MB 750 10 -17 t 100mm 750 Kg
5 MB 1200 15-26 t 120mm 1200 Kg
6 MB 1500 17-29 t 135mm 1500 Kg
7 MB 1700 19-32 t 140mm 1700 Kg
Heavy Breakers
8 HB 2200 26 - 40 t 150mm 2200 Kg
9 HB 3000 32 - 50 t 165 mm 3000 Kg
10 HB 3600 35 - 63 t 170mm 3600 Kg
11 HB 4200 42 - 75 t 180 mm 4200 Kg
12 HB 5800 58 - 100 t 200 mm 5800 Kg
13 HB 7000 70 - 120 t 210 mm 7000 Kg
14 HB 10000 85 - 140 t 240 mm 10000 Kg
Hydraulic Compactor
100% faster when compared to
manual
method of compaction
Much Higher Compaction
Better Finishing
Lesser Undulation Which saves
concrete.
Due to uniform compaction,
concrete consumption is less
and hence lesser costs
Cuts down dependency on
labour.
Contd…
Salient Features
Constant Lubrication System
Integrated input flow and pressure
control
Flat top mounting base for versatility
Removable base plate (HC 920 - HC
2041)
Application Areas
Irrigation Canals
Pipeline Projects
Hydropower
Urban Development(water/sewage)
Many more areas which are still to be
explored
Hydraulic Compactor Specs:
HC- Hydraulic Compactors HC 308 HC 409 HC 920 HC 2040 HC 2041
Carrier Weight Class t 3 to 8 4 to 9 9 to 20 20 to 40 20 to 40
Service Weight Kg 320 430 880 1050 1055
Oil flow rate l/min 57 76 114 151 189
Operating Pressure bar 150 150 150 150 150
Vibrating force t 2.3 3.6 7.3 10.5 11.4
Vibrating Frequency n/min 2100 2200 2200 2200 2200
Base Plate Size (W X L) mm 455 x 693 610 x 929 710x1178 864x1136 864x1136
2
Plate Coverage m 0.24 0.42 0.63 0.74 0.74
Height mm 623 622 764 786 786
CTO Special Prducts
24