Professional Documents
Culture Documents
OCTOBER 2019
MIDTERM TEST
EAT 103
APPLIED MECHANICS
DURATION: 1 HOUR
DATE: TIME:
INSTRUCTIONS TO CANDIDATE:
2. This is a closed book examination – this means you are not permitted to use any text books or
study aids in the examination. Formula sheet provided with this question paper for reference.
4. You must answer the required number of questions only. Any additional answer will not be
marked
5. You should put a cross through any work you do not wish to be marked.
The member of a truss are pin connects at joint O as shown in the Figure 1a below. Determine
the magnitude of F1 and its angle θ for equilibrium. Set F2 = 6 kN.
[10 Marks]
QUESTION 2
Calculate the shear force V and bending moment M at a cross section 0.5 m from the
fixed support of the cantilever beam AB shown in figure 1.
[10 Marks]
FOR
EAT 103
APPLIED MECHANICS
Question 2