Professional Documents
Culture Documents
EDIFICACIONES
SAR SA DE CV
Saul Jaramillo
Quote no 2270179
04/23/2021
Quote
Quote number: 2270179
Date: 04/23/2021
2/19
Dear Saul,
Thank you for your recent enquiry. Further to our discussions, please find enclosed our
quotation as per your requirements.
We trust the enclosed information is of interest, and look forward to hearing back with your
comments. If you require any further information on this or any of our products and services,
please do not hesitate to contact me.
Yours sincerely
Alejandro Hoyos
Alex Hoyos
Senior Sales Manager
Phone: +1 210-338-1683
Mobile: +1 956-279-3038
alex.hoyos@atlascopco.com
Price Summary
Description Qty Unit Value Total Price
(USD) (USD)
GA90VSD+FF, 125 HP, air cooled, variable 1 68,294.00 68,294.00
speed drive, screw air compressor including:
Delivery Terms Equipment will be delivered in our standard packaging unless otherwise
stated (off-loading and positioning to be done by others). Optional items may impact delivery.
Delivery time can be confirmed upon acceptance of your order/final instructions to proceed.
Quote
Quote number: 2270179
Date: 04/23/2021
5/19
Model: GA 75L-110VSD+ Oil Injected Rotary Screw Air Compressor – Air Cooled
Overview
The new revolutionary GA 75L-110 VSD+ is packed with innovative features that increase its
efficiency, cut its energy consumption, lower its noise levels, and reduce its operating costs. On top of
that, it meets or even exceeds all currently applicable standards.
With its innovative vertical design, Atlas Copco’s GA 75L-110 VSD+ brings a game-changing
revolution in the compressor industry. It offers Variable Speed Drive+ as standard, a compact motor
and footprint and iPM (interior Permanent Magnet) technology. The GA 75L-110 VSD+ reduces
energy consumption by 50% on average, with uptimes assured even in the harshest operational
conditions.
The GA 75L-110 VSD+ is the air compressor of the future, designed and built by Atlas Copco. It will
set a new standard for years to come in the compressed air industry.
Key Features
Drive Motor
The compressor is powered by an oil cooled, interior permanent magnet
(IPM) motor. This compact, custom designed motor exceeds NEMA
premium efficiency standards and requires no cooling air flow or re-
greasing, which increases uptime and reliability while virtually eliminating
motor maintenance. The pressure-tight, oil-cooled drive system has no
gears or belts and no shaft seal, making it virtually maintenance-free. The
IP66 enclosure provides you with the peace of mind that your motor is well
protected from any exposure to the environment.
The motor drives the male rotor of the element directly making gears or belts and
shaft seal redundant. This allows a pressure tight drive train through which the oil
flows from the motor to the element.
By using oil, a more efficient cooling medium, on the drive train, no motor cooling fan
is needed. This in combination with an already more efficient (less cooling needed)
motor allows us to save an extra amount of energy on the cooling needs of the unit
which again contributes to an extra saving on the SER!
NEOS VSD
Benefits
Variable Speed Drive Compressor - Saves up to 50% in your energy cost
State of the Art Energy efficiency – Neos Drive, permanent magnet motor and Airend combine for
low required energy per compressed air flow
Elektronikon® operating system - Controller to ensure optimum efficiency, saver cycle, pressure
regulation
Ease of installation - Small foot print and fully integrated & extremely compact design that saves on
installation cost
Sound insulated canopy - Low noise level
Heavy Duty Air Filter - Easy to replace air filter offers long lifetime and high reliability
Options
• Integrated Dryer and Filters
• Energy Recovery
• Inlet Prefilter
• EQ4i / EQ6iTropical Thermostat
• High Ambient Version (115-131F)
• Food Grade Oil
• Power Duct Fan
• Water Cooled
Quote
Quote number: 2270179
Date: 04/23/2021
7/19
Performance (1)
1. Operating pressure 58 102 138 181 psi(g)
2. Capacity delivered @ min rpm 102.2 103.6 126.7 150.3 cfm
3. Capacity delivered @ max rpm 666.9 648.1 570.8 461.4 cfm
4. Package power input @ min rpm 17.7 22.4 29.5 39.8 kW
5. Package power input @ max rpm 95.1 111.9 113.1 108.4 kW
(2)
6. Sound level 74 / 3 dB(A)
7. Minimum ambient temperature 32 °F
8. Maximum ambient temperature 115 °F
Cooling data
1. Cooling air flow (Compressor / Dryer) 10277 / 975 cfm
2. Discharge air temperature (ambient + °F) 4 °F
Electrical Data
1. Voltage/Phase/Frequency 380-460 / 3 / 60
2. FLA 155 @ 460V A
3. Max Fuse (Fast Blow Fuse Only) 150 A
Motor data
1. Motor (Nominal) 125 hp
2. Motor type Synchronous Interior Permanent Magnet
3. Motor Enclosure IP66
4. Motor Efficiency at Full Load 96 %
5. Bearing Anti-friction
6. Insulation F w/ B rise
7. Starter type Soft Start
Physical data
1. Dimensions (L x W x H) 85.5 x 51.2 x 77.2 inches
2. Shipping weight 4543 Lbs.
3. Air discharge size 2 1/2 in NPT
4. Condensate drain size (OD) 6 mm.
5. Oil sump capacity 13.7 gallons
1. Performance (free air delivery) measured according to ISO1217.
2. Operating Sound Level: Operating sound levels for machines equipped with recommended standard motors and enclosures are guaranteed
±3 dB(A) when measured in free field conditions at a distance of 1 meter according to CAGI PNEUROP Test Code.
Quote
Quote number: 2270414
Date: 04/23/2021
8/19
The Mk5s ELEKTRONIKON TOUCH® control system provides energy efficient load/no load control.
The graphic based controller has a 4.3” HD color display and uses icons for touch and swipe
navigation. The unit can be programmed in a choice of 32 languages. The Elektronikon™ controller
has following functions: Controlling the compressor, Protecting the compressor, Monitoring
components subject to service and Automatic restart after voltage failure (ARAVF) to provide efficient
operation of the compressor. Standard features include SMARTLINK 3G connectivity, built-in phase
sequence relay. A partial description for the module's capabilities include*:
Inlet conditions
1. Barometric pressure 14.5 psi(g)
2. Ambient air temperature 68 °F
3. Relative humidity 0 %
Performance(1)
1. Operating pressure 125 psi(g)
2. Capacity delivered 566 cfm
3. Package power input, loaded 111.2 kW
4. Package power input, unloaded 28.6 kW
(2)
5. Sound level 74 dB(A)
6. Minimum ambient temperature 32 °F
7. Maximum ambient temperature 115 °F
Cooling data
1. Cooling air flow 9,368 cfm
2. Discharge air temperature (ambient + °F) 5 °F
Electrical data
1. Motor 125 hp
2. Motor type Induction
3. Enclosure TEFC
4. Efficiency 95.0 %
5. Bearing Antifriction
6. Insulation F w/B rise
7. Starter type Wye-Delta
Physical data
1. Dimensions (L x W x H) 88.5 x 42.5 x 77.0 inches
2. Shipping weight 3,837 lbs
3. Air discharge size 2.5 inches NPT
4. Condensate drain size 1/8 inches NPT
5. Oil sump capacity 7.1 gal
MK5 GATEWAY
ATLAS COPCO COMPRESSORS
Product features
• Control commands for ES systems and compressors
• Same functionality as available through Elektronikon interface
• Readout for Fixed speed, VSD, Turbo & high-pressure compressors, dryers and ES:
• Values: Analog & Digital signals
• Status
• Counters
Supply voltage
• 24 VAC (+40%,-30%)
• 50-60Hz
• 16VA
Quote
Quote number: 2270179
Date: 04/23/2021
12/19
Filtration
Capacities
Product Highlights
Principle Data
Max 232
Compressed air inlet pressure psi(g)
Min 14.5
Max 120.912
Compressed air inlet temperature °F
Min 34
Max 149
Ambient temperature °F
Min 34
Recommended pressure drop Max 5 psi
Design data
Number of filter elements 1
Dimension of inlet and outlet connections 2 1/2" G/NPT
Net weight 15.2 lb
Shipping weight 7.6 lb
Shipping dimensions: Length 28.3 in
Width 8.3 in
Height 7.5 in
Correction Factors
Working
15 29 44 58 73 87 102 116 145 174 203 232
Pressure (psig)
Correction
0.4 0.5 0.7 0.8 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
Factor
Quote
Quote number: 2270179
Date: 04/23/2021
15/19
Atlas Copco Vertical Industrial air Receiver with base ring ASME code stamped,
including:, standard surface treatment, basic documentation incl. data sheet, dimension
drawing and ASME certificates
SPECIFICATIONS
Model: LV1060-150
Capacity: 1060 Gal.
Dimensions OD x HT: 54” x 155”
Aprox. Weight: 1910 Lbs.
Design Pressure: 150 Psig.
In & out conn.: 6” 150RFSO Flange
Quote
Quote number: 2270179
Date: 04/23/2021
17/19
LIMITATION OF LIABILITY – IN NO EVENT SHALL ATLAS COPCO BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, however arising, whether in warranty, strict liability, contract, tort, negligence or otherwise, including but
not limited to loss of profits or revenue, loss of total or partial use of the Products or facilities or services, downtime cost, or claims of the
Purchaser for such or other damages whether on account of Products furnished hereunder or delays in delivery thereof or services
performed upon or with respect to such Products. Atlas Copco’s liability on any claim whether in warranty, strict liability, contract, tort,
negligence or otherwise for any loss or damage arising out of, connected with, or resulting from this contract or the performance or breach
thereof, or from the design, manufacture, sale, delivery, resale, repair, replacement, installation, technical direction of installation,
inspection, servicing, operation or use of any Product covered by or furnished under this contract shall in no case (except as provided in
the section entitled “Patent Indemnity”) exceed the purchase price allocable to the Product or Part thereof which gives rise to the claim.
All causes of action against Atlas Copco arising out of or relating to this contract or the performance hereof shall expire unless brought
within on year of time of accrual thereof.
PRICES – Prices to the Purchaser shall be the Atlas Copco list price in effect at time of order. Atlas Copco may, upon thirty (30) days
prior written notice to Purchaser, change prices, or other terms of sale affecting the Products, by issuing new price schedules, bulletins or
other notices.
This contract applies to new Products only. Purchases of used equipment shall be on terms to be agreed upon at time of sale to
Purchaser.
This price does not include any Federal, state or local property, license, privilege, sales, service use, excise, value added, gross
receipts, or other like taxes which may now or hereafter by applicable to, measured by or imposed upon or with respect to this transaction,
the property, its purchase, sale, replacement, value, or use, or any services performed in connection therewith. Purchaser agrees to pay
or reimburse Atlas Copco, its subcontractors or suppliers any such taxes, which Atlas Copco, its subcontractors or suppliers are required
to pay or collect or which are required to be withheld by Purchaser.
The price shall also be subject to adjustment in accordance with the published Price Adjustment Clauses, which price adjustment
information shall supersede the terms of this Section 8, where inconsistent herewith.
INFORMATION FURNISHED PURCHASER – Any design, manufacturing drawings or other information or materials submitted to the
Purchaser and not intended for dissemination by Purchaser remain the exclusive property of Atlas Copco and may not, without its consent,
be copied or communicated to a third party.
PATENT INDEMNITY – For purposes only of this Section 10, where used, the designation “Atlas Copco” shall be deemed to mean Atlas
Copco North America Inc. and its subsidiaries.
Atlas Copco shall at its own expense defend any suits or proceedings brought against purchaser insofar as based on an allegation that
Products furnished hereunder constitute an infringement of any claim of any patent of the United States of America, other than a claim
covering a process performed by said Products or a product produced by said Product, provided that such Products are manufactured by
Atlas Copco, are not supplied according to Purchaser’s detailed design, are used as sold by Atlas Copco. Purchaser shall have made all
payments then due hereunder, and Atlas Copco is notified promptly in writing and given authority, information and assistance for the
defense of said suite or proceeding; and Atlas Copco shall pay all damages and costs awarded in any suit or proceeding so defended,
provided that his indemnity shall not extend to any infringement based upon the combination of said Products or any portion thereof with
other Products or things not furnished hereunder unless Atlas Copco is a contributory infringer. Atlas Copco shall not be responsible for
any settlement of such suit or proceeding made without its written consent. If in any suit or proceeding defended hereunder any Product
is held to constitute infringement, and its use is enjoined, Atlas Copco shall, at its option and its own expense, either replace said Products
with non-infringing Products; or modify them so that they become non-infringing; or remove them and refund the purchase price and the
transportation costs thereof. THE FOREGOING STATES THE ENTIRE LIABILITY OF ATLAS COPCO AND AFFILIATES WITH
RESPECT TO PATENT INFRINGEMENT.
To the extent that said Products or any portion thereof are supplied according to Purchaser’s detailed design or instructions, or modified
by Purchaser, or combined by Purchaser with equipment or things not furnished hereunder, except to the extent that Atlas Copco is a
contributory infringer, or are used by Purchaser to perform a process, or produce a product, and by reason of said design, instructions,
modification, combination, performance or production, a suit or proceeding is brought against Atlas Copco, Purchaser agrees to indemnify
Atlas Copco in the manner and to the extent Atlas Copco indemnities Purchaser in this Section 10 insofar as the terms hereof are
appropriate.
ASSIGNMENT – Any assignment of this contract or any rights hereunder, without prior written consent of Atlas Copco by a duly authorized
representative thereof shall be void.
TERMINATION – Any order or contract may be cancelled by Purchaser only upon payment of reasonable charges (including an allowance
for profit) based upon costs and expenses incurred, and commitments made by Atlas Copco.
PARTIAL INVALIDITY – If any provision herein or portion thereof shall for any reason be held invalid or unenforceable, such invalidity or
enforceability shall not affect any other provision or portion thereof, but these conditions shall be construed as if such invalid or
unenforceable provision or portion thereof had never been contained therein.
REMEDIES – The remedies expressly provided for in these conditions shall be in addition to any other remedies, which Atlas Copco may
have under the Uniform Commercial Code or other applicable law.
SMARTLINK: The equipment may include a data monitoring service called SMARTLINK. The data received by Atlas Copco may be used
by Atlas Copco and certain third party distributors and contractors for the purpose of increasing overall customer service. Atlas Copco will
use commercially reasonable efforts to ensure that Purchaser’s data is kept confidential. Purchaser acknowledges that the use of the
SMARTLINK is provided “as is”, that use of the service is entirely at Purchaser’s risk, and that Atlas Copco may discontinue the
SMARTLINK service at any time. Purchaser may request discontinuance of the SMARTLINK service at any time.
NOTE: Sale of the equipment or services described or referred to herein at the price indicated is expressly conditioned upon the terms
and conditions set forth on the front and back of this page. Any confirmatory action by the Purchaser hereunder, or any acceptance of
such equipment of services, shall constitute assent to said terms and conditions. Any additional or different terms or conditions set forth
in the Purchaser’s order or other communications are objected to by Seller and shall not be effective or binding unless assented to in
writing by an authorized representative of Seller.
Quote
Quote number: 2270179
Date: 04/23/2021
19/19
PAYMENT TERMS
Unless expressly agreed to in writing on a specific contract or order, our standard payment terms are:
For orders under $100,000 the payment terms shall be Net 30 days from date of shipment.
For orders over $100,000 or with lead times greater than six months the following terms shall apply:
1. Domestic Shipments
In those cases where progress payments are required, all work on the order will cease if payment is not received in accordance
with the payment schedule.
2. Export Shipments
All export shipments are subject to purchaser arranging for an irrevocable letter of credit in favor of Atlas Copco Compressors
LLC, from a recognized American bank.
Should the order fall in a category that requires progress payments, the letter of credit shall be arranged to release payment in
accordance with the agreed payment schedule.
3. Payment Retention
Payment retention will not be allowed. An irrevocable bank letter of credit will be furnished at Atlas Copco’s expense in lieu of
retention.
4. Credit Approval
All terms are subject to credit approval by Atlas Copco Compressors LLC.
CANCELLATION SCHEDULE
Definitions:
Standard Stocked Equipment - equipment as shown in the current catalog and available for shipment from the US Distribution
Center.
Standard Non-Stocked Equipment - equipment as shown in the current catalog but not currently stocked at the US Distribution
Center.
Engineered Equipment - equipment requiring customized features not shown in the current catalog.