The document provides specifications for a borosilicate glass block that is 4 x 2 x 1 mm in size. It states that the material is borosilicate glass with a finish of none. It also lists requirements such as deburring all sharp edges, cleaning and degreasing parts prior to shipment, and bagging and tagging parts with the AVO part number and current revision marked on the outside of the bag. The completed part will also be RoHS 3 (EU 2015/863) compliant and require certification on the certificate of conformance.
The document provides specifications for a borosilicate glass block that is 4 x 2 x 1 mm in size. It states that the material is borosilicate glass with a finish of none. It also lists requirements such as deburring all sharp edges, cleaning and degreasing parts prior to shipment, and bagging and tagging parts with the AVO part number and current revision marked on the outside of the bag. The completed part will also be RoHS 3 (EU 2015/863) compliant and require certification on the certificate of conformance.
The document provides specifications for a borosilicate glass block that is 4 x 2 x 1 mm in size. It states that the material is borosilicate glass with a finish of none. It also lists requirements such as deburring all sharp edges, cleaning and degreasing parts prior to shipment, and bagging and tagging parts with the AVO part number and current revision marked on the outside of the bag. The completed part will also be RoHS 3 (EU 2015/863) compliant and require certification on the certificate of conformance.
1. MATERIAL: BOROSILICATE REV. DESCRIPTION DATE INITIATOR
2. FINISH: NONE ABC 0 INITIAL RELEASE 6/1/2021 3. BREAK AND DEBURR ALL SHARP EDGES 4. CLEAN AND DEGREASE PARTS PRIOR TO SHIPMENT 5. BAG AND TAG PARTS WITH AVO PART NUMBER AND CURRENT REVISION MARKED ON OUTSIDE OF BAG 6. COMPLETED PART WILL BE RoHS 3 (EU 2015/863) COMPLIANT, CERTIFICATION REQUIRED ON C OF C
UNLESS OTHERWISE SPECIFIED: NAME DATE
DIMENSIONS ARE IN mm DRAWN ABC 5/27/2022 GLASS BLOCK - 4 x 2 x 1 mm TOLERANCES: 1 PLACE 0.1 [.004] CHECKED: ANGULAR .5 2 PLACES 0.05 [.002] 3 PLACES 0.025 [.001] BREAK ALL SHARP CORNERS & REMOVE ALL BURRS Lumotive Inc. INTERPRET GEOMETRIC TOLERANCING PER: 4104 148th Ave NE, Redmond, WA 98052 ANSI Y14.5M PROPRIETARY AND CONFIDENTIAL APPROVED: MATERIAL THE INFORMATION CONTAINED IN THIS SIZE DWG. NO. REV BOROSILICATE DRAWING IS THE PROPERTY OF LUMOTIVE INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LUMOTIVE INC. IS PROHIBITED. FINISH NONE THaslett , 6/2/2021, 1:42:42 PM A 120404 0 DO NOT SCALE DRAWING SCALE: 20:1 SHEET 1 OF 1