Professional Documents
Culture Documents
Compatability Matrix
HOME
Read me
Worksheet Contents
Rev page Revision history
Read me This page explains you how to use this file
Definition This page expains about Stenoscop and Stenoscop Plus.
This page provides all the required actions needs to be taken at the time of replacing certain
Actions
FRU's as mentioned.
Steno & Steno Plus
Comp Matrix This page provides the compatibility information.
SW & FW This page provides the information about the various software and firmware which have
Comp Matrix been used.
DR4_MD10_MDn This page provides the information about the DR4, MD10 and MDn memory compatibility.
16 images
STENOSCOP WITH DR7 MEMORYor MDn ( Not validated ) when upgraded STENOSCOP Plus 100 images
200 images
WITH MDN MEMORY
STENOSCOP WITH MDA MEMORY 200images - IDE 5000 images Hard disk IDE
2000images/4fps - IDE STENOSCOP Plus WTH MDA 10000 images/8fps Hard disk IDE
OLD (75 MHz) OR NEW PC ( 100 MHz) 5000images/8fps - SCSI ( OLD PC) 20000 images/30fps Hard disk WSCSI
MEMORY AND NEW PC
5000images/8fps - IDE ( NEW PC) ( 100 MHz)
CAUTION: This MDA memory is used with a PC board and a CAUTION: This MDA memory is used with the new PC and a MIDAS
board QE5V/QE3.3V
MIDAS board QE Ref: 861427G525 replaced by Ref:2249276 or 2259378 Ref: 2249277 / 2259378
The Hard disk IDE 6,4Gb for Pegase Ref: 2258235 The Hard disk IDE 6,4GB for Stenoscop Plus Ref:2255260
The Hard disk Wide SCSI 4.56GB for Stenoscop Plus Ref:2255261
DR4 Memory
DR7 Memory
This memory can only be connected has 7images storage system through DSM interface
This memory has no image quality measurement facility
Incase of obsolecent or upgrad the DR7 will be replaced by the MD16 memory ( Validation not done )
MD10 Memory
This memory can only be connected has 10images storage system through DSM interface
This memory has Key board option connection
This memory has no image quality measurement facility
Incase of obsolecent or upgrad the MD10 will be replaced by the MD16 memory
MDA Memory
MDn Memory
This memory is used as variable storage capacity depending of the flash memory installed
The different storage option are 6images ; 16 images ; 112 images or 208 images
The interface with the stenoscop is the same as DSM
This memory has no image quality measurement facility
This memory has the same function as MDA memory for Stensocp
HOW TO RECONISE MDA (of STENOSCOP) AND MDA PLUS ( of STENOSCOP PLUS)
Comparision
For - Global Price Book Structure: UPGRADES & ADD-ON -For STENOSCOP 6000/9000 CCD with DR4/MD10 or MDA
and for STENOSCOP + 6000/9000 CCD with MDn / MDA Plus
globe/globepro/tccdocs/_global price book diagrams/Mobile c-arm/13996DBC.ppt
P-2 Action for PC The BIOS setting of Fixed disk parameters having IDE translastion mode has to be changed from Auto to Extended CHS .
FE Instruction not
861420P015 Yes
available.
As the 68 to 50 way convertor comes only with Backplane PC where there is a SCSI controller in build in the PC. Hence for this
P-3 Action for PC FRU PC BT -948 SCSI controller card is required with the corresponding SCSI driver present in a SCSI disk . The way to solve the
problem is connecting a IDE disk of 3.2 GB or greater in place of the SCSI disk for the 8 fps configuration.
P-4 Action for PC The Shorter cable cannot be used in Backplane PC. Hence the longer MIDAS cables send with the PC has to be used for assembly. 2240035
The SCSI disk should be replaced by a MDA IDE disk of capacity 3.2GB or greater.The SCSI controller Board should be removed
P-5 Action for PC from the system and scrapped along with the cable. This is because there is a SCSI controller in build in the System.
2240037
2240042 Yes
If the SCSI disk is used with Valuepro PC and BT 948 SCSI controller board , then the SCSI disk should be replaced by a MDA IDE
P-6 Action for PC disk of capacity 3.2GB or greater.The SCSI controller Board should be removed from the system and scrapped along with the cable.
P-7 Action for PC In the PC BIOS, PCI options the SCSI controller has to be enabled
2240035
P-8 Action for PC For Systems with two SCSI drives , the two RAM modules located in the faulty PC has to be replaced in to the new FRU PC.
Refer to Steno & Steno Plus Comp Matrix sheet
Nil 861427G525,
M-1 Action for Midas The respective firmware that came along with floppy has to be loaded 2240044 2240550 2249276, No
2259384 2249277, 2259378
M-2 Action for Midas Has got potential risk of problem as per F-1, should be replaced if problem detected. N/A For Information only No
The SCSI disk should be replaced by a MDA IDE disk of capacity 3.2GB or greater.The SCSI controller Board should be removed
S-1 Action for SCSI from the system and scrapped along with the cable. Depending on the new IDE hard disk look into IDE hard disk chart for further up
The SCSI disk along with cable should be replaced by a MDA IDE disk of capacity 3.2GB or greater. Depending on the new IDE 2246221 2258235 Yes
S-2 Action for SCSI hard disk look into IDE hard disk chart for further upgradation. The PC BIOS should be change to SCSI controller DISABLED .
The component should be removed from the system. This is because the SCSI disk is going to be replaced by a IDE disk of 3.2 GB
S-3 Action for SCSI or greater. This has the 5000 images / 8fps capability
D-1 Action for IDE The BIOS has to upgraded from 1.00.03 to 1.00.06 FRU # ? ,
? Nil
833074G515, Yes
2246221
2258235
D-2 Action for IDE The BIOS setting of Fixed disk parameters having IDE translastion mode has to be changed from Auto to Extended CHS .
V-1 Action for VGA OK for MDA memory but NOT suitable for MDA+ hence NOT TO BE USED. N/A For Information only No
M-1 Action for Memory Order for FRU # 2259782 only if FRU # 2175685 is not available. 2259782
DR4_MD10_MDn
Order for FRU # 2259783 ( when the existing configuration of the MD10 does not have Keyboard ) or FRU # 2259784 2240043 No
2259783
M-2 Action for Memory ( when the existing configuration of the MD10 do have keyboard ) but in both the cases only if FRU # 2175688 is not 2259784
available.
FRU )
FRU )
FRU )
2255260
2258235
# 2247347
# 2246219
Compatibility
833075G515
# 833074G515
1.00.03) FRU # ?
Matrix
Backplane PC P5000HX2 (
P-1,
ValuePro PC Advanced ZE ( BIOS
3
1
Y
Y
Y
?
?
?
?
?
Y
Y
Y
Y
Steno
P-1
1.00.03) FRU # - ?
P-
P-1, P-2
P-1, P-2
P-
ValuePro PC Advanced ZE ( BIOS
Y
Y
Y
?
?
?
?
?
?
?
Y
Y
Y
Y
Steno
P-3
P-2
P-2
1.00.06) - FRU # 861420P015
-
-
-
-
-
-
-
Y
Y
Y
?
?
?
?
Y
Y
Y
Steno
FRU # 2240035
PC
-
-
-
-
-
-
-
Y
Y
Y
Y
Steno
P-5
P-5
P-6
P-5
P-5
P-5
FRU # 2240037
-
-
-
-
-
-
-
-
-
Y
Y
Y
Y
Steno Plus
P-7
FRU # 2240035
-
-
-
-
-
-
-
-
-
?
?
Y
Y
Steno 850 seagate ST3850A FRU # ?
-
-
-
-
-
-
-
-
-
?
?
Y
Y
Steno 1.2GB caviar 21200 FRU # ?
-
-
-
-
-
-
-
-
-
?
?
Y
Y
-
-
-
-
-
-
-
-
-
?
?
Y
Steno 2.5 GB caviar AC22500 FRU # ?
D-1
-
-
-
-
-
-
-
-
-
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
D-1
-
-
-
-
-
-
-
-
-
Y
Y
Y
Y
Y
Y
Y
Y
Steno
D-2
-
-
-
-
-
-
-
-
-
Y
Y
Y
Y
Y
Y
Y
Y
Steno
D-2
2258235
IDE HARD DISK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Steno Plus
G-1
G-1
# 2247347
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Y
Y
Y
Steno Plus
2255260
S-3
S-3
S-3
S-3
S-3
S-3
S-3
-
-
-
-
-
-
-
S-3
S-3
S-3
S-3
S-3
S-3
S-3
-
-
-
-
-
-
-
S-3
S-3
S-3
S-3
S-3
S-3
S-3
Steno
S-2
S-1
S-1
S-3
S-3
S-3
S-3
S-3
S-3
S-3
833075G515
SCSI HARD DISK
Y
Y
Y
Steno Plus
FRU # 2255261
?
?
?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno
FRU # 861427G525
FRU # 2240552
?
?
?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno
MIDAS
Y
Y
Y
Y
Steno Plus
F/W 5.06, 5.07)- FRU # 2249277
?
?
?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Both
2259378
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
VGA BOARD
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Floppy Drive
Y
ETHERNET BOARD
Y
FRU)
FRU )
2249277
2249276
VGA BOARD
Floppy Drive
Compatibility
ETHERNET BOARD
Matrix
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
F-1
1.00.03) FRU # - ?
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
F-1
1.00.06) - FRU # 861420P015
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
F-1
P-4
FRU # 2240035
PC
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
F-1
FRU # 2240037
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno Plus
P-8
M-2
FRU # 2240035
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno 850 seagate ST3850A FRU # ?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno 1.2GB caviar 21200 FRU # ?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno 2.1 GB caviar AC12100 FRU # ?
?
?
?
?
Y
Y
Y
Y
Y
Y
Y
Steno 2.5 GB caviar AC22500 FRU # ?
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
833074G515 / (2246219- Obsolete)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
833074G515 / (2246219- Obsolete)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno
2258235
IDE HARD DISK
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno Plus
# 2247347
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Steno Plus
2255260
Steno
833075G515
SCSI HARD DISK
Steno Plus
FRU # 2255261
Steno
M-1
M-1
M-1
M-1
FRU # 861427G525
FRU # 2240552
Steno
MIDAS
M-1
M-1
M-1
M-1
Steno Plus
M-1
M-1
M-1
Both
M-1
M-1
M-1
M-1
M-1
M-1
2259378
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
VGA BOARD
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Floppy Drive
Y
ETHERNET BOARD
Y
MIDAS (Having QB 5V
chip) PCB – obsolete
From the Viewer screen go to System Setup Permanent data , in the message window it appears
MDA
MIDAS (Having QE 5 V
as : Software revision
chip with pull up resistor)
: 7.16 Firm revision
PCB
: 5.06
MIDAS (Having QE 3.3 V
chip ) PCB
SODA
OS The NT version appears during boot-up sequence of the MDA.
Autorun Information only.
MDn
MDn Software The S/W version can be verified using Laptop PC see MDn configuration procedure under D/R 76.
!
IR receiver parallel for DR4
Matrix for
Compatibility
Stenoscop
on
Configurati
Field
Present
!
MD10 Memory Parallel -
DR4 Memory Parallel -
FRU # 832466G035
IR Remote Control
IR Remote Control
- FRU # 2175687
"
FRU # 2175685
FRU # 2175688
MD10
DR 4
DR 4 DR 4
DR4 Memory Parallel - DR4 Memory Parallel -
Y M-1
FRU # 2175685 FRU # 2175685
IR receiver parallel for DR4 - IR receiver parallel for
Y
FRU # 2175687 DR4 - FRU # 2175687
IR Remote Control IR Remote Control
Y
FRU # 832466G025 FRU # 832466G025
MD10 MD10
MD10 Memory Parallel - MD10 Memory Parallel -
Y M-2 M-2
FRU # 2175688 FRU # 2175688
p
IR receiver parallel for MD10 MD10 - FRU #
Y
- FRU # 2175690 2175690
IR Remote Control IR Remote Control
Y
FRU # 832466G035 FRU # 832466G035
MDn MDn
# #
Y
# #
Y
# #
Y
#
Y
# $
Y
" #
#
Y
# $
Y
#
Y
&'
Y
""
#
#
#
#
#
Configuratio
Compatibility
$
$
#
Matrix for
%&&'
$
#
Stenoscop
%&
Present
""
Field
PLUS
"
MDn
n