Professional Documents
Culture Documents
䊏 FEATURES
● Remote Ranging And Monitoring Functions
Ranges can be remotely set and monitored through
HART® Communicator.
● On-line Communication
Output signal and communication signal do not
interfere making on-line communication possible.
● Zero Adjustment Function
Zero point easily adjusted at external zero adjust-
ment.
● Self-Diagnostic
Pressure input outside of range limit, excessive
ambient temperature incorrect span setting etc. can Use the following formula to determine cable length for
be diagnosed through HART® Communicator. a specific application:
● Wide Transmitter Offering
DPharp EJA Series with HART® Communication is 65 ⫻ 106 (Cf ⫹ 10,000)
L= ⫺
applicable to the entire DPharp EJA series. (R ⫻ C) C
F01E.EPS
;;;;
Write Enable/Disable switch C = cable capacitance in pF/ft, or pF/m.
Cf = Maximum shunt capacitance of field devices
Conditions of Communication Line:
in pF.
;;;;
Supply Voltage;
General Use & Explosion proof Type 600
16.4 to 42 V DC
;;;;
Intrinsically safe Type E–10.5
External R=
0.0236
Refer to each General Specification load Communication
;;;;
sheet. resistance applicable
Load resistance; range
See figure 1. 250
Minimum cable size;
24 A WG, (0.51 mm diameter). R (⍀)
Cable type;
Single pair shielded or multiple pair with overall
shield. 10.5 16.4 24.7 42
Maximum twisted-pair length; Power supply voltage E (V DC)
F02E.EPS
10,000 ft (3,048 m).
Maximum multiple twisted-pair length: Figure 1. Relationship Between Power Supply
5,000 ft (1,524 m). Voltage and External Load Resistance
■ OPTIONAL SPECIFICATIONS
Item Description Code
Data Configuration Description into “Descriptor” parameter of HART protocol (max. 16 characters) CA
T02E.EPS
All Rights Reserved. Copyright © 1995, Yokogawa Electric Corporation GS 01C22T01-00E Apr. 01, 2003-00