Professional Documents
Culture Documents
LTE Radio Access, Rel. LTE 19B, Operating Documentation, Issue 02 (HTML) > Nokia AirScale BTS
> Nokia AirScale BTS Descriptions > Nokia AirScale Radio Description > Nokia AirScale Macro FDD-
LTE Radios > Descriptions of RF modules
Functional description
Table: ARGA functional specification
Property Value
localhost:8787/informationbrowser/index.jsp 1/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Interfaces
localhost:8787/informationbrowser/index.jsp 2/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Grounding 1 2 x M5 screw -
*EMHH Flexi 3U Casing and High Covers F&B (473187A) are required when connecting either
4.3-10 straight antenna cables or RET cables. For details, see Flexi BTS Optional Items
Description.
localhost:8787/informationbrowser/index.jsp 3/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Electrical specifications
Table: ARGA electrical specifications
Property Value
localhost:8787/informationbrowser/index.jsp 4/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Property Value
-57.0 V DC to -60.0 V DC
Power consumption
Typical power consumption [W] for 48VDC input, at 25°C, representative of typical product
performance under the same conditions (HW variant, SW version, configuration, environment,
and so on) with +/- 10% margin. Average = (6h low hour load, 10h medium hour load and 8h
busy hour load) / 24h
localhost:8787/informationbrowser/index.jsp 5/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Power back-off
Table: Recommended ARGA power back-off in 256 QAM mode
80 0.6 1.2
≤60 0 0.6
Note:
The maximum power reduction ( dlCellPwrRed ) value is 20 dB. High backoff values
may cause radio outages.
Property Value
localhost:8787/informationbrowser/index.jsp 6/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Property Value
IP rating IP65
localhost:8787/informationbrowser/index.jsp 7/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
Environmental specifications
Table: ARGA environmental specifications
Property Value
WARNING!
WARNING! Risk of electric shock.
Before turning RF power on, RF ports have to be terminated by nominal 50 Ω load (for
example, feeder with antenna). However, if these conditions are not met, the plastic caps
that are delivered within the unused RF ports should remain in place. The plastic caps
isolate RF port from the environment, and thus provide electric shock security in case RF
power is accidentally on.
Note:
The minimum start-up voltage is -40.5 V DC. If the input voltage is below/beyond the
extended limits, the unit might shut down.
localhost:8787/informationbrowser/index.jsp 9/10
6/11/2021 Nokia AirScale RFM 6T6R B1 480 W (ARGA)
localhost:8787/informationbrowser/index.jsp 10/10