Professional Documents
Culture Documents
Features:
• 1 Phase Neutral Displacement
Relay.
• IDMT Curve.
General:
The ADR112E is member of Ashida Numerical Relay family (Aditya Series) design to meet demand of
low and medium switchgear control. The ADR112E is basically 1 phase neutral voltage protection with
IDMT & Definite time. The ADR112E continuously monitors the phase voltage, through PT connections.
The high-speed micro-controller samples this voltage sine wave through a 12 bit A/D converter. The
micro-controller performs powerful Digital Algorithms to find out Amplitude of voltage signal, and then
this value is use for protection and metering function. All measurement is tuned to fundamental
frequency and reject all higher harmonics present in electric supply. Each phase voltage is also
displayed on 16 x 2 LCD display for metering. The Relay is having main three functions 1) Protection 2)
Self-Supervision 3) Measurement.
Note: Due to our policy to upgrade our products constantly, we reserve the right to supply products which may vary
slightly from that indicated above.
1. Protection Functions:
The ADR112E gives maximum benefit / cost ratio. The ADR112E gives all the advantage of
numerical relay at affordable cost. Following is summery of different protection functions provided
by relay.
ANSI IEC Protection Functions
59nd - Neutral Unbalance Voltage Protection.
2. Supervision Function:
2.1 Self-supervision:
The continuously keeping track on its internal hardware and the movement it detect any failure of
any component, it give message on LCD display, This feature is very useful to give pre information
to avoid any mall - operation. In such situation it use some default setting and remain in protection
mode.
Note: Due to our policy to upgrade our products constantly, we reserve the right to supply products which may vary
slightly from that indicated above.
4. Ordering Information:
The relay is available with nos. of different option. The option is specified by model no. It is user
responsibility to specify correct model no. while ordering.
W hile O r der ing Spec if y the f ollowing Inf or m ation f or ADR112E Relay
Definition of Model No for ADR112A Relay
AM XXX – XX – XX – XX – XX – XX – XX
XX = CT. XX = PT.
00 Not Applicable 02 110VAC
XX = Communication
Protocol
XX = Cabinet Size XX = Cabinet Type 00 Not Applicable
01 CSA (138 X 138 mm) 01 Non Draw out 02 IEC103
O rdering in f o rmat io n :
ADR112E – AM – XXX – XX – XX – XX – XX – XX – XX
Av ailable M o d els:
• ADR112E– AM– 110– 01– 01– 08– 00– 02– 00. (Non draw out cabinet)
• ADR112E– AM– 110– 01– 02– 08– 00– 02– 00. (Draw out cabinet)
• ADR212E– AM– 210– 01– 01– 08– 00– 02– 02. (Non draw out cabinet)
• ADR212E– AM– 210– 01– 02– 08– 00– 02– 02. (Draw out cabinet)
Note: Due to our policy to upgrade our products constantly, we reserve the right to supply products which may vary
slightly from that indicated above.
Technical Specifications:
Note: Due to our policy to upgrade our products constantly, we reserve the right to supply products which may vary
slightly from that indicated above.
Note: Due to our policy to upgrade our products constantly, we reserve the right to supply products which may vary
slightly from that indicated above.