M-DRO* Technical Information
Ce ste: oso-vse.fo-ox
+The interface connects up to four
encoders using the USB port on your PC.
The user-friendly software provides a simple to
use readout on the computer screen.
+Most of the decoding is handled by the interface, this
reduces the computer specification required. Any Windows based hardware running XP
upwards would be suitable.
«Linear or rotary quadrature encoders can be connected on any axis. The encoder
resolution can be set along with the user defined display resolution
Designed and built in the UK.
ry
ty
<=
Fy
2
&
1°)
a
7
]
B
b
8
C
[a
rs]
ih
igi
Cw Ca)
Specifica.___
‘Specifications
Axis input 4
Encoder near
Display Colour ‘Selectable per axis - red, orange, blue, green, grey or black
Encoder types Linear and Rotary
Encoder input ‘Sv TTL 90° quadrature phase difference
Linear resolution settings User defined - Imm to 0. 00001mm
Storage temperature 10°C ~ 455°C
Operating temperature O-C~ #85°C
Relative humidity 20% to 85% Non-condensing
Operating voltage 5 volt (powered by USB port)
Weight 1KgM-DRO*
Functions
Technical Information
mmiinch
Absolute/incremental
‘Trigonometric calculator
Angular axis configuration
Error compensation
Radlus/Diameter display
Centre find
Axis summing
Datum Entry
Zero preset
Setup Options
‘Standard Functions
Metricimperial display. Selectable for each per axis
Display position tothe user-defined datum (absolute)
Display new position relative to the previous position (incremental)
‘Standard functions including square root and trigonometric,
Linear or Angular display on any axis
Linear error compensation
Radius mode will display physical travel. Diameter mode will
display work piece diameter
Calculates half the distance between two selected points
Display the combined travel of carriage and compound slide
Enter a user defined offset value
Auser preset value for axis zero key
‘Channel Stings
Select Channa
‘Channel Type
ser Reson:
Encoder Patty.
Compensation Type
Linear Compensation [0
Irtegiate Chara
Decimal Peits
Channel Colour
Unit of Messument
zero Value:
Diemeter Display
Machine Stings
chine Type
Catalatr Dacia
‘Setup Options
‘Axis selection for setup -X, ¥, Zor A
Input type - linear, rotary, disable
Resolution presets - 80, 25, 10, 5, tum or user
set value
Encoder count direction - negative, positive
Linear compensation
Combine axis travel - disable, X,Y, Zor A
‘Axis display resolution
Display colour - red, orange, blue, aren, grey or
black
‘Axis display units - metric, imperial
‘Axis zero preset value - 0 or user defined
Radius or Diameter display (lathe mode only)
Machine type - mill or lathe
Calculator decimal places - 5, 4, or 3
Licence code - located on interface unit
>
Zo™mo om>
Ro-Tonm
zernxe-
ze
ital Readout PC Interface
E)
Cw Ca)M-DRO* Technical Information
Dimensions
Output Signal
atl IL
BL
Zz ULL
ry
ty
<=
Fy
2
&
1°)
a
7
]
B
b
8
C
[a
rs]
ih
rr
Cw Ca)
itted with 9 pin female D type connector for encoder input.
For encoder compatibly please check compatibility chart datasheet.
Pint Pind Pin3 | Pind | PinS | Piné | Pin? | Pin8 Pind
Signal NIC ov NIC Screen NIC A +5v B 2]