Professional Documents
Culture Documents
URL Launcher is working without URL Address input for install from USB option.
May 11, 2020 A-MDC8GDSP-1231 Languages are updated for some parts.
Issue fixed - Power On sequence is not working correctly in Secured Protocol mode with MagicInfo source.
Issue fixed - Customized domail can be used for sender mail address on gmail.com
Issue fixed - Wrong PIN number set when loading connection in somecases.
Issue fixed - Power On (WOL) is not working sometimes by wrong MAC address using.
Add new function, "Play via". It has two options, Magicinfo and URL Launcher.
Issue fixed - Picture size (21:9) was shown as "----" on the device list column. Now it is revised.
Issue fixed - Software update result shows fail message on some devices.
Issue fixed - Wrong command was sent when Input source is changed to Display Port 2.
Issue fixed - The start position of UMDC main window has not been saved.
New models are supported (OMF / OHF)
Change the Device fault option display (Previous : 0, 1 or 2 -> None / Normal / Error)
└ These TIZEN OS device supports software update. (BEM format file only)
Display software version of connected devices in grid. (Tool > Edit > Software Version check)
Add the defect filter as [VideoWall] (user can find automatically [VideoWall] model through Defect.)
July 21, 2015 A-MDC8GDSP-1180
Update multi languages for some parts of Unified MDC.
"Auto Power Off" for the Eco solution is refreshingly added in System menu.
1. Run the MDC UNIFIED program and connect the devices which are necessary to be updated via RJ45(Ethernet).
2. Select only 1 device which is to be updated in All Device List and click Software Update icon in Tool tab.
3. Then, MDC UNIFIED will find all devices which have same firmware version name with selected one from All Device List.
4. Now, You can see the popup window with some devices.
5. Select what you want to update, and click Browse to find the correct file .
6. Click Start.
※ If you select a device more than 5, it is that 5 models are updated for the first time in advance.
And the other remaining devices will be successively updated with 5 at a time.
※ The preparation for correct file when UDE-A/B/C series, OH85F and UH46F5.
a. Get the main binary file.
b. Unzip and get *.bin file. Then, change the file format to *.msd.
c. Make a folder named 'image', and move *.msd file into the folder.
d. Make a 'info.txt' file and open it to edit.
e. Write as 'A-AAAAAAA xxxx.x' (A-AAAAAAA should be same as software version name of device)