Professional Documents
Culture Documents
01x Quick Reference
01x Quick Reference
* In these explanations, normal page references are to the 01X Owner’s Manual; those indicated by “Guide” are to the 01X Installation Guide.
For more information, make sure to refer to the “Overview of the 01X” on page 25 of the Owner’s Manual, as well as the block diagram at the end of the manual.
Quick Reference Audio Playback from the Computer/Sequencer (DAW)
Stereo Playback (two-channel mix) Playback of Individual Channels
This setup lets you play back the main stereo output from the software mixer (DAW) In this setup, each audio channel on the software mixer (DAW) is sent to the corresponding
from the 01X. channel of the 01X.
Effect 1, 2
STI1, 2 1 Assign the audio channels on the
SEND3, 4 sequencer to the channels of
Pan the mLAN Audio Driver, from
Recorder The actual output settings differ depending on the sequencer (DAW).
EQ, Dyn, Vol (Digital connection) channel 1 in order. (p. 70)
For example:
EQ, Dyn, Vol • Each mixer channel on the sequencer is assignable to one of the mLAN channels.
Mix
MIDI Mic / Guitar EQ, Dyn, Vol • Each mixer channel on the sequencer is assigned to a bus, and the bus is
assignable to one of the mLAN channels.
Synthesizer EQ, Dyn, Vol Monitor