Professional Documents
Culture Documents
A
作成承認印 配布許可印
サービス
計画課
M
VBA29001 logo_Q0750
100617_Gdesign_ito
REPAIR MANUAL
Contents
Disassembly.........................................................................................................................D1
Warning........................................................................................................................................................D1
1. External Appearance..............................................................................................................................D2
Battery cover unit...................................................................................................................................D2
External part...........................................................................................................................................D2
Bottom cover unit...................................................................................................................................D3
2. Rear Cover...............................................................................................................................................D4
Rear cover unit.......................................................................................................................................D4
TFT monitor window.............................................................................................................................D5
Rear FPC unit.........................................................................................................................................D5
Rear button.............................................................................................................................................D7
Selector lock lever..................................................................................................................................D7
TFT monitor...........................................................................................................................................D8
LV lever..................................................................................................................................................D8
3. TOGO PCB/Image Sensor.......................................................................................................................D9
SD cover unit..........................................................................................................................................D9
Discharge of main condenser.................................................................................................................D9
Front cover unit....................................................................................................................................D10
Shield plate...........................................................................................................................................D11
TOGO PCB unit...................................................................................................................................D12
Image sensor unit.................................................................................................................................D13
4. Top Cover...............................................................................................................................................D15
I/F cover unit........................................................................................................................................D15
Grip cover unit.....................................................................................................................................D16
Top cover unit.......................................................................................................................................D16
LCD window........................................................................................................................................D18
SB PCB unit.........................................................................................................................................D19
Command dial unit...............................................................................................................................D20
AF assist lamp unit...............................................................................................................................D21
Top LCD unit.......................................................................................................................................D21
Power dial.............................................................................................................................................D22
Shoe base..............................................................................................................................................D24
SB lower case unit................................................................................................................................D25
Top cover FPC unit..............................................................................................................................D28
Release mode dial lock button.............................................................................................................D30
Eyelet....................................................................................................................................................D30
5. Separation of Front Body from Rear Body............................................................................................D31
6. Rear Body..............................................................................................................................................D33
IF PCB unit..........................................................................................................................................D33
- D7000 -
NICS
VBA29001-R.3814.A
Relay-PCB............................................................................................................................................D35
DCDC ISC PCB unit...........................................................................................................................D36
Connector PCB unit.............................................................................................................................D38
PD PCB unit.........................................................................................................................................D40
GND plate/Shield plate........................................................................................................................D40
Bottom base unit..................................................................................................................................D41
Main condenser unit.............................................................................................................................D42
Battery contact......................................................................................................................................D43
7. Front Body.............................................................................................................................................D43
Shutter unit...........................................................................................................................................D43
AF sensor unit......................................................................................................................................D45
8. Separation of Prism Box from Front Body............................................................................................D46
Aperture control unit............................................................................................................................D47
Connection-FPC...................................................................................................................................D48
AF-M lever unit....................................................................................................................................D48
MD PCB unit........................................................................................................................................D49
Mirror driving unit...............................................................................................................................D50
Horizontal lever/Vertical lever.............................................................................................................D50
AF motor unit.......................................................................................................................................D52
Bayonet................................................................................................................................................D53
Apertrue couping ring unit...................................................................................................................D54
Lens contact FPC unit..........................................................................................................................D55
Lens release button unit........................................................................................................................D57
Mirror driving unit...............................................................................................................................D57
Mirror box unit.....................................................................................................................................D58
9. Prixm Box..............................................................................................................................................D59
Metering FPC unit................................................................................................................................D59
Penta FPC unit......................................................................................................................................D59
LCD unit...............................................................................................................................................D60
Screen BOX unit..................................................................................................................................D60
Eyepiece block unit..............................................................................................................................D61
Assembly/Adjustment........................................................................................................A1
1. Prism Box................................................................................................................................................A1
Eyepiece block unit................................................................................................................................A1
Penta prism.............................................................................................................................................A1
Screen BOX unit....................................................................................................................................A3
LCD unit.................................................................................................................................................A3
Penta FPC unit........................................................................................................................................A4
Metering FPC unit..................................................................................................................................A5
2. Front Body...............................................................................................................................................A6
Mirror box unit.......................................................................................................................................A6
- D7000 -
NICS
VBA29001-R.3814.A
Mirror driving unit.................................................................................................................................A7
Lens release button unit..........................................................................................................................A8
Lens contact FPC unit............................................................................................................................A9
Aperture coupling ring unit..................................................................................................................A10
Bayonet................................................................................................................................................A12
Adjustment of aperture coupling ring..................................................................................................A13
AF motor unit.......................................................................................................................................A14
Horizontal lever/Vertical lever.............................................................................................................A15
Mirror driving unit...............................................................................................................................A17
MD PCB unit........................................................................................................................................A18
AF-M lever unit....................................................................................................................................A19
Connection-FPC...................................................................................................................................A19
Aperture control unit............................................................................................................................A20
Height adjustment of AF coupling shaft..............................................................................................A21
Height adjustment of aperture lever.....................................................................................................A21
3. Mounting of Prism Box on Front Body.................................................................................................A22
AF sensor unit......................................................................................................................................A23
Adjustment of AF-sensor mounting base.............................................................................................A24
Adjustment of main mirror and sub-mirror..........................................................................................A25
Shutter unit...........................................................................................................................................A27
X-delay adjustment value.....................................................................................................................A28
4. Rear Body..............................................................................................................................................A29
Battery contact......................................................................................................................................A29
Main condenser unit.............................................................................................................................A30
Bottom base unit..................................................................................................................................A31
Shield plate/GND plate........................................................................................................................A32
PD PCB unit.........................................................................................................................................A33
Connector PCB unit.............................................................................................................................A34
DCDC ISC PCB unit............................................................................................................................A36
Relay-PCB............................................................................................................................................A38
IF PCB unit..........................................................................................................................................A39
5. Mounting of Front Body on Rear Body.................................................................................................A42
Inspection and adjustment of flange-back (body-back).......................................................................A44
6. Top Cover...............................................................................................................................................A45
Eyelet....................................................................................................................................................A45
Release mode dial lock button.............................................................................................................A45
Drip-proof sponge................................................................................................................................A46
Top cover FPC unit..............................................................................................................................A48
SB lower case unit................................................................................................................................A50
Shoe base..............................................................................................................................................A55
Power dial.............................................................................................................................................A55
- D7000 -
NICS
VBA29001-R.3814.A
Top LCD unit.......................................................................................................................................A57
AF assist lamp unit...............................................................................................................................A58
Command dial unit...............................................................................................................................A59
SB PCB unit.........................................................................................................................................A59
LCD window........................................................................................................................................A61
Top cover unit.......................................................................................................................................A61
Grip cover unit.....................................................................................................................................A63
I/F cover unit........................................................................................................................................A64
7. Rear Cover.............................................................................................................................................A65
LV lever................................................................................................................................................A65
TFT monitor.........................................................................................................................................A65
Selector lock lever................................................................................................................................A66
Rear button...........................................................................................................................................A66
Rear FPC unit.......................................................................................................................................A67
TFT monitor window...........................................................................................................................A68
8. Image Sensor/TOGO PCB.....................................................................................................................A69
Image sensor unit.................................................................................................................................A69
TOGO PCB unit...................................................................................................................................A70
How to connect camera and PC...........................................................................................................A72
How to install inspection and adjustment software for camera body (except imaging)......................A72
Inspection and adjustment for AE-CCD positioning...........................................................................A72
Inspection and adjustment of parallax..................................................................................................A76
Shield plate...........................................................................................................................................A84
9. External Appearance..............................................................................................................................A85
Front cover unit....................................................................................................................................A85
SD cover unit........................................................................................................................................A86
Rear cover unit.....................................................................................................................................A86
Necessary inspection and adjustment of camara body (except imaging) when parts are
replaced.............................................................................................................................A88
Firmware update........................................................................................................................................A88
Inspection and adjustment for AE accuracy...............................................................................................A88
X-delay adjustment....................................................................................................................................A89
Inspection and adjustment for AF accuracy...............................................................................................A90
Inspection and adjustment of X-position...................................................................................................A91
Confirmation of data..................................................................................................................................A94
Switch information monitor.......................................................................................................................A94
Inspection of sequence operation...............................................................................................................A94
Inspection of sequence error......................................................................................................................A94
CPU version, number of release times.......................................................................................................A94
Inspection of LCD light-up........................................................................................................................A94
Inspection of motor operation....................................................................................................................A94
- D7000 -
NICS
VBA29001-R.3814.A
Reset of compensated AF defocus amount................................................................................................A94
Rewriting of offset value of AF adj. lens...................................................................................................A94
Bottom cover unit......................................................................................................................................A95
External part...............................................................................................................................................A96
Battery cover unit.......................................................................................................................................A96
Charts..................................................................................................................................C1
Size of D7000 parallax chart........................................................................................................................ C1
Size of D7000 X-chart................................................................................................................................. C1
Size of D7000 Y-chart.................................................................................................................................. C2
D7000 Parallax chart.................................................................................................................................... C3
D7000 X-chart............................................................................................................................................. C4
D7000 Y-chart.............................................................................................................................................. C5
Gradient-sensor chart................................................................................................................................... C6
Inspection standards..........................................................................................................R1
Wiring..................................................................................................................................E1
Mounting Drawing.............................................................................................................E2
FUSE arrangement.............................................................................................................E3
Tool list.................................................................................................................................T4
Screw sheet.......................................................................................................................... S1
- D7000 -
NICS
VBA29001-R.3814.A
Disassembly
Warning
! WARNING
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
Caution:
① In disassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5) in order to
protect electric parts from static electricity.
② Before disassembling, be sure to remove batteries or AC power cord.
③ In disassembling, be sure to memorize the processing state of wires and FPCs, screws to be fixed and
their types, etc.
④ The low-pass filter of the image CCD PCB is easily damaged. Handle it very carefully..
ref. In this manual, the application of grease and adhesive is indicated by coloring.
CFD-409Z EDB0011 .
(grease: yellow/adhesive: red) or J-number..
Note:
① What are used in this manual may differ from the actual products in forms, etc.
- D1・D7000 -
NICS
VBA29001-R.3814.A
1. External Appearance
#B151
35°
External part
#69
#549
- D2・D7000 -
NICS
VBA29001-R.3814.A
Bottom cover unit
#620
#657×7
#476 #75
#711×2 #784
#786
#477
#475
#783
#785 #25
#810
- D3・D7000 -
NICS
VBA29001-R.3814.A
2. Rear Cover
#613×2
#614
#614×2
#B407 #675
- D4・D7000 -
NICS
VBA29001-R.3814.A
#402
#733
#833 [Blue]
[Red]
- D5・D7000 -
NICS
VBA29001-R.3814.A
= #675×14
#424 #422
#415
#B1016
- D6・D7000 -
NICS
VBA29001-R.3814.A
Rear button
#413 #421
#414
#427
#412 #428
#429
#671
#B420
#416
- D7・D7000 -
NICS
VBA29001-R.3814.A
TFT monitor
・ Take out the four screws (#672).
・ Remove the retainer plate (#406) and TFT monitor (#1049).
#672×4
#406
#1049
LV lever
・ Remove the spring (#486).
・ Remove the E-ring (#723).
#486 #723
#610×2
#485 #481
#1026
#483 #482
- D8・D7000 -
NICS
VBA29001-R.3814.A
3. TOGO PCB/Image Sensor
SD cover unit
・ Open the SD cover.
・ Take out the four screws (#614).
・ Remove the SD cover unit.
#B431 #440
#614×4
#436
SD cover unit
#435
#859
! WARNING
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
TA-0015 (8.5×17)
2KΩ/5W
- D9・D7000 -
NICS
VBA29001-R.3814.A
Front cover unit
・ Insert a lumirror sheet, etc, into the gap of the top cover pop-up section as below. Then raise the section by
sliding the sheet in the direction of the arrow.
Approx.
2cm
Approx.
4 cm
Lumirror sheet
#611×2
#389×2
Front cover unit #390×2
#B24RP
- D10・D7000 -
NICS
VBA29001-R.3814.A
Shield plate
#683
= Unhook ×2
#78
#617
= Unhook ×2
#79
#683
- D11・D7000 -
NICS
VBA29001-R.3814.A
TOGO PCB unit
Inside
Inside
- D12・D7000 -
NICS
VBA29001-R.3814.A
#B1001RP
#1041
- D13・D7000 -
NICS
VBA29001-R.3814.A
・ Peel off the three pieces of the tape [TA-0016 (8×8)], and remove the harness.
TA-0016 (8×8)×3
#678×3
#B20051
- D14・D7000 -
NICS
VBA29001-R.3814.A
4. Top Cover
#629×2
B28RP
#781
#779×2
#71
#731
#73
#84
#70
#603 #782
#603×2 #777
#778
#780
#1053
#66
- D15・D7000 -
NICS
VBA29001-R.3814.A
Grip cover unit
#622
Black
Red
- D16・D7000 -
NICS
VBA29001-R.3814.A
・ Take out the screw (#557).
・ Remove the diopter adjustment knob (#551) and roller (#550).
#557
#551
#550
#613 #613
- D17・D7000 -
NICS
VBA29001-R.3814.A
・ Take out the two screws (#623).
・ Remove the eyepiece mold unit (#B378).
#623×2
#B378
LCD window
#335
- D18・D7000 -
NICS
VBA29001-R.3814.A
SB PCB unit
・ Unsolder the eight wires.
[Black]
[Black]
[Green]
[Yellow] [Blue]
[White]
[Gray]
[Orange]
○= Boss
- D19・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the SB PCB unit (#B1013).
・ Remove the SB shield plate unit (#B80).
#B1013
#B80
#635×3
#B362
#635×3
#B363
- D20・D7000 -
NICS
VBA29001-R.3814.A
#629
#B325
#701×2
#700
#357
- D21・D7000 -
NICS
VBA29001-R.3814.A
・ Take out the four screws (#635).
・ Remove the top LCD unit.
#635×4
Power dial
#696×2
#355×2
#339
- D22・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the E-ring (#722).
・ Remove the button (#340), rubber (#341), and spring (#342).
#340
#341
#342
#722
#693×2
#350
#B348
#358
- D23・D7000 -
NICS
VBA29001-R.3814.A
Shoe base
#654×4
#650
Remove solder ×4
・ Remove the hot shoe spring (#321), shot shoe (#319), and hot shoe mold unit (#B320).
#321
#319
#B320
- D24・D7000 -
NICS
VBA29001-R.3814.A
・ Push the lever in the direction of the arrow, and raise the SB (flash unit) as below.
・ Take out the four screws (#629).
#629×4
#301
- D25・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the roller (#312).
#312
#305
#305
#650
#B306
- D26・D7000 -
NICS
VBA29001-R.3814.A
#308
#B302
#630×2
#317
#318
#307
- D27・D7000 -
NICS
VBA29001-R.3814.A
[Red]
[Black] #635×2
FPC
#699
#B454
#451
- D28・D7000 -
NICS
VBA29001-R.3814.A
#602
#B464
#453
#468
#635×3
○= Boss
#B1007RP
- D29・D7000 -
NICS
VBA29001-R.3814.A
Release mode dial lock button
・ Take out the two screws (#635), and remove the dial lock base unit (#471).
・ Remove the spring (#470) and button (#469).
#635×2
#471
#470
#469
Eyelet
・ Remove the adhesive (C-8008B) that is attached to the two nuts (#715).
・ Remove the two nuts (#715).
・ Remove the two eyelets (#B145).
#B145
#B145
#715
#715
C-8008B
C-8008B
- D30・D7000 -
NICS
VBA29001-R.3814.A
5. Separation of Front Body from Rear Body
#706×2
○= Boss
- D31・D7000 -
NICS
VBA29001-R.3814.A
・ Take out the four screws (#706).
#706×4
#697
- D32・D7000 -
NICS
VBA29001-R.3814.A
6. Rear Body
IF PCB unit
#706×2
#675×2
- D33・D7000 -
NICS
VBA29001-R.3814.A
Unhook.
#107
#666×2
IF PCB unit #72
#83×2
#1039
#1037
TA-0026 (4×8)
- D34・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the GND plate (#106).
#106
Relay-PCB
#1012
[Red]
[Black]
- D35・D7000 -
NICS
VBA29001-R.3814.A
DCDC ISC PCB unit
#747
#683
#109
#1004
#148
- D36・D7000 -
NICS
VBA29001-R.3814.A
・ Peel off the sheet (#745).
#745
TA-0016
[Green] (8×8)
[Blue]
#694
#B1002
#683×3
- D37・D7000 -
NICS
VBA29001-R.3814.A
#604
#141
#604×2
#474
- D38・D7000 -
NICS
VBA29001-R.3814.A
・ Take out the two screws (#683).
・ Pull out the arranged wires.
#683×2
#1035
[Gray]
[Yellow]
#1035
- D39・D7000 -
NICS
VBA29001-R.3814.A
PD PCB unit
#1004 #683×3
[Gray]
[Green] #1004
[Orange]
#110
#108
#143
- D40・D7000 -
NICS
VBA29001-R.3814.A
#90
#617×2
#706×2
#B67 #140
#B67
- D41・D7000 -
NICS
VBA29001-R.3814.A
#144
○= Guide
#B1043
○= Guide
- D42・D7000 -
NICS
VBA29001-R.3814.A
Battery contact
#1011
#604×3
#604×3
#158
#158
#159
7. Front Body
Shutter unit
[Red]
[Black]
Remove solder
bridges.
- D43・D7000 -
NICS
VBA29001-R.3814.A
・ Disconnect the FPC.
・ Slacken the FPC, and take out the screw (#638).
#638
#635×2
#B10223
- D44・D7000 -
NICS
VBA29001-R.3814.A
AF sensor unit
#161×3
#B2163
#162×3
- D45・D7000 -
NICS
VBA29001-R.3814.A
8. Separation of Prism Box from Front Body
#697×3
○= Boss
- D46・D7000 -
NICS
VBA29001-R.3814.A
Aperture control unit
TA-0015 (8.5×17)
[Black]
[Red]
○= Boss
#B242
#621×4
- D47・D7000 -
NICS
VBA29001-R.3814.A
Connection-FPC
#1039
#94
#95
#96
#602×2 #789
- D48・D7000 -
NICS
VBA29001-R.3814.A
MD PCB unit
・ Unsolder the four wires.
・ Remove the solder bridges at two places.
[Yellow]
[Black]
[Black]
[Red]
#683×2
#1005
- D49・D7000 -
NICS
VBA29001-R.3814.A
Mirror driving unit
・ Take out the two screws (#674).
・ Take out the screw (#673).
・ Remove the mirror driving unit (#B280).
#B280
#674
#673
#195
#680 #185
#193 #185
- D50・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the spring (#195).
#195
#680
#191
#194
- D51・D7000 -
NICS
VBA29001-R.3814.A
AF motor unit
#637×2
#B171
○= Boss
Double-stick tape
#711
#136
- D52・D7000 -
NICS
VBA29001-R.3814.A
Bayonet
#661×4
#111
#660
#112
- D53・D7000 -
NICS
VBA29001-R.3814.A
Apertrue couping ring unit
#122 #121
#635×2
Gear unit
#137
#B131
#133
Unhook #135
Gear unit
#134
- D54・D7000 -
NICS
VBA29001-R.3814.A
Lens contact FPC unit
・ Remove the solder bridges that joint the F-F0 PCB unit (#B1024).
・ Unsolder the three contacts from the lens contact FPC unit (#B1018).
#B1018
#B1024
- D55・D7000 -
NICS
VBA29001-R.3814.A
・ Unsolder the three wires.
・ Take out the screw (#606).
#606
[Black]
[Red]
Front
[Blue]
Lateral side
#B1018
#114
- D56・D7000 -
NICS
VBA29001-R.3814.A
#635×2
#683
#124
TA-0026 (4×8)
#125 #127
#192
#683
#126
#119
#B116
#297 #669×2
#B296
#292
- D57・D7000 -
NICS
VBA29001-R.3814.A
・ Remove the adhesive (C-8008B) that is attached to the main mirror shaft (#293).
・ Remove the main mirror shaft (#293).
・ Remove the mirror unit (#B10231).
#B10231
#293
#199
#197
#198
#196
TA-0027 (1.5×5)×4
#B120
#216
#215 #604×2
- D58・D7000 -
NICS
VBA29001-R.3814.A
9. Prixm Box
Metering FPC unit
・ Remove the solder bridges.
・ Take out the three screws (#514).
#514×3
・ Remove the metering FPC unit (#B1008).
・ Remove the three springs (#515).
#B1008
・ Take out the two screws (#683).
・ Remove the light measuring base plate unit (#B513).
#515×3
#683×2
#B513
Remove solder
bridges.
#B1020
#518
- D59・D7000 -
NICS
VBA29001-R.3814.A
LCD unit
・ Take out the two screws (#656).
・ Remove the LCD unit (#B1010).
#B1010
#656×2
#501 #B520RP
NICS
VBA29001-R.3814.A
・ Remove the retainer plate.
・ Remove the protection sheet.
・ Remove the penta prism (#4).
・ Remove the F-mask plate.
Retainer plate
#4
Protection sheet
F-mask plate
#635×2
#B540
- D61・D7000 -
NICS
VBA29001-R.3814.A
Assembly/Adjustment
1. Prism Box
#635×2
#B540
Penta prism
・ Attach the tape (#510) to the penta prism (#4).
・ Put the F-mask plate.
・ Mount the penta prism (#4).
#4 #510
F-mask plate #4
- A1 ・ D7000 -
NICS
VBA29001-R.3814.A
Retainer plate
Protection sheet
= Hook
- A2 ・ D7000 -
NICS
VBA29001-R.3814.A
Screen BOX unit
・ Mount the screen BOX unit (#B520RP).
・ Attach the spring (#501).
#501
#B520RP
LCD unit
・ Mount the LCD unit (#B1010).
・ Tighten the two screws (#656).
#B1010
#656×2
- A3 ・ D7000 -
NICS
VBA29001-R.3814.A
Penta FPC unit
#518
#B1020
Make solder
bridges.
○= Boss
- A4 ・ D7000 -
NICS
VBA29001-R.3814.A
Metering FPC unit
・ Mount the light measuring base plate unit (#B513).
・ Tighten the two screws (#683).
・ Attach the three springs (#515).
・ Mount the metering FPC unit (#B1008).
・ Tighten the three screws (#514).
After tightening the screws clockwise, give them two turns counterclockwise.
#514×3
#B1008
#515×3
#683×2
B513
・ Bend the FPC towards the direction of the arrow, and fit the bosses in the holes.
○= Boss
- A5 ・ D7000 -
NICS
VBA29001-R.3814.A
2. Front Body
#199
#198
#197
#197
#198
#196
TA-0027 (1.5×5)×4
#215 #B120
#216
#216
#215
#604×2
- A6 ・ D7000 -
NICS
VBA29001-R.3814.A
Mirror driving unit
TNG-87
#B10231
#293
・ Attach the spring (#292) and main mirror measuring unit (#B296).
・ Tighten the two screws (#669).
・ Raise the main mirror (to become mirror-up status), and insert the pin (#297).
#669×2
#B296
#297
#292
- A7 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Apply the adhesive (C-8008B) to the pin (#297) and main mirror shaft (#293).
#297
C-8008B
#293
#635×2
#683
#124
TA-0026 (4×8)
#125 #127
#192
#683
#126
#115
#119
TNG-87
#B116
- A8 ・ D7000 -
NICS
VBA29001-R.3814.A
Lens contact FPC unit
・ Mount the GND plate (#114).
・ Mount the lens contact FPC unit (#B1018).
#B1018
#114
・ Position the lens contact FPC unit (#B1018) in the direction of the arrow, and tighten the screw (#606).
・ Solder the three wires.
[Black]
#606
[Red]
#B1018
Front side
#B1024
[Blue]
Lateral side
- A9 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Make solder bridges to joint the F-F0 PCB unit (#B1024).
・ Solder the three contacts of the lens contact FPC unit (#B1018).
Solder bridges
#133
Spring-hooking position
#135
#134
Gear unit
- A10 ・ D7000 -
NICS
VBA29001-R.3814.A
Mounting position
#635×2
#137
#B131
#121
#122
- A11 ・ D7000 -
NICS
VBA29001-R.3814.A
Bayonet
#112
TNG-87
Back side
#661×4
#111
#660
- A12 ・ D7000 -
NICS
VBA29001-R.3814.A
#711
#136
Initial position
・ Give the gear (#134) three turns in the direction of the arrow.
#134
Move the aperture coupling ring back and forth slowly, and
check operations.
- A13 ・ D7000 -
NICS
VBA29001-R.3814.A
AF motor unit
#637×2
#B171
・ Attach the FPC by fitting the bosses in the holes, and secure it with the double-stick tape.
○= Boss
Double-stick tape
- A14 ・ D7000 -
NICS
VBA29001-R.3814.A
Horizontal lever/Vertical lever
#680
#191
TNG-87
#194
TNG-87
#194
#194
#185
- A15 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the spring (#195).
・ Mount the horizontal lever (#193).
・ Tighten the screw (#680).
#680 #185
#193
#193
#195
TNG-87
#195
#652
- A16 ・ D7000 -
NICS
VBA29001-R.3814.A
Mirror driving unit
・ Turn the cam all the way in the direction of the arrow.
Cam
・ Raise the main mirror (to become mirror-up status), mount the mirror driving unit (#B280).
#B280
TNG-87
#674
#673
- A17 ・ D7000 -
NICS
VBA29001-R.3814.A
MD PCB unit
#1005
FPC
#683×2
[Black]
[Red]
- A18 ・ D7000 -
NICS
VBA29001-R.3814.A
AF-M lever unit
・ Mount the AF-M lever unit.
・ Tighten the screw (#638).
#788 #93
#638 #94
#91 #723
AF-M lever unit
#95
#96
#602×2 #789
TNG-87
Connection-FPC
#1039
TA-0026 (4×8)
Lens release
button unit
- A19 ・ D7000 -
NICS
VBA29001-R.3814.A
#B242
#621×4
[Black]
[Red]
○= Boss
TA-0015 (8.5×17)
- A20 ・ D7000 -
NICS
VBA29001-R.3814.A
• Refer to "Height adjustment of AF coupling shaft" of "D/SLR ADJUSTMENT Separate Volume ① " for
details.
Standard: 1.7 ± 0.2 mm
If the result does not meet the standard, turn the below adj. screw for the adjustment.
#652
EDB0011
• Refer to " ① Models WITHOUT adjusting mechanism of the aperture lever" of "Height adjustment of
aperture lever" of D/SLR ADJUSTMENT Separate Volume ① for details.
Standard: 3.3 - 3.6 mm
Tool (Device)
J18004
- A21 ・ D7000 -
NICS
VBA29001-R.3814.A
3. Mounting of Prism Box on Front Body
#697×3
○= Boss
- A22 ・ D7000 -
NICS
VBA29001-R.3814.A
AF sensor unit
#162×3
#161×3
#B2163
- A23 ・ D7000 -
NICS
VBA29001-R.3814.A
Tool (Device) J63120
2.6 mm
2.7 mm
2.8 mm (reference)
2.9 mm
3.0 mm
Check each size here.
J63120
#B2163
Screw
- A24 ・ D7000 -
NICS
VBA29001-R.3814.A
• Refer to "Angle adjustment of main mirror and sub-mirror" of D/SLR ADJUSTMENT Separate
Volume ① for details.
If the result does not meet the standard, make the adjustment by turning the below eccentric pin with the
hex. key wrench (φ1.5mm).
Screw (#669)×2
- A25 ・ D7000 -
NICS
VBA29001-R.3814.A
S����������������������������
tandard value of sub-mirror
(59°angle [for D200/D300])
Up-down deviation 0±5′
If the result does not meet the standard, make the adjustment by turning the below eccentric pin with the hex. key
wrench (φ1.5mm).
Tool (device)
J19132 J19132B J18389
59�
°
Main/Sub mirror angle inspection measurement-use mirror Reflection mirror Hex. key ������
wrench
(φ 1.5 mm)
tool 59 ゜
(for D300/D200)
- A26 ・ D7000 -
NICS
VBA29001-R.3814.A
Shutter unit
・ Turn the gear in the direction of the arrow, and align the indexes.
Gear
#B10223
When mounting, be
#B10223 careful NOT to pinch
the FPC.
#638
- A27 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Make solder bridges to joint the MD PCB unit (#1005).
・ Solder the two wires.
[Red]
[Black]
Take a note of the data (A/B value) that are imprinted on the shutter (see below), because they will be necessary
to be input when the camera body (except imaging) adjustment is made.
A B
-71 +1059
- A28 ・ D7000 -
NICS
VBA29001-R.3814.A
4. Rear Body
Battery contact
#1011
#604×3
#604×3
#158
#158
#159
#730×2
・ Attach the each double-stick tape [TA-0026 (8×50), (7.5×17), and (4.5×37.5)].
・ Attach the shield sheet (#873).
#873
- A29 ・ D7000 -
NICS
VBA29001-R.3814.A
Main condenser unit
・ Mount the main condenser unit (#B1043), and attach the two pieces of the double-stick tape (#730).
・ Arrange the wires as below.
B1043 ○= Guide
#730×2
○= Guide
#144
- A30 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Mount the GND plate (#140) on the bottom base unit (#B67).
・ Tighten the two screws (#617).
#617×2
#140
#B67
#706×2
#B67
- A31 ・ D7000 -
NICS
VBA29001-R.3814.A
Shield plate/GND plate
TA-0026 (4.5×4.5)
#90
#90 #800
#90
#110
#108
#143
- A32 ・ D7000 -
NICS
VBA29001-R.3814.A
PD PCB unit
#683×3
#1004
#1004
[Gray]
[Green]
[Orange]
- A33 ・ D7000 -
NICS
VBA29001-R.3814.A
Connector PCB unit
[Gray] #851
[Yellow]
#1035
#1035
#1035
○= Boss
#683×2
- A34 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Mount the battery pack connector cover (#474).
・ Tighten two screws (#604).
#604×2
#474
・ Attach the tape (#823) to the GND plate (#141), and mount them.
・ Tighten the screw (#604).
#823
#604
#141
- Reference position
for attachment
- A35 ・ D7000 -
NICS
VBA29001-R.3814.A
DCDC ISC PCB unit
・ Mount the DCDC ISC PCB unit (#B1002).
・ Tighten the three screws (#683).
・ Tighten the screw (#694).
・ Connect the FPC.
・ Attach the tape [TA-0016 (8×8)].
・ Solder the two wires.
TA-0016
[Green] (8×8)
[Blue]
#694
#B1002
#683×3
#745
#745
- A36 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the double-stick tape [TA-0026 (4.5×4.5)] to the GND plate (#148).
・ Mount the GND plate (#148).
・ Tighten the screw (#683).
#683
#1004
TA-0026 (4.5×4.5)
#148
#148
#603
#109
#858
#109
Reference position for attaching [#858]
- A37 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the tape (#747).
#747
Relay-PCB
#683
#1012
[Red]
[Black]
- A38 ・ D7000 -
NICS
VBA29001-R.3814.A
IF PCB unit
#106
○= Boss
#1019
#1037
TA-0026 (4×8)
- A39 ・ D7000 -
NICS
VBA29001-R.3814.A
Hook
#107
#675×2
- A40 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Tighten the two screws (#706).
・ Attach the double-stick tape (#734).
・ Attach the gasket (#860).
#706×2
#734
#860
Reference position for
attachment
- A41 ・ D7000 -
NICS
VBA29001-R.3814.A
5. Mounting of Front Body on Rear Body
○= Boss
Front body unit
#706×4
#697
- A42 ・ D7000 -
NICS
VBA29001-R.3814.A
#706×2
○= Boss #1039
- A43 ・ D7000 -
NICS
Inspection and adjustment of flange-back (body-back)
VBA29001-R.3814.A
• Refer to " ② Models WITH rear body" of "Inspection and adjustment of flange-back (body-back)" of
D/SLR ADJUSTMENT Separate Volume ① for details.
Rotational direction/divisions of scale: Turn the index circle by 17 divisions of scale in the
direction of the arrow so that the needle is on "0.17 mm" position.
<Standard> (Body-back) distance: 48.5mm +0.005mm
-0.025mm
/parallelism: 0.015mm or less
Caution: For some bodies, the washers are already put (1) on the face of the camera-body for mounting the image
sensor unit, and (2) on the attaching face of the image-sensor unit. In this case, there are marks at the
following two types of marking position.
(1)The face of camera body for mounting the image sensor unit: To adjust the height of the camera body
※ In case of disassembling/replacing the image sensor unit, put the washers back to the original positions.
Marking position
(2)The attaching face of image sensor unit: To adjust the height of the image sensor unit
※ Remove the wahsers when the image sensor unit must be replaced.
Marking position
Tool (device)
J19004-1 J18001-1
NICS
VBA29001-R.3814.A
6. Top Cover
Eyelet
・ Attach the two eyelets (#B145), and tighten the two nuts (#715).
Threaded portion
L-271
#B145
Threaded portion
L-271
#B145
#715
#715
C-8008B
C-8008B
#470
#469
LEN317A
- A45 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the sponge (#758) to the dial lock base unit (#471).
・ Mount the dial lock base unit (#471).
・ Tighten the two screws (#635).
#635×2
#471
#758
Drip-proof sponge
・ Attach the sheet (#44) and sponge (#46).
#46
#44
#756 #770×4
#757
- A46 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the sponge (#796).
・ Attach the two sponges (#337).
・ Attach the two sponges (#336).
#796
#337×2
#336×2
#338
#765
#766
#767
#762
#764
#769
#768
- A47 ・ D7000 -
NICS
VBA29001-R.3814.A
Top cover FPC unit
・ Apply the grease (CFD-409Z) to the pattern surface of the top cover FPC unit (#B1007RP).
CFD-409Z CFD-409Z
#B1007RP
○= Boss
Tip of lever
Put the tip of the lever into the hole of the top cover.
#635×3
- A48 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Align "MUP" of the release mode dial unit (#B464) with the index of the top cover, and mount it.
#B464
LEN317A
#602
Attach with the projection facing upwards.
#453
#468
#B454
FPC
LEN317A
○= Boss
#451
- A49 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Arrange the wires as below.
・ Tighten the two screws (#635).
・ Solder the two wires.
[Red]
[Black] #635×2
CFD-409Z
・ Mount the each flash pop-up arm (#317 and #318), and tighten the two screws (#630).
CFD-409Z
#630×2
CFD-409Z
- A50 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the collar (#307).
#307
CFD-409Z
CFD-409Z
#B302
・ Spread the SB lower cover unit (#B302) as indicated by the arrow, and mount it.
・ Attach the collar (#308).
#B302 #308
- A51 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the SB rotating shaft (#B306).
#B306
#650
#305
#305
#650
groove
- A52 ・ D7000 -
NICS
VBA29001-R.3814.A
#312
Place the wires in the guide in the following order: [Blue] [Green] [Gray]
#650
Place the wires between the guides in the following order: [Yellow]
[White] [Orange]
- A53 ・ D7000 -
NICS
VBA29001-R.3814.A
#301
#629×4
- A54 ・ D7000 -
NICS
VBA29001-R.3814.A
Shoe base
・ Attach the hot shoe mold unit (#B320), hot shoe (#319), and hot shoe spring (#321).
#321
#319
#B320
#654×4
Make solder×4
Power dial
・ Attach the double-stick tape (#360) to the roller (#358).
・ Put the roller (#358).
LEN317A
#358
#358
#360
- A55 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the power dial (#350).
#350
#693×2
#B348
LEN317A
#340
LEN317A
#341
#342
LEN317A
#722
- A56 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the two ON-OFF SW brushes (#355).
・ Tighten the two screws (#696).
・ Turn the power dial in the direction of the arrow.
・ Attach the button (#339).
#696×2
#355×2
#339
Assembled
#635×4
- A57 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Tighten the two screws (#701).
#701×2
Spring-hooking position
#700
#357
#629
#B325
- A58 ・ D7000 -
NICS
VBA29001-R.3814.A
Command dial unit
・ Mount the rear command dial unit (#B363), and tighten the three screws (#635).
・ Solder the three contacts.
#635×3
#B363
・ Mount the front command dial unit (#B362), and tighten the three screws (#635).
・ Solder the three contacts.
#635×3
#B362
SB PCB unit
・ Mount the SB shield plate unit (#B80).
・ Mount the SB PCB unit (#B1013).
○= Boss
#B1013
#B80
- A59 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Tighten the three screws (#635).
・ Solder the eight wires.
[Black]
[Black]
[Green]
[Yellow] [Blue]
[White]
#635×3
[Gray]
[Orange]
○= Boss
- A60 ・ D7000 -
NICS
VBA29001-R.3814.A
LCD window
#335
・ Attach the sponge (#774) and mount the eyepiece mold unit (#B378).
・ Tighten the two screws (#623).
・ Connect the harness to the top cover unit.
#623×2
[Black] [Green] [Yellow]
#B378
#774
- A61 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Mount the top cover unit.
・ Tighten the screw (#613).
#613
#613
Black
Red
TA-0015 (8.5×17)
- A62 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Attach the sponge (#556) to the diopter adjustment knob (#551).
・ Attach the roller (#550) and mount the above diopter knob (#551).
・ Tighten the screws (#557).
#556
#557
#551
#550
#551
CFD-409Z
Apply to the overall.
#622
- A63 ・ D7000 -
NICS
VBA29001-R.3814.A
I/F cover unit B28RP
#781
#779×2
#71
#731
#73
#84
#70
#603 #782
#603×2 #777
#778
#780
#1053
#66
○= Guide
C-8008B
#629×2
The two wires must be placed
under the GND plate.
- A64 ・ D7000 -
NICS
VBA29001-R.3814.A
7. Rear Cover
LV lever
#610×2
#485
#481
#1026
#483
#482
#492
#723
#486
TFT monitor
・ Mount the TFT monitor (#1049) and retainer plate (#406).
・ Tighten the four screws (#672).
#672×4
#406
Direction for positioning
#1049
- A65 ・ D7000 -
NICS
VBA29001-R.3814.A
Selector lock lever
#B420
#416
LEN317A
Rear button
#413 #421
#414
#427
#412 #428
#429
- A66 ・ D7000 -
NICS
VBA29001-R.3814.A
○= Boss
○=ボス
#B1016
CFD-409Z
Back side
#424 #422
#415
- A67 ・ D7000 -
NICS
VBA29001-R.3814.A
#733
[Blue] #833
[Red] Attach based on
the center of the
retainer plate.
#402
- A68 ・ D7000 -
NICS
VBA29001-R.3814.A
8. Image Sensor/TOGO PCB
Caution: For some camera bodies, washers are already attached on the face that is for mounting
the image sensor unit.
#678×3
#B20051
・ Arrange the wires as below, and secure them with the three pieces of the tape [TA-0016 (8×8)].
・ Connect the harness.
TA-0016 (8×8)×3
- A69 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Connect the connection-FPC (#1041).
#1041
#B1001RP
- A70 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Tighten the four screws (#683).
Inside
- A71 ・ D7000 -
NICS
VBA29001-R.3814.A
• Refer to "How to connect camera and PC" of ADJUSTMENT Separate Volume ② for details.
How to install inspection and adjustment software for camera body (except imaging)
• Refer to "How to install inspection and adjustment software for camera body (except imaging)" of
ADJUSTMENT Separate Volume ② for details.
Tool (Device)
J65155
Caution 1: In case of running out of the secondary rechargeable battery of the TOGO PCB, communications
with PC may become impossible. In this case, mount the rear cover and set the settings of "Time
zone and date" on the menu.
Caution 2: Before the inspection and adjustment, set the shooting mode dial of the top cover unit to "P".
• Take out the screw (#557), diopter adjustment knob (#551), and roller (#550).
#557
#551
#550
- A72 ・ D7000 -
NICS
VBA29001-R.3814.A
• Peel off the tape [TA-0015 (8.5×17)], and unsolder the two wires of the main condenser unit.
• In order to prevent short-circuit, insulate the two wires with the tape.
TA-0015 (8.5×17)
[Red]
[Black]
• Take out the two screws (#629) and one screw (#613).
#613
#629×2
- A73 ・ D7000 -
NICS
VBA29001-R.3814.A
• Take out the screw (#622).
#622
• Slacken the I/F cover unit by pulling in the direction of the arrow, and take out the screw (#613).
• Disconnect the FPC.
#613
- A74 ・ D7000 -
NICS
VBA29001-R.3814.A
• Mount the bottom cover unit, and attach the three screws (#657) temporarily.
#657×3
Tool (Device)
J63119 J63070 J18267 J15443 J15444 Use Nikon comm.
product.
AE/CCD use Color viewer Lens 2way level 2way stage Power connector Hex. key wrench
(φ1.5 mm)
chart board AF50/1.4D EP-5B
- A75 ・ D7000 -
NICS
VBA29001-R.3814.A
Inspection and adjustment of parallax
• With the rear cover unit being lifted, connect the two FPCs.
• Mount the rear cover unit.
- A76 ・ D7000 -
NICS
VBA29001-R.3814.A
• Attach the rear cover unit (#B401) temporarily with the screw (#614).
#614
MB-D11
• Refer to "Inspection and adjustment of parallax" of D/SLR ADJUSTMENT Separate Volume ① for
details.
• For shutter release, use the release button for vertical position of MB-D11.
• Set the distance between the D7000 parallax chart and the focal plane mark () to "0.7m", and set the
focus ring of the lens to "0.7m".
- A77 ・ D7000 -
NICS
VBA29001-R.3814.A
• If the result does not meet the standard, make the adjustment with the top cover unit being lifted as
indicated by the arrow.
Be careful of the connected FPCs and wiring.
X-axis direction
100%
98%
Y-axis
direction
D7000
Parallax chart
AF50/1.4D
0.7m
X-axis direction
Y-axis direction
MB-D11
- A78 ・ D7000 -
NICS
VBA29001-R.3814.A
• Take out the screw (#614).
#614
- A79 ・ D7000 -
NICS
VBA29001-R.3814.A
• Take out the three screws (#657), and remove the bottom cover unit.
#657×3
- A80 ・ D7000 -
NICS
VBA29001-R.3814.A
• Slacken the IF cover unit by pulling in the direction of the arrow, and tighten the screw (#613).
• Connect the FPC.
#613
IF cover unit
#622
- A81 ・ D7000 -
NICS
VBA29001-R.3814.A
• Tighten the two screws (#629) and one screw (#613).
#613
#629×2
TA-0015 (8.5×17)
[Red]
[Black]
- A82 ・ D7000 -
NICS
VBA29001-R.3814.A
• Attach the roller (#550) and diopter adjustment knob (#551), and tighten the screw (#557).
#551 #557
#550
Tool (Device)
J18267 J15443 J15444 Use Nikon comm. Use Nikon
100%
98%
product. comm. product
D7000
Parallax chart
AF50/1.4D
0.7m
Parallax chart Lens 2way level 2way stage Power connector Hex. key wrench MB-D11
(φ1.5mm)
AF50/1.4D EP-5B
※ Print out "parallax chart on Page C3" in A4 size without zooming in/out, and use them.
- A83 ・ D7000 -
NICS
VBA29001-R.3814.A
Shield plate
= Hook ×2
#79
#683
#683
= Hook ×2
#78
#617
- A84 ・ D7000 -
NICS
VBA29001-R.3814.A
9. External Appearance
Front cover unit
・ Insert a lumirror sheet, etc, into the gap of the top cover pop-up section as below. Then raise the section by
sliding the sheet in the direction of the arrow.
Approx. 2cm
Approx.
4cm
Lumirror sheet
#616 #27
#614×2 #394
#397
#389×2
#B24RP
#611×2
After mounting the front cover unit (#B24), check operations of the aperture coupling ring and each button.
- A85 ・ D7000 -
NICS
VBA29001-R.3814.A
SD cover unit
・ Mount the SD cover unit.
・ Tighten the four screws (#614).
#B431 #440
#614×4
#436
SD cover unit
#435
#859
Valley-fold
- A86 ・ D7000 -
NICS
VBA29001-R.3814.A
・ Tighten the three screws (#614).
・ Tighten the screw (#675).
#614×2 #614
#675
#B407
#613×2
- A87 ・ D7000 -
NICS
VBA29001-R.3814.A
Necessary inspection and adjustment of camara body (except imaging) when parts are replaced
・ When the TOGO PCB unit has been replaced, be sure to update the�������������
firmware of� MAIN/RISC
���������������������������
versions and the
compensation data on lens distortion before writing the initial values.
・ During the inspections and adjustments, do NOT touch the discharging areas and the main condenser.
(○: Adj. �
△ : Insp. only)
Writing Insp. & Insp. & Insp. & adj. Adj. of Insp. & X-delay� Insp. &
of initial adj. for adj. for AE for aperture voltage adj. of adj. adj. for AF
value AE CCD accuracy accuracy of battery built-in SB accuracy
positioning check flashlight
function qty
Shutter unit
○
TOGO PCB unit
○ △ ○ ○ ○ ○ ○ ○
PD���������
PCB unit
○
SB PCB unit
○
DC/DC ISC�
PCB unit ○
SB lower cover
unit ○
AF sensor unit
○
Prism box unit
○ ○
Aperture control
unit ○
Metering FPC
unit ○ ○
Front body unit
○ ○ ○ ○
Firmware update
• Refer to " ① Inspection and adjustment for AE accuracy" of ADJUSTMENT Separate Volume ② for
details.
- A88 ・ D7000 -
NICS
VBA29001-R.3814.A
X-delay adjustment
When the shutter unit or TOGO PCB unit has been replaced, input the delay-values that are imprinted on the
shutter unit (see below).
• Type in the X-delay values (A and B) that are imprinted on the shutter unit into the above each column.
Then, click "Write" button.
Tool (Device)
J19123 RJ is unavailable. J18267 J18498 J18499 Use Nikon product.
AE CCD use chart Two-way level Two-way stage Color viewer Power connector
board EP-5B
- A89 ・ D7000 -
NICS
VBA29001-R.3814.A
• Refer to " ② Inspection and adjustment for AF accuracy" of ADJUSTMENT Separate Volume ② for
details.
• Insert a paper, etc, into the battery box, in order to secure the power connector (EP-5B). Then, confirm
that the power can be ON.
- A90 ・ D7000 -
NICS
VBA29001-R.3814.A
【Not up to standard】
• With AF X-positioning tool (J63120), make the adjustment.
Steps
① Separate the front body from the rear body (by disassembling up to the stage on Page D32).
② Loosen the screw.
③ With reference to the next page, choose the AF X-positioning tool (J63120) whose red-circled section (see
below) has the appropriate width.
④ Insert the tip section of the chosen AF X-positioning tool into the below (green-colored) gap.
⑤ Position the AF sensor unit (#B2163) in the direction of the arrow, and tighten the screw.
⑥ Mount the rear body, and restore to the former state.
⑦ Check the X-position.
J63120
#B2163
Screw
- A91 ・ D7000 -
NICS
VBA29001-R.3814.A
・Tip section's width of the tool, appropriate to the showing value of adj. software
Temporary standard in case the reference is 2.8 mm (0μm)
※ As for some bodies, the reference (0μm) is not 2.8 mm, so this is just tentative criteria for judgement.
- A92 ・ D7000 -
NICS
VBA29001-R.3814.A
Tool (Device)
J18266 J15259 J15280 J18191 J15264
※ Print out "X & Y charts on Page C4 and C5" in A3 size without zooming in/out, and use them.
- A93 ・ D7000 -
NICS
VBA29001-R.3814.A
Confirmation of data
• Refer to " ④ Switch information monitor" of ADJUSTMENT Separate Volume ② for details.
• Refer to " ⑤ Inspection of sequence operation" of ADJUSTMENT Separate Volume ② for details.
• Refer to " ⑥ Inspection of sequence error" of ADJUSTMENT Separate Volume ② for details.
• Refer to " ⑦ CPU version, number of release times" of ADJUSTMENT Separate Volume ② for details.
• "Flash count" is also indicated on D7000.
• Refer to " ⑧ Inspection of LCD light-up" of ADJUSTMENT Separate Volume ② for details.
• Refer to " ⑨ Inspection of motor operation" of ADJUSTMENT Separate Volume ② for details.
• Refer to " ⑪ Reset of compensated AF defocus amount" of ADJUSTMENT Separate Volume ② for
details.
• Refer to " ⑫ Rewriting of offset value of AF adj. lens" of ADJUSTMENT Separate Volume ② for
details.
- A94 ・ D7000 -
NICS
VBA29001-R.3814.A
Bottom cover unit
Bottom cover unit
#476 #75
#711×2 #784
#786
#477
#475
#783
#785 #25
#810
#620
#657×7
- A95 ・ D7000 -
NICS
VBA29001-R.3814.A
External part
#549
#69
MZ-800SEL
#B151
35°
MZ-800SEL
- A96 ・ D7000 -
NICS
VBA29001-R.3814.A
Necessary inspection and adjustment of imaging when parts are replaced
(○: Necessary �
△ : Inspection only)
Image adj. Image adj. Image adj. Image adj. Image adj. White point Image Insp. & Insp. & Factory Ver.No/ ISC insp.
1 2 3 4 5 compensation shutter adj. of adj. of default Ser.No *
insp. & gradient TFT setting
adj. sensor
Shutter unit
○
TOGO
PCB unit ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Image sensor
unit ○ ○ ○ ○ ○ ○ ○ △
DC/DC ISC�
PCB unit △
Prism box
unit
PD PCB unit
△
LCD monitor
unit ○
License
sheet ○
* In other cases than replacements of the parts, if users point out the problems, perform the image sensor
cleaning operations/inspections.
- A97 ・ D7000 -
NICS
VBA29001-R.3814.A
Image adjustment 1
Imaging adj. tool Color viewer Filter SP1 Filter SP2 Filter SP3 Luminance meter
lens (BM-3000)
Image adjustment 2
Tool (Device)
J63070 J18191 J61185 J63068
Image adjustment 3
Tool (Device)
J19123 RJ is unavailable. J61185 J63068
NICS
VBA29001-R.3814.A
Image adjustment 4
Steps
(1) With the color adj. body for D3100 (J61244) and software for checking color adj. device (DX)[J61247],
check the conditions of the color adj. device and SG chart (such as variation of brightness,
deterioration, etc, of lamp/SG chart).
• Click "Confirming color adj. device". Check the conditions of the color adj. device/SG chart.
OK Check/replace
Reacquire the color reference
value by color adj. body.
Check-completion
- A99 ・ D7000 -
NICS
VBA29001-R.3814.A
(2) With the D7000 image inspection and adjustment software (J65156), make the adjustment.
Color adjustment
Software auto-
matically shoots
the image.
Repair body
(Suspected body needing repair) Image captured by repair body
OK
Adjustment-completion
Tool (Device)
J11374 J61244 J63112 J63113
- A100 ・ D7000 -
NICS
VBA29001-R.3814.A
Image adjustment 5
• Refer to "Inspection and adjustment of shutter via shot image" of " ① Imaging adjustment" of
ADJUSTMENT Separate Volume ③ for details.
Tool (Device)
J19123 RJ is unavailable J61185 J63068
• Refer to " ② Inspection and adjustment of gradient sensor" of ADJUSTMENT Separate Volume ③ for
details.
Standard: fm -1°to +1°
Tool (Device)
J18267 J15443 J15444
※ Print out "gradient-sensor chart on Page C6" in A3 size, and use it.
- A101 ・ D7000 -
NICS
VBA29001-R.3814.A
• Reference value to be obtained for: Sensitivity and Sensitivity ratio/Sensitivity ratio/color adjustment.
• Refer to " ④ Obtaining of reference value" of ADJUSTMENT Separate Volume ③ for details. .
※ Before obtaining reference values, be sure to check the color adj. device with the software for
checking color adj. device (DX)[J61247].
With the color adj. body for D3100 (J61244) and software for checking color adj. device (DX)[J61247],
obtain the color reference values (for checking color adj. device).
• Click "Obtain color reference value". By following the instructions of the software, obtain the color
reference values.
- A102 ・ D7000 -
NICS
VBA29001-R.3814.A
Tool (Device)
J61241 J61244 J63112 J63113 J61247
Shutter tester
• Refer to " ③ Inspection and adjustment of TFT" of ADJUSTMENT Separate Volume ③ for details.
• Refer to " ⑤ Factory default setting" of ADJUSTMENT Separate Volume ③ for details. .
Confirmation of data
• Refer to " ⑦ Version number/Serial number" of ADJUSTMENT Separate Volume ③ for details. .
- A103 ・ D7000 -
NICS
VBA29001-R.3814.A
• Refer to "Inspection and adjustment of "∞ (infinity)" focus" of D/SLR ADJUSTMENT Separate Volume
① for details.
Standard: fm -0.04 to +0.04 ㎜
+0.04 or more: Decrease washers (to be thinner)
-0.04 or less: Increase washers (to be thicker)
Tool (Device)
J19001 J18010 J18394
- A104 ・ D7000 -
NICS
VBA29001-R.3814.A
• How to convert MS-D11
Tool (Device)
Use Nikon product. Use Nikon product.
- A105 ・ D7000 -
NICS
VBA29001-R.3814.A
Settings of oscilloscope
(YOKOGAWA-made DL1540)
Current detector Power supply
INPUT DC
(10V 5A)
TRIGGER MODE AUTO
TRIGGER LEVEL 4.0V
TRIGGER SOURCE CH1
TRIGGER TYPE EDGE
CH POSITION -4.00div
CH COUPLING DC 3-output stabilized power Oscilloscope
PROBE 1:1 supply
FILTER(Bandwidth) FULL Use Nikon comm.product.
FILTER(Smooth) ON
TIME/DIV 500ms/div
V/DIV 200mv/div
Adjust position so Power connector
easily visible.
Standard
- A106 ・ D7000 -
NICS
Charts VBA29001-R.3814.A
3mm
approx 210mm
approx 297mm
- C1 ・ D7000 -
NICS
VBA29001-R.3814.A
approx 210mm
3mm
approx 297mm
- C2 ・ D7000 -
NICS
NICS
100%
98%
- C3 ・ D7000 -
D7000 X-chart
- C4 ・ D7000 -
NICS
D7000 Y-chart
- C5 ・ D7000 -
NICS
- C6 ・ D7000 -
Size / Force
Shutter release button Protrusion: 1.1 ± 0.2 mm Digital micrometer
Halfway-pressing force: 0.88 ± 0.15 N (90 ± 15gf) Tension gauge
Halfway-pressing stroke: 0.35 ± 0.1 mm
Releasing force: 2.74 ± 0.5 N (280 ± 50gf)
Releasing stroke (from halfway-pressing position): 0.3 ± 0.1 mm
Difference btwn half-pressing and releasing force:
1.86 ± 0.5N (190 ± 50 gf/gram-force)
- R1 ・ D7000 -
NICS
VBA29001-R.3814.A
Items Judgment standard Remarks
AF accuracy Yaw
Center: ±4 (fm -4 to +4) mrad PC
Others than center: ±12 (fm -12 to +12) mrad Special tool
Luminance (light
Pitch source) box
Center: ±5 (fm -5 to +5) mrad
Others than center: ±11 (fm -11 to +11) mrad
Def amount
Vertical-horizontal difference (center): 0 ± 45 μm
AF defocus (focus position): 0 ± 30 μm
Shutter accuracy
Speed accuracy "1/8000 sec.": ± 0.55 (fm -0.55 to +0.55) EV Shutter speed tester
"1/4000 sec.": ± 0.35 (fm -0.35 to +0.35) EV AF50/1.4D
Fm "1/2000 sec." to "30 sec.": ± 0.2 (fm -0.2 to +0.2) EV
Shutter curtain speed Both front and rear curtains (up-down 16.6 mm or less):
approx. 2.6 ms
- R2 ・ D7000 -
NICS
VBA29001-R.3814.A
Items Judgment standard Remarks
Viewfinder AF50/1.8D, F5.6;
Parallax Up-down: 0.�������������
15�����������
mm or less looking through
(Difference in center Right-left: 0.15 mm or less viewfinder, make a
mark of 4 corners of
from the shot image/ finder’s field of view
sensor) (FOV) on a paper and
shoot pic. Measure
a difference in center
btwn the actual screen
and the marked paper.
Visual check
Finder field frame Lens vignetting/distortion:
No noticeable vignetting/distortion found
With 0.2mm-or-less
Tilt: (right-left tilt relative to the bottom of finder field frame): deviation of optical
90°± 30’ axis (from finder
eyepiece optical
axis), shoot based on
the finder field frame,
and measure the
angle/tilt .
LCD indication Right-left position: No noticeable deviation found to one side or the Visual check
position in viewfinder other
Tilt: ±1° (range fm - 1° to + 1°)
Standby (idle)/ Main SW / OFF (Any operational button is not pressed.): Power Source: 7.8V
consumption current 200 μA or less +����
0.3Ω
Main SW / ON (Half-release timer: OFF): 200 μA or less Luminance: EV12
Lens: AF50/1.4D
Main SW / ON (Half-release timer: ON): 210 mA or less Measure by digital
Main SW / ON (TFT monitor ON): 310 mA or less multi-meter.
During LV (Live View): 690 mA or less Exclude charging
During recording movie: 720 mA or less current for secondary
rechargeable battery
(full charging: 3 days)
- R3 ・ D7000 -
NICS
VBA29001-R.3814.A
Items Judgment standard Remarks
Clock accuracy Difference par month: ± 30 Wave clock
seconds (20℃)
BC level Level 0 5 light-up Charge Check the level in the
remaining: 80-100% LCD control panel on
Level 1 4 light-up Charge top of camera or TFT
remaining: 60-79% battery information
Level 2 3 light-up Charge
remaining: 40-59%
Level 3 2 light-up Charge
remaining: 20-39%
Level 4 1 light-up Charge
remaining: 1-19%
Level 5 1 light blinks Charge
remaining: 0%
Battery life CIPA standard ・ Setting: Factory default (Exposure mode: M, others:
Room temperature: default settings, shooting luminance face: LV12)
950 frames or more ・ Lens: AF-S DX18-105/3.5-5.6 ED VR
0℃ : 850 frames or more ・ Temperature: 23℃ ±2℃�� ・ Humidity: 50% ±20%
・ < Operation >
Repeat the following at 30 sec. in one cycle:
・AF lens scanning cycled once
・ Repeat the operation as shown in the below table.
・When the number of shots remaining becomes 0,
format card
・ After 6 sec. of half-releasing timer passes, power
OFF
Operation Shots captured Shots captured odd
even number of number of times
times
WITH firing built-in
Release WITHOUT firing flash.
shutter built-in flash. (M-flash/FULL setting)
- R4 ・ D7000 -
NICS
VBA29001-R.3814.A
Battery life . Room temperature: ・S etting: Factory default (Exposure mode: M, others: default settings,
during LV 180 mins. or more shooting luminance face: LV12)
0℃ : 165 mins. or ・ Lens: AF-S VR 18-105/3.5-5.6G ED VR
more ・ Temperature: 23℃ ± 2℃ ・ Humidity: 50% ± 20%
・ < Operation > R epeat the following cycle:
・Start LV (live view)
・ AF lens scanning cycled once
・ ��������������������������������
Keep 15 mins with LV activated.
・ Stop LV
・ 15 min pause
Battery life Room temperature: ・S etting: Factory default (Exposure mode: M, others: default settings,
during movie 130 mins. or more shooting luminance face: LV12)
0℃ : 120 mins. or ・ Lens: AF-S VR 18-105/3.5-5.6G ED VR
more ・ Temperature: 23℃ ± 2℃ ・ Humidity: 50% ± 20%
・ < Operation > R epeat the following cycle:
・Start LV (live view)
・ AF lens scan cycled once
・Start and record movie for 5 mins.
・Stop recording and LV, 5 min pause
・Delete movie file
- R5 ・ D7000 -
NICS
VBA29001-R.3814.A
Dust appearance Compensate exposure so that the center of "500×500 pixel" image AF105mm / F2.8D
F16
becomes 156-182LSB (8bit), compared to correct exposure. In zone
AE: M mode
II area in JPEG of "G shading" item, judge based on dust contrast, Image quality: JPEG FINE
size, quantity, and distance between dusts. WB: Preset
ISO100
Color viewer (5100K)
Allowable quantity: 10 dusts or less Any shutter speed
Size, maximum contrast: Image size: L
・19 pixels or less, 11% or less
・ 23 pixels or less, 9% or less
・ 29 pixels or less, 7.5% or less
Distance btwn dusts: 215 pixel or more separation
4928
Zone I
816
1632 Zone II
3264
816
- R6 ・ D7000 -
NICS
VBA29001-R.3814.A
0.25
7.56
B
A'
A
30.24
45.36
0.25 60.48
60.98
5.10.2.5 バックライト寿命
TFTユニットついては詳細はTFTパネルの納入仕様書による。
5.10.3記録
評価項目 規格 試験条件
記録・再生 本画像・サムネイル画像
異常ないこと 各試験で確認
Exif情報、サイズ
レリーズ耐久
ファイル情報 ファイル名、番号
異常ないこと 各試験で確認
属性、日付
′ 年 月 日 × 承認
′ 年 月 日 × 承認
′ 年 月 日 × 承認
′ 年 月 日 × - R7 ・ D7000 - 承認
NICS 株式会社 ニ コ ン
VBA29001-R.3814.A
Wiring
1025 1044
1007
Black 1043
Main condenser
1125 1116 1117 1118
Gray
Gray
Orenge
1013
1102 1101 Red Red
PUSH
Bl a c k Bl a c k
Speaker
1104
1058 1042
Mirror UPPI 1015
1032 1035
AFPI Soldering bridge 1038 PUSH
3
PUSH
Shutter unit
3
1004 Green
1030
3
PUSH
Gray Lens release button
1005 Red
Red
1006 Red
1113
1046
1023
Red
Black
- E1 ・ D7000 -
NICS
VBA29001-R.3814.A
Mounting
実装図 Drawing
Battery
EN-EL15 Shutter unit
Hot shoe
#1012
#1110 #1036 5pin 20pin
#1059 TTL
#1043 Main condenser
CN1101 CN3502
SYNC
#1111
Remote control
RDY STOP
Relay PCB #1124
sensor
Main condenser #1011 #1035 BP PCB unit
PCB Battery contact unit CN3501
PopUpMg #1007 Top cover FPC unit
15pin
#1017
#1125
#1116
#1117
ISC-FPC
#1108
#1109
#1103
#1104
#1101
23pin 3pin 3pin
#1002
#1003 SZ PCB unit #1102
CN408
CN1302 CN1304
#1027
DCDC-ISC PCB unit 17pin PD-DCDCISC #1004 CN404
#1013 17pin 15pin
Connection FPC PD PCB unit
SB PCB unit CN201 CN403
#1025 LCDFPC unit 21pin SZ-DCDCISC #1042 CN402
45pin Connection FPC
45pin
Flash monitor SPD CN1303 CN1001 CN1000 17pin
CN1301 #1041 CN202 CN401
61pin CN407 CN406
#1038 TOGO-SB Connection FPC unit #1015 TOGO-SZ Connection FPC TOGO-PD Connection FPC
44pin CN3801 #1123
#1033
33pin 44pin 61pin 2pin 37pin #1122
SQ Motor
Mirror UP Motor
#1039 35pin CN104 #1001 TOGO PCB unit
M
#1112
#1113
#1120
Lens contact
M
Aperture
CN900 CN800 connector
Mg
35pin #1018
CN501 10pin CN103
Lens contact FPC
CN1000 CN1001 CN1200 CN102
#1006 33pin 33pin 61pin 41pin
#1005 MD PCB unit #1024
AFFPC unit f-f0 PCB
TOGO-IF Connection FPC 15pin CN3301
19pin
CN502
Microphone Speaker
unit unit
#1053 #1054
- E2 ・ D7000 -
NICS
VBA29001-R.3814.A
FUSE arrangement
1S460-012
- E3 ・ D7000 -
NICS
VMA29001-R.3814.A
MZ-800SEL
ドライサーフ MZ-800SEL
A
DRYSURF MZ-800SEL
EDB0011
ネジロック (赤) 1401C
A
SCREWLOCK 1401C
TNG-87
サンコール TNG-87
★ A
SANKOL TNG-87
L-271
ロックタイト L-271
A
LOCTITE L-271
LEN317A
グリース LEN317A
A
GREASE LEN317A
汎用品
パーソナルコンピュータ
A USE MARKETED
PERSONAL COMPUTER
PRODUCT.
J65155
カメラ部調整用ソフト
★ A
ADJ. SOFT FOR CAMERA BODY
J65156
撮像部調整用ソフト
★ A
ADJ. SOFT FOR IMAGING
J61247 色調整装置確認ソフト
★ A SOFT FOR COLOR ADJ DEVICE
CHECK
- T1 ・ D7000 -
NICS
VMA29001-R.3814.A
J19123
シャッター試験機 EF-1 (CE)
SHUTTER TESTER EF-1 (CE)
又は [OR] A 又は [OR]
廃番
シャッター試験機 EF-8000
RJNo.is not
available SHUTTER TESTER EF-8000
J63068
輝度計 (BM-3000)
A/S
LUMINANCE METER BM-3000
汎用品
デジタルマルチメータ
A USE MARKETED
Digital meter
PRODUCT.
汎用品
安定化電源 (10 V 5 A )
A USE MARKETED
POWER SUPPLY (10V 5A)
PRODUCT.
J18004 絞りレバー高さ点検工具
A APERTURE LEVER POSITIONING
GAUGE
J18004-1
J18004 用基準ゲージ
S
REFERENCE GAUGE FOR J18004
J19132B
59 ゜測定用ミラー (D300/D200 対応) FOR
59�
° A
MEASUR. USE MIRROR 59(D300/D200) D200 D300
- T2 ・ D7000 -
NICS
VMA29001-R.3814.A
汎用品
ヘクスキー (φ1.5mm)
A USE MARKETED
HEX. KEY WRENCH (φ1.5mm)
PRODUCT.
J19004-1
インジケータ及びスタンド
A
DIAL INDICATOR AND STAND
J18001-1
ボディバック出し工具
A
BODY-BACK FOCUS GAUGE
J19001 ∞合致コリメーターF=600mm
A INFINITY-FOCUS COLLIMATOR
F=600mm
J18394 無限合致調整用スクリーン
FOR
A INFINITY FOCUS ADJUSTMENT
D90
SCREEN
J18010
無限大合致基準レンズ50/1.8
A/S
INFINITY STANDARD LENS 50/1.8
J63119
AE CCD用チャートボード
★ A
AE/CCD-USE CHART BOARD
USBケーブルUC-E4 製品転用
A
USB CABLE UC-E4 USE NIKON PRODUT
J15445
マルチカム 4800DX AFチャート
★ A
MULTI-CAM 4800DX AF CHART
J15409
チャートボード
A
CHART BOARD
- T3 ・ D7000 -
NICS
VMA29001-R.3814.A
J18191
NDフィルター8× 2 枚使用
A
ND FILTER 8x USE TWO FILTERS.
J18266
AF調整用Zレンズ (1m用)
A
ADJUSTMENT Z-LENS (FOR 1m)
J15259
AF調整工具台
A
AF ADJUSTING TOOL
J15280
Zレンズ用支持ホルダー
A
LENS HOLDER
J18230
YAW ・ PITCH工具
A
YAW/PITCH ADJUSTMENT TOOL
J63120
AF X 位置出し工具
★ A
AF X-POSITIONING TOOL
J18267
AF50/1.4D
A
LENS AF50/1.4D
J18498
AF28/2.8D
A
LENS AF28/2.8D
- T4 ・ D7000 -
NICS
VMA29001-R.3814.A
又は [OR] A 又は [OR]
工具設定な
し AF 70- 300/4-5.6D
RJNo.is not LENS AF70-300/4-5.6D
available
※フリッカレス (インバーター)
A
蛍光灯器具
Z-light×2
※ Equivalent fluorescent: Flicker-less
“Inverter“ lighting.
J18393
斜めチャート
A
SLANT CHART
J61185
撮像調整用工具レンズ
A
IMAGING ADJ. TOOL LENS
J63085
フィルター SP1
A
FILTER SP1
J63086
フィルター SP2
A
FILTER SP2
J63087
フィルター SP3
A
FILTER SP3
J61246
D7000 工具ボディ (撮像用基準ボディ)
★ C
D7000 TOOL BODY (FOR IMAGING)
- T5 ・ D7000 -
NICS
VMA29001-R.3814.A
ACアダプター EH-5 製品転用
A
AC ADAPTER EH-5 USE NIKON PRODUCT.
パワーコネクターEP - 5B 製品転用
★ A
AC ADAPTER CONNECTOR EP-5B USE NIKON PRODUCT.
MB-D11 製品転用
★ A
MB-D11 USE NIKON PRODUCT
MS-D11 製品転用
★ A
MS-D11 USE NIKON PRODUCT.
J18360
基準反射布
A
Standard reflector 1.5M ×1.5M
セコニック製 L-758D
推奨
フラッシュメーター (TI-07036 参照)
A
Flash Meter SEKONIC-MADE L758D
IS RECOMMENDED.
(REF. TIE-07036)
汎用品
オシロスコープ
A USE MARKETED
OSCILLOSCOPE
PRODUCT.
3 出力安定化電源 汎用品
A 3-OUTPUT STABILIZED POWER USE MARKETED
SUPPLY PRODUCT.
J61232 イメージセンサークリーニ
ング機能搭載ボディ
電流検出治具
A IMAGE SENSOR
CURRENT DETECTOR
CLEANING FUNCTION
BUILT-IN BODY
J11374
ジャッキ 200 × 200 mm
D
JACK 200×200mm
- T6 ・ D7000 -
NICS
VMA29001-R.3814.A
J63066
D1用フィルターホルダー
A
FILTER HOLDER FOR D1
J63113
SG チャート
A
SG CHART
J63112
色調整装置 付属のフードを使用
A
COLOR ADJUSTING DEVICE USE SUPPLIED HOOD.
J15443
2 ウェイ水準器
A
2WAY LEVEL
J15444
2 ウェイステージ
D
2WAY STAGE
- T7 ・ D7000 -
NICS
Screw sheet
VBA29001-R.3814.A
PARTS NAME Bottom cover unit Rear cover unit Rear FPC unit Selector lock lever TFT monitor LV lever SD cover unit
DISASSEMBLY D3 D4 D6 D7 D8 D8 D9
TYPE OF SCREW #620 #657 #613 #614 #675 #675 #671 #672 #610 #614
QUANTITY 1 7 2 3 1 14 1 4 2 4
PARTS NAME Front cover unit Shield plate TOGO PCB unit Image sensor unit I/F cover unit Grip cover unit Top cover unit
DISASSEMBLY D10 D11 D12 D14 D15 D16 D17 D18
TYPE OF SCREW #611 #614 #683 #617 #683 #678 #629 #622 #613 #557 #613 #623
QUANTITY 2 2 2 1 4 3 2 1 1 1 2 2
ASSEMBLY A85 A84 A71 A69 A64 A63 A63 A62 A61
PARTS NAME SB PCB unit Command dial unit AF assist lamp unit Top LCD unit Power dial Shoe base SB lower case unit
DISASSEMBLY D19 D20 D21 D21 D22 D22 D23 D24 D25 D26 D27
TYPE OF SCREW #635 #635 #629 #700 #701 #635 #696 #693 #650 #654 #629 #650 #630
QUANTITY 3 6 1 1 2 4 2 2 1 4 4 1 2
ASSEMBLY A60 A59 A58 A58 A57 A57 A56 A53 A55 A54 A52 A50
PARTS NAME Top cover FPC unit Release mode dial lock button Separation of Front Body from Rear Body IF PCB unit
DISASSEMBLY D28 D29 D30 D31 D32 D33
TYPE OF SCREW #635 #699 #602 #635 #635 #706 #706 #697 #706 #675
QUANTITY 2 1 1 3 2 2 4 1 2 2
PARTS NAME Battery contact Shutter unit AF sensor unit Separation of Prism Box from Front Body Aperture control unit AF-M lever unit MD PCB unit
DISASSEMBLY D43 D44 D45 D46 D47 D48 D49
TYPE OF SCREW #604 #638 #635 #161 #697 #621 #638 #683
QUANTITY 3 1 2 3 3 4 1 2
PARTS NAME Mirror driving unit Horizontal lever/Vertical lever AF motor unit Bayonet Apertrue couping ring unit Lens contact FPC unit
DISASSEMBLY D50 D50 D51 D52 D53 D54 D56
TYPE OF SCREW #674 #673 #680 #680 #637 #711 #661 #660 #635 #606
QUANTITY 2 1 1 1 2 1 4 1 2 1
PARTS NAME Lens release button unit Mirror driving unit Metering FPC unit LCD unit Eyepiece block unit
DISASSEMBLY D57 D57 D59 D60 D61
TYPE OF SCREW #635 #669 #514 #683 #656 #635
QUANTITY 2 2 3 2 2 2
ASSEMBLY A8 A7 A5 A3 A1
- S2 ・ D7000 -
NICS