You are on page 1of 7

7.

Level 2 Repair

7-1. Components on the Rear Case

7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

7-2. Pre-requisite

Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

Anti-static Mat Glass Absorber

OCTA Disassembly Holder OCTA Disassembly Upper

Ethyl Alcohol Clean Swab

7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

7-3. Parts which must be changed after repair


BOM Discription Picture Remarks

A/S-SVC REPAIR TAPE


ALL

[GH81‐13360A]

Replace when
repair Front part

A/S-SVC REPAIR CU
SHEET ALL

[GH02‐11546A]

7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

7-4. Disassembly

Detach LCD connector 2 1) Put the device in the chamber for 30minutes
1
under 70~80℃
2) Detach the LCD using Vaccum Jig

※ Caution ※ Caution
1) Be careful not to damage OCTA FPCB 1) Be careful not to damage LCD

※ Caution ※ Caution
1) Be care of scratch & molding damage 1) Be care of scratch & molding damage

7-4
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

5 Disassemble PBA Screw1 Point


And Earjack connector.

※ Caution ※ Caution
1) Be care of FPCB damage. 1) Be care of PBA damage

※ Caution ※ Caution
1) Be care of PBA damage 1) Be care of PBA damage

7-5
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

7-5. Aassembly

※ Caution ※ Caution
1) Be care of FPCB Connector 1) Be care of assemble hook.

※ Caution ※ Caution
.-Torque : 1.1 Kgf ·cm 1) Be care of scratch & molding damage

7-6
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

※ Caution ※ Caution
1) Screw Torque : 1.25Kgf ·cm 1) Be care of scratch & molding damage

※ Caution
※ Caution
- Torque : 5~6 Kgf /cm2
1) Be care of scratch & molding damage
- Press time : 11.7sec

7-7
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

You might also like