Professional Documents
Culture Documents
WATER ROCKET
Cut down the line. Break it into half. Cut down the line with a utility
Attach the fins to the bottle. Place knife. Draw a line from the top
the cork and the pump into the bottle corner of the board to the bottom of
and tape the first fin to the side of the board. Draw the fins.
the bottle.
Take the second fin and tape it on the Take the tennis ball and place them
opposite side of the bottle directly on the top of the rocket and tape it
across from the first fin. Tape the down until a solid cone of tape over
third and fourth fins on the open the ball attaching it to the rocket
space on the other sides of the bottle.
Push the cork into the opening of the Put a hole into the cork. Thread the
bottle until a really tight fit. Place the needle of the pump through the
rocket on the ground and pump the hole made in the cork.
bike pump
Cut along the straight line and through Fold it into triangle. Take the top
all layers by cutting slightly inwards. A right corner and fold into a triangle
perfect octagon will be formed. Cut again. Take the left corner and fold it
duct tape across to produce small strips again into another smaller triangle.
for attaching eyelets to the parachute.
Stick them all round. Create eyelets by Attach string to the eyelets. Lift up
using a hole puncher. Use kite strings the strings. Tie a single knot when the
for the parachute. strings are confidently adjusted.
Final Product
Conclusion
Overall, I think the whole project went well, although
there were many hurdles and obstacles, we had to
overcome to complete the project. We are grateful to
our group leader, Yovella Belicia for leading the group
and guiding us throughout the whole project. We are
also thankful to our team members for successfully
building the rocket in such a short period of time.
Special thanks to Jabez Raj from class 2 UUM for
willing to stay back to help the team out to build the
rocket.