Professional Documents
Culture Documents
Operation Guide
I. Brief
3200 series smart LED display units are special design for two wired current
loop, powered by loop power, and no external power needed.
II. Features
1.Using LED to display, and able to used in
dark environment.
2.No external power needed.
3.Able to display measured value like
pressure, temperature and depth etc.
4.Display solution 1/9999.
5.Isolated alarm open drain output.
6.Voltage drop will below 4 volt.
7.With optional maximal 2 alarm
III. Connection
IV. Operation
1.Power on
Connect the display unit into “4-20mA” Loop.
2.Set zero
i. Set the loop current to 4mA.
S E T 2
ii. Keep pressing UP or DOWN until menu
displayed.
iii. Press UP + DOWN to enter zero adjustment, the default value will be
4mA, press UP and DOWN to adjust the display 0 4. 0 0
value.
iv. Press UP + DOWN to save the result.
3. Set full
d A P
i. Keep pressing UP or DOWN until menu displayed
ii. Press UP + DOWN to enter damp time adjustment, the current setting
will be displayed, press UP or DOWN to adjust the position, the valid
range will be 0 ~ 99.99S.
iii. Press UP + DOWN to save the result.
6. Set alarming mode