Professional Documents
Culture Documents
Name
of the
MATERIAL HANDLING VALVE, SIZE- 300 X 150MM
Equipm
ent:
Seat, Material handling valve ACI, Hardness- 325 to 350 BHN,S.S 440C
Gate, Material handling valve SS-410 as per ASTM A-240, Hardness- 300 to 350 BHN,S.S 440C
Slide gate housing (Left), MHV ACI, Min. Hardness- 225 BHN
Slide gate housing (Right), MHV ACI, Min. Hardness- 225 BHN
Name
of the
SEGREGATING VALVE, SIZE- 200 & 250 NB
Equipm
ent:
Seat, Segregating valve, Size- 200 NB ACI, Hardness- 425 to 450 BHN
Gate, Segregating valve, Size- 200 NB SS-410 as per ASTM A-240, Hardness- 335 to 345
Body, Segregating valve, Size- 200 NB ACI, Hardness- 275 to 310 BHN
Seat, Segregating valve, Size- 250 NB ACI, Hardness- 425 to 450 BHN
Gate, Segregating valve, Size- 250 NB SS-410 as per ASTM A-240, Hardness- 335 to 345
Body, Segregating valve, Size- 250 NB ACI, Hardness- 275 to 310 BHN
Elbow, Radius- 3D, 22.5 degree, 200 NB, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 90 degree, 200 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 45 degree, 200 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 22.5 degree, 200 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 90 degree, 250 NB, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 45 degree, 250 NB, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 22.5 degree, 250 NB, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 200 X 200 X 150 NB, 45 degree, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 200 X 200 X 150 NB, 45 degree, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 200 X 200 X 200 NB, 45 degree, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 200 X 200 X 200 NB, 45 degree, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 250 X 250 X 250 NB, 45 degree, Short length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Lateral, 400 X 400 X 400 NB, 45 degree, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 90 degree, 300 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 45 degree, 300 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 90 degree, 350 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 90 degree, 400 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Elbow, Radius- 3D, 45 degree, 400 NB, Standard length NI- CHROME- ACI, Hardness- 500 to 550 BHN
Ash intake tee, 300 X 300 X 200NB NI- CHROME- ACI, Hardness- 500 to 550 BHN
Reducer 250 X 200 NB NI- CHROME- ACI, Hardness- 500 to 550 BHN
Fixed bearing end cone CI, IS 210 Gr. FG-260 with 2% Ni,S.S 304
Floating bearing end cone CI, IS 210 Gr. FG-260 with 2% Ni,S.S 304
CI, IS 210 Gr. FG-260 with 2% Ni,MOC : CI With 2% NI with SS – 304
Fixed bearing end head
Cladding.(08mm)
CI, IS 210 Gr. FG-260 with 2% Ni,MOC : CI With 2% NI with SS – 304
Floating bearing end head
Cladding.(08mm)
Name HYDRO EJECTOR, SIZE- 8"
of the
Intermediate wear piece ACI as per IS 4771, type 1(A), Minimum 4.5% Ni, Hardness- 500 BHN
Equipm
ent:
Throat ACI as per IS 4771, type 1(A), Minimum 4.5% Ni, Hardness- 500 BHN
Throat increaser ACI as per IS 4771, type 1(A), Minimum 4.5% Ni, Hardness- 500 BHN
V-BELT
V-BELT 1. WEDGE BELTS CONFIRMING TO IS 2494
2. MASS PER UNIT LENGTH- 0.348 KG
3. BELT SHOULD MEET HMLS POLYSTER CABLE CORD
4. ASPECT RATIO- T/W- 0.8
5. BELT HAS TO MEET HIGHER BELT VELOCITY OF RECOMMENDED LIMIT
OF 40 M/SEC