Professional Documents
Culture Documents
V1.1
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
I
7.1.13 CHG-PORTLOCATING【Change Port Identification】 ...........................7-50
7.1.14 CHG-PORT-DHCP【Modify port of DHCP】 .........................................7-57
7.1.15 CHG-PORT-PPPOEPLUS【Modify Port PPPoE Plus Information】 ........7-61
7.1.16 CHG-ONUVOIPIP【Change ONU VoIP IP】 ........................................7-66
7.1.17 DLT-ONUVOIPIP【Delete ONU VoIP IP Configuration】 ........................7-70
7.1.18 CRT-ONUSIPUSER【Create ONU SIP User】 .....................................7-72
7.1.19 DLT-ONUSIPUSER【Delete ONU SIP User】 ......................................7-75
7.1.20 CHG-ONU-STAT-PON【Change ONU Administrative Status】 ...............7-77
7.1.21 RST-ONU-PON【Restart ONU】 ........................................................7-79
7.1.22 ACT-LANPORT【Activate LAN Port】..................................................7-81
7.1.23 DACT-LANPORT【Deactivate LAN Port】 ...........................................7-82
7.1.24 ACT-VOIPPORT【Activate VoIP Port】................................................7-84
7.1.25 DACT-VOIPPORT【Deactivate VoIP Port】 .........................................7-86
7.1.26 CHG-ONUWANIP【Change WAN IP configuration】 .............................7-88
7.1.27 DLT-ONUWANIP【Delete WAN IP Configuration】................................7-95
7.1.28 CHG-ONUWAN【Change WAN configuration】 ....................................7-98
7.1.29 DLT-ONUWAN【Delete WAN configuration】 ..................................... 7-102
7.1.30 CRT-ONU-GEMPORT【Create ONU GEM Port】 ............................... 7-103
7.1.31 DLT-ONU-GEMPORT【Delete ONU GEM Port】 ................................ 7-106
7.1.32 CRT-ONU-MVLAN【Create ONU MVLAN】 ....................................... 7-109
7.1.33 DLT-ONU-MVLAN【Delete ONU MVLAN】 ....................................... 7-111
7.1.34 CRT-ONU-PPPOE【Create ONU PPPoE】........................................ 7-114
7.1.35 CRT-ONU-SERVICE【Create ONU Service】 ................................... 7-116
7.1.36 DLT-ONU-SERVICE【Delete ONU Service】 ..................................... 7-120
7.1.37 CRT-ONU-STATICROUTE【Create ONU Static Route】 ..................... 7-122
7.1.38 CRT-ONU-TCONT【Create ONU T-CONT】 ...................................... 7-125
7.1.39 DLT-ONU-TCONT【Delete ONU T-CONT】 ....................................... 7-128
7.1.40 CRT-ONU-GEMPORT【Create ONU GEM Port】 ............................... 7-130
7.1.41 DLT-ONU-GEMPORT【Delete ONU GEM Port】 ................................ 7-133
7.1.42 CRT-ONU-VPORTGEMPORTMAPPING【Create ONU VPort and
GEM Port Mapping】 ........................................................................ 7-136
7.1.43 CRT-ONUPORT-EXTENDEDVLANRULE【Create ONU Port Extended
VLAN Rule】 ................................................................................... 7-139
7.1.44 CRT-ONUPORT-EXTENDEDVLAN【Create ONU Port Extended
VLAN】 ........................................................................................... 7-141
7.1.45 CRT-ONUPORT-IGMP【Create ONU Port IGMP】 ............................. 7-143
7.1.46 DLT-ONUPORT-IGMP【Delete ONU Port IGMP】 .............................. 7-146
II
7.1.47 CRT-ONUPORT-VLANTRANSLATION【Create ONU Port VLAN
Translation】.................................................................................... 7-149
7.1.48 DLT-ONUPORT-VLANTRANSLATION【Delete ONU Port VLAN
Translation】.................................................................................... 7-151
7.1.49 CHG-ONU-BRGPORT【Change ONU Bridge Port】 .......................... 7-154
7.1.50 CHG-ONU-TARGETSTAT【Change ONU Target Status】 ................... 7-156
7.1.51 CHG-ONU-VIDEOANI【Change ONU Video ANI Configuration】 ......... 7-158
7.1.52 CHG-ONU-VPORT【Change ONU VPort】 ....................................... 7-161
7.1.53 CHG-ONUGEMPORT-QOS【Change ONU GEM Port QoS】 .............. 7-163
7.1.54 CHG-ONUPORT-VLAN【Change ONU Port VLAN】.......................... 7-166
7.1.55 CHG-ONUVIDEOPORT【Change ONU Video Port】 .......................... 7-169
7.1.56 CHG-ONU-VOIP【Change ONU VoIP】 ............................................ 7-171
7.1.57 CLR-ONU-CONFDATA【Clear ONU Configuration Data】 ................... 7-176
7.1.58 BND-ONU-DHCPSERVERPROFILE【Bind DHCP Server Profile to
ONU】 ............................................................................................ 7-178
7.1.59 UBND-ONU-DHCPSERVERPROFILE【Unbind DHCP Server Profile
from ONU】 ..................................................................................... 7-180
7.1.60 BND-ALARMPROFILE【Bind Alarm Profile】 ..................................... 7-182
7.1.61 UBND-ALARMPROFILE【Unbind Alarm Profile】 ............................... 7-186
7.1.62 UBND-ONUPORT-VLAN【Unbind VLAN from ONU Port】 ................. 7-189
7.1.63 BND-ONUPORT-VLAN【Bind ONU Port to VLAN】 ........................... 7-192
7.1.64 CHG-BOARD-ROGUEONUDETECT【Change Rogue ONU Detecting
Configuration】 ................................................................................ 7-194
7.1.65 CHG-ONU-ACS【Change ONU ACS】.............................................. 7-196
7.1.66 CHG-ONU-ETHPORT【Change ONU Ethernet Port】........................ 7-200
7.1.67 CHG-ONU-IPV4IPHOST【Change ONU IPv4 IP Host
Configuration】 ................................................................................ 7-203
7.1.68 CHG-ONU-VEIP【Change ONU VEIP】 ........................................... 7-206
7.1.69 CHG-ONUPORT-MVLANTAGMODE【Change ONU Port MVLAN
Tag】 .............................................................................................. 7-209
7.1.70 CHG-ONUPORT-PACKETFILTER【Change ONU Port Packet
Filter】 ............................................................................................ 7-211
7.1.71 BND-ONU-ONUPROFILE【Bind ONU Profile to ONU】 ...................... 7-214
7.1.72 UBND-ONU-ONUPROFILE【Unbind ONU Profile from ONU】............. 7-217
7.1.73 RESTORE-ONUFACTORYCONF【Restore ONU Factory
Settings】........................................................................................ 7-219
7.1.74 CHG-ONUUNI-PON【Change ONU UNI Configuration】..................... 7-221
7.1.75 UPDATE-ONU-SOFTWARE【Update ONU Software】 ....................... 7-226
7.1.76 CHG-ONUWIFI【Change ONU WiFi configuration】 ........................... 7-228
III
7.1.77 CHG-ONUWIFISSID【Change WiFi SSID】 ....................................... 7-232
7.1.78 CRT-ONU-MGCUSER【Create ONU MGC User】.............................. 7-238
7.1.79 DLT-ONU-MGCUSER【Delete ONU MGC User】............................... 7-241
7.1.80 DLT-ONU-STATICROUTE【Delete ONU Static Route】...................... 7-244
7.1.81 CRT-ONU-TCONTBWPROFILE【Create ONU TCONT Bandwidth
Profile】 .......................................................................................... 7-246
7.1.82 DLT-ONU-TCONTBWPROFILE【Delete ONU TCONT Bandwidth
Profile】 .......................................................................................... 7-251
7.1.83 CRT-ONU-WANIP【Create ONU WAN IP】 ....................................... 7-253
7.1.84 CRT-ONUPROFILE【Create ONU Profile】 ....................................... 7-258
7.1.85 DLT-ONUPROFILE【Delete ONU Profile】 ........................................ 7-260
7.1.86 CHG-ONU-DMZ【Change ONU Demilitarized Zone】 ......................... 7-262
7.1.87 CHG-ONU-UPNP【Change ONU UPnP Configuration】 ..................... 7-264
7.1.88 CRT-ONU-PORTFORWARD【Create ONU Port Forward】 ................. 7-266
7.1.89 DLT-ONU-PORTFORWARD【Delete ONU Port Forward】 .................. 7-269
7.1.90 CHG-ONU-PON【Change ONU Configuration】................................. 7-271
7.2 Resource and Query ......................................................................................7-275
7.2.1 LST-DEVINFO【Query Device Information】........................................ 7-275
7.2.2 LST-BRDINFO【Query Board Information】......................................... 7-278
7.2.3 LST-OLTATTR-PON【Query PON Port Attributes】............................... 7-281
7.2.4 LST-ONU【Query ONU Information】 ................................................. 7-284
7.2.5 LST-ONUSTATE【Query ONU State】 ................................................ 7-291
7.2.6 LST-SERVICEPORT【List Service Port】 ............................................ 7-295
7.2.7 LST-PORTQOS-PRIPRF【List Port QoS Priority Profile】 ..................... 7-302
7.2.8 LST-PORT-MAXLEARNTMAC【Query Port Maximum Number of Learnt
MAC Addresses】 ............................................................................ 7-305
7.2.9 LST-PORTQOS-TRAFFICPRF【Retrieve Port QoS Traffic Profile】........ 7-310
7.2.10 LST-ONUTCONT【Query ONU TCONT Configuration】...................... 7-315
7.2.11 LST-ONUCFG【Query ONU Configuration Information】 ..................... 7-318
7.2.12 LST-OMDDM【Query Optical Module DDM Information】 .................... 7-321
7.2.13 LST-LANPORT【Query LAN Port Information】 .................................. 7-329
7.2.14 LST-LANPERF【Query LAN Port Performance】 ................................ 7-336
7.2.15 LST-PONPERF【Query PON Link Performance】 .............................. 7-339
7.2.16 LST-UNREGONU【Query Unregistered ONU Status Information】 ....... 7-344
7.2.17 LST-ONU-SERVICE【Query ONU Service Configuration】 .................. 7-350
7.2.18 LST-ONU-VIDEOANI【Query ONU Video ANI Configuration】 ............. 7-354
7.2.19 LST-ONU-VLANTRANSLATION【Query ONU VLAN Translation】 ....... 7-357
7.2.20 LST-ONU-VPORT【Query ONU VPort Configuration】........................ 7-361
IV
7.2.21 LST-ONU-VPORTGEMPORTMAPPING【Query ONU VPort and GEM
Port Mapping】 ................................................................................ 7-363
7.2.22 LST-ONUGEMPORT【Query ONU GEM Port Configuration】 ............. 7-366
7.2.23 LST-ONU-SIPUSER【Query the Information of ONU SIP User】 .......... 7-369
7.2.24 LST-ONUPORT-VLAN【Query ONU Port VLAN】 .............................. 7-374
7.2.25 LST-ONU-EXTENDEDVLAN【Query ONU Extended VLAN
Configuration】 ................................................................................ 7-378
7.2.26 LST-ONU-EXTENDEDVLANRULE【Query ONU Extended VLAN Rule
Configuration】 ................................................................................ 7-383
7.2.27 LST-ONU-VOIP【Query ONU VoIP Configuration】 ............................ 7-386
7.2.28 LST-ONU-VOIPIP【Query ONU VoIP IP Configuration】 ..................... 7-392
7.2.29 LST-ONU-IPV4IPHOST【Query ONU IPv4 IP Host】 .......................... 7-401
7.2.30 LST-OLTMACADDRESS【Query OLT Learnt MAC Address】 ............. 7-405
7.2.31 LST-PORTMACADDRESS【List Mac address of ONU UNI】............... 7-408
7.2.32 LST-VLANID【List VLAN ID】........................................................... 7-415
7.2.33 LST-ONU-ONUPROFILE【Query ONU Profile of ONU Binding】 ......... 7-417
7.2.34 LST-ONUPROFILE【Query ONU Profile】 ......................................... 7-420
7.2.35 LST-ONUWANIP【Query ONU WAN IP】 .......................................... 7-423
7.2.36 LST-ONU-VOIPLINESTAT【Query ONU VoIP Line Status】 ................ 7-429
7.2.37 LST-ONUUNI-PON【List ONU UNI Information】 ............................... 7-433
7.2.38 LST-ONU-DETAIL【Query ONU Detail】 ........................................... 7-436
7.2.39 LST-VLANID-TTP【List VLAN ID】 ................................................... 7-444
7.2.40 LST-ONU-WIFI【Query ONU WiFi】 ................................................. 7-447
7.2.41 LST-ONU-WIFISSID【Query ONU WiFi SSID】.................................. 7-451
7.2.42 LST-TCONTBWPROFILE【Query TCONT Bandwidth Profile】 ............ 7-456
7.2.43 LST-ONUSIPPROFILE【Query ONU SIP Profile】.............................. 7-460
7.2.44 LST-ONUTYPEPROFILE【Query ONU Type Profile Information】........ 7-464
7.3 Alarm .............................................................................................................7-469
7.3.1 LST-ALARM【List Alarms】 ............................................................... 7-469
7.4 System ...........................................................................................................7-473
7.4.1 LOGIN【Login EMS】 ....................................................................... 7-473
7.4.2 LOGOUT【Logout EMS】 .................................................................. 7-475
7.4.3 SHAKEHAND【Shakehand Command】 ............................................. 7-476
V
Chapter 1
Document Overview
Table of Contents
Purpose .....................................................................................................................1-1
Scope.........................................................................................................................1-1
1.1 Purpose
This document describes how to use TL1 northbound interface (NBI) of Network Element
Management System(EMS) NetNumenU31 for ZTE's access network equipment. The
partner management system can use this interface to integrate with NetNumenU31.
1.2 Scope
This document describes TL1 NBI, including the usage, protocol, functionalities and details
about TL1 command for network element (NE) management. But this document doesn't
describe details of TL1 protocol and communication technology.
1-1
2-1
3-1
Please pay attention to the change of RID field position and the new-added ALARM field.
In this case, the TL1 client should be self-adaptive to these changes.
3-2
NetNumenU31 TL1 supports connection based on SSH in order to enhance the security
of communication.
l Communication Module
4-1
Before sending TL1 command, the OSS needs to built a connection with the TCP of
NetNumenU31 TL1 interface module (ZTE TL1 Agent) through SOCKET. The default
TL1 service port of ZTE TL1 Agent is 9819-9833 and the default SSH service port is
8819-8833.
l Session Control
The maximum of TL1 connection that can support simultaneously is 50.
l Running Efficiency
Generally, it needs 1-10 sec to run a single TL1 command. In case of large scale network
management, the OSS should build multi TL1 connections to send TL1 command
concurrently so as to improve the running efficiency of TL1 command.
6 + Suffix, meaning the content in round a(bc) + means abc or abcbc etc.
brackets could be showed for one or more
times.
7 ^ Space character
8 cr Enter key
9 1f Change line
10 | Choose one of the items from several a|b|c means to choose one from a,
items separated by this kind of symbol. b and c.
4-2
11 ::= Separate two different block messages. Such as <digit> ::= (0|1|...|9) ,
meaning the value of <digit>
should be one of the integer
coming from 0 to 9 (here, including
0 and 9).
4-3
4-4
quotedline
The quoted line consists of parsable text and shall be preceded and followed by double
quotes.
The famat is :
< totalrecord =total-count><cr><lf><result>
Here, result is :
<cr><lf><title><cr><lf>(<->*)<cr><lf>(<attribs>((<values>)*))(<->*)<cr><lf><cr><lf>
-attribs::=<attrib>((^^<attrib>)*)<cr><lf>
-values::=<value>((^^<value>)*)<cr><lf>
·Terminator
The form of the terminator is :
<cr><lf>( ; | > )
The terminator is represented by either the semicolon (;) character or the greater than
(>) character. The semicolon (;) character is used to indicate the termination of the output
response message. The greater than (>) character is used to indicate that more output
associated with this response will follow under another header.
Since the size of the output message should not exceed 4096 bytes, it is important to
split the response into blocks with the same Ctag. The (>) terminator is also used for
intermediate responses in a timed measurement series.
4.2.2.3 Example
Function: Retrieve all NEs from EMS.
Command Format:
LST-DEV::[ (DID=device-id)| (DIP=device-IP)|(DNAME=device-name)]:CTAG::;
Here:
LST-DEV is command name.
DID, DIP and DNAME are three different optional parameters. When there is no any
message input in this parameter item, all of the equipment information will be returned.
Input:
LST-DEV:::5::;
Response:
736 2004-04-01 10:55:49
M 1 COMPLD
EN=0 ENDESC=No error
totalrecord =2
List of All Device Info
4-5
————————————-
DID DIP DNAME DTYPE STATUS LOCATION
10.71.47.30 10.71.47.30 TEST ZXDSL9210 Up root.Shanghai.Pudong.Zhangjiang
10.71.47.31 10.71.47.31 TEST2 ZXDSL9210 Down root.Shanghai.Xinming
————————————-
Note:
This command tries to inquire all of the NE information. That is why there is no any
parameter input.
4-6
4-7
Tips:
If you find that the DOS window can't display the response result of TL1 command, then
you can configure the DOS window to echo mode to resolve this problem.
4-8
4-9
Dxxx: Device
Exxx: Exception
Sxxx: System
Axxx: Authentication
Txxx: Test
5-1
xDSL-MDU ZXDSL9806H/ZXDSL9806I/ZXDSL9812/ZXDSL9816/ZXDSL9836/ZXDSL9856/
Series ZXA10 9806V/ZXA10 9818/ZXA10 9836V/ZXA10 9852V
LAN-MDU F402/F802/F803/F803V1/F803V3/F803G-8/F803-8/F803G-16/F803-
Series 16/F804/F805/F805PB/F806PB/F809/F821/F822/F822B/F822P/F823/F823P/F-
829/F822P/F832/F833/F839
6-1
l Command Format
ADD-ONU::OLTID=olt-name,PONID=ponport_location:CTAG::[AUTHTYPE=auth-type],
ONUID=onu-index[,PWD=onu-password][,ONUNO=onu-no]
[,RID=rid][,HEXPWD=hex-password][,NAME=name]
[,DESC=onu description],ONUTYPE=onu-type[,SPLITTERID=id];
l Operated Target Identifier
7-1
l Command Parameter
7-2
l Response Format
None.
l Error Code
DDOF, IIPE
7-3
None.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CFG-ONU::OLTID=olt-name,PONID=ponport_location,ONUIDTYPE=onuid-type,
ONUID=onu-index:CTAG::AUTHTYPE=auth-type[,AUTHINFO=onu-index][,PWD=password]
[,RID=rid];
7-4
l Command Parameter
7-5
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CFG-ONU::OLTID=10.63.194.46,PONID=1-1-8-1,ONUIDTYPE=LOID,
ONUID=8981720182101:CTAG::AUTHTYPE=LOID,
AUTHINFO=089866666666,PWD=17445245;
Response :
ZTE_PONOAM 2013-10-31 14:55:48
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change LOID and LOID Password.
Command 2:
CFG-ONU::OLTID=10.63.194.46,PONID=1-1-8-1,
ONUIDTYPE=ONU_NUMBER,ONUID=2:CTAG::AUTHTYPE=SNRID,
AUTHINFO=ZTEG10012454,RID=5452354;
Response :
ZTE_PONOAM 2014-11-31 16:25:21
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-6
Remark:
This command is used to change SN and RID.
l Average Command Response Time
l Notes
Point Details
l Revision History
【Delete ONU】
7.1.3 DEL-ONU【 】
l Description
This command is used for deleting ONU.
l Applicable NE
l Command Format
DEL-ONU::OLTID=olt-name,PONID=ponport_location:CTAG::ONUIDTYPE=onuid-type,
ONUID=onu-index;
7-7
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time
7-8
l Notes
Point Details
l Revision History
l Command Format
CRT-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::SERVICEPORTID=service-port-id
[,VIFTYPE=virtual-interface-type][,VIFID=virtual-interface-id],
MODE=mode[,DESC=desc][,ADMINSTAT=admin-status][,USERVID=user-vid]
[,USERSVID=user-svid][,USERCOS=user-cos]
[,USERETHERTYPE=user-ether-type][,USERDEFETHERTYPE=user-define-ether-type]
[,USERETHERTYPEFILTER=user-ether-type-filter]
[,ALLOWEDETHERTYPE=allowed-ether-type]
[,ALLOWEDUSERDEFETHERTYPE=allowed-user-define-ether-type]
[,STARTUSERVID=start-user-vid][,ENDUSERVID=end-user-vid][,USERDSCP=user-dscp]
[,NETWORKCVID=network-cvid][,NETWORKCTAGCOS=network-ctag-cos]
[,NETWORKSVID=network-svid][,NETWORKSTAGCOS=network-stag-cos]
[,TLSSVID=tls-svid][,TLSCVID=tls-cvid]
[,INGRESSTRAFFICPRF=ingress-traffic-prf]
[,EGRESSTRAFFICPRF=egress-traffic-prf]
[,QOSQUEUEID=qos-queue-id][,VLANMERGE=vlan-merge];
7-9
OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the Conditions: Must choose
MacAddress ONU while DID or one between PID and OID
SN/LOID/Pass- DNAME indicates
word the OLT device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-10
7-11
7-12
C300v3.0/C320v2.0/
C320v3.0/C300Mv4/
C350Mv4 when mode
is:
Priority
TagAndCosPriority
VlanRangeTagAnd-
Cos
7-13
7-14
7-15
C320v3.0/C300Mv4/
C350Mv4 when mode
is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
7-16
7-17
7-18
7-19
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=1,VIFTYPE=VPort,VIFID=1,MODE=Untag,
DESC=UntagDesc,NETWORKCVID=100,NETWORKSVID=120;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 1, VPort is 1, MODE is Untag,
NETWORKCVID is 100, NETWORKSVID is 120.
No.2 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=2,VIFTYPE=VPort,VIFID=1,MODE=TagAndEtherType,
DESC=TagAndEtherTypeDesc,USERVID=100,USERETHERTYPE=UserDefined,
7-20
USERDEFETHERTYPE=0x8180,USERETHERTYPEFILTER=Enable,NETWORKCVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 2, VPort is 1, MODE is TagAndEtherType,
USERVID is 100, USERDEFETHERTYPE is 0x8180,
USERETHERTYPEFILTER is enabled, NETWORKCVID is 200.
No.3 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=3,VIFTYPE=VPort,VIFID=1,
MODE=VlanRangeTag,DESC=VlanRangeTagDesc,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 3, VPort is 1, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, NETWORKSVID is 200.
No.4 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=4,VIFTYPE=VPort,VIFID=2,MODE=Tag,USERVID=20,
NETWORKCVID=30,EGRESSTRAFFICPRF=0G_2G,QOSQUEUEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
7-21
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 3, VPort is 1, MODE is Tag, USERVID is 20,
NETWORKCVID is 30, EGRESSTRAFFICPRF is 0G_2G, and QOSQUEUEID is 1.
No.5 Command :
CRT-SERVICEPORT::DID=10.63.196.151,OID=1-1-2-1-1:5::
SERVICEPORTID=2,VIFTYPE=VPort,VIFID=1,MODE=VlanRangeTag,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.196.151,
and SERVICEPORTID is 2, VPort is 1, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, and NETWORKSVID is 200.
No.6 Command :
CRT-SERVICEPORT::DID=10.63.196.151,PID=1-1-2-1:5::
SERVICEPORTID=2,MODE=VlanRangeTag,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2016-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.196.151,
and SERVICEPORTID is 2, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, and NETWORKSVID is 200.
l Average Command Response Time
7-22
l Notes
Point Details
l Revision History
l Command Format
7-23
CHG-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::SERVICEPORTID=service-port-id
[,INGRESSTRAFFICPRF=ingress-traffic-prf][,EGRESSTRAFFICPRF=egress-traffic-prf]
[,NETWORKCTAGCOS=network-ctag-cos][,NETWORKSTAGCOS=network-stag-cos]
[,DESC=desc];
l Operated Target Identifier
l Command Parameter
7-24
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IDNE, IRNE, IMP, IIPE, DDNS, DDOF, EEH
l Example
7-25
Command 1:
CHG-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=3,
INGRESSTRAFFICPRF=INTEST,EGRESSTRAFFICPRF=EGTEST;
Response:
0 2014-10-28 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the configuration of Rack1/Shelf1/Slot6/Port1/ONU1
/ServicePort3 on NE 10.63.204.165.
Command 2:
CHG-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=3,
NETWORKSTAGCOS=5;
Response:
0 2015-12-25 00:00:00
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
CHG-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=3,
NETWORKSTAGCOS=5;
Response:
0 2016-05-27 00:00:00
M 5 COMPLD
;
Remark:
7-26
CHG-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=3,
DESC=Test;
Response:
0 2016-09-19 15:33:07
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the description of
Rack1/Shelf1/Slot6/Port1/ServicePort3 on NE 10.63.204.165.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-27
l Command Format
DLT-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::
SERVICEPORTID=service-port-id;
l Operated Target Identifier
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
7-28
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete service port 1 on 10.63.204.165.
Command 2:
DLT-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=1;
Response:
0 2016-05-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete service port 1 on 10.63.204.165.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-29
l Command Format
CHG-SERVICEPORTSTAT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::
SERVICEPORTID=service-port-id,ADMINSTAT=admin-status;
l Operated Target Identifier
7-30
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-SERVICEPORTSTAT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=1,ADMINSTAT=Disable;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to disable service port 1 on 10.63.204.165.
Command 2:
CHG-SERVICEPORTSTAT::DID=10.63.204.165,PID=1-1-6-1:5::
SERVICEPORTID=1,ADMINSTAT=Disable;
7-31
Response:
0 2016-05-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to disable service port 1 on 10.63.204.165.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
7-32
BND-PORT-MVLAN::(DID=device-id|DNAME=device-name),(PID=port-id)|(OID=onuid[,
ONUPORT=onu-port]):CTAG::MVLANID=mvlan-id[,
(VINTERFACE=vinterfaceid|VPI=vpi,VCI=vci)][,BINDTYPE=1/2][,
PROTOCOLTYPE=IGMP/MLD];
l Operated Target Identifier
OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must choose
MacAddress while DID or DNAME one between PID and
SN/LOID/Pass- indicates the OLT OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-33
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IDNE、IRNE、IMP、IIPE、DDNS、DDOF、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
BND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-7-1:5::MVLANID=200,BINDTYPE=1;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
7-34
Remark:
This command is used to bind Rack1/Shelf1/Slot7/Port1 as a source port to MVLAN
200 on NE 10.61.94.77.
No.2 Command :
BND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-3-11:5::MVLANID=200,BINDTYPE=2;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind Rack1/Shelf1/Slot3/Port11 as a receiving port to
MVLAN 200 on NE 10.61.94.77.
No.3 Command :
BND-PORT-MVLAN::DID=10.61.94.77,OID=1-1-2-1-1:5::MVLANID=200,
VINTERFACE=3,BINDTYPE=2,PROTOCOLTYPE=MLD;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind Rack1/Shelf1/Slot2/Port1/ONU1/VPort3 as a receiving
port to MVLAN 200 on NE 10.61.94.77.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-35
l Command Format
UBND-PORT-MVLAN::(DID=device-id|DNAME=device-name),(PID=port-id)|(OID=onu-id[,
ONUPORT=onu-port]):CTAG::MVLANID=mvlan-id[,
(VINTERFACE=vinterface-id|VPI=vpi,VCI=vci)][,BINDTYPE=1/2][,
PROTOCOLTYPE=IGMP/MLD];
l Operated Target Identifier
7-36
OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must
MacAddress while DID or DNAME choose one between
SN/LOID/Pass- indicates the OLT PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-37
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IDNE、IRNE、IMP、IIPE、DDNS、DDOF、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
UBND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-7-1:5::MVLANID=200,BINDTYPE=1;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind Rack1/Shelf1/Slot7/Port1 from MVLAN 200 on NE
10.61.94.77.
No.2 Command :
UBND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-3-11:5::MVLANID=200,VINTERFACE=1,
BINDTYPE=2;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind Rack1/Shelf1/Slot3/Port11 from MVLAN 200 on NE
10.61.94.77.
No.3 Command :
7-38
UBND-PORT-MVLAN::DID=10.61.94.77,OID=1-1-2-1-1:5::
MVLANID=200,VINTERFACE=3,BINDTYPE=2,PROTOCOLTYPE=MLD;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind Rack1/Shelf1/Slot2/Port1/ONU1/VPort3 from
MVLAN 200 on NE 10.61.94.77.
l Average Command Response Time
l Notes
Point Details
l Revision History
MSAN MSAG5200/MSAG5200V3/MSAG5208/C300M
Series/C300Mv4 Series
7-39
l Command Format
CHG-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),
(PID=port-id|([PID=port-id,]OID=onu-id[,ONUPORT=onu-port])):CTAG::
VINTERFACETYPE=virtual-interface-type,(SVLANID=svlan-id[,CVLANID=cvlan-
id]|VINTERFACEID=vinterface-id,| (VPI=vpi,VCI=vci))[,DIRECTION=direction],
TRAFFICPRF=traffic-profile-name;
l Operated Target Identifier
PID String rack-shelf- Port ID (e.g 1-1-3-5) Case 1: PID. PID Required
slot-port Case 2: [PID,]OID. PID
Optional, OID Required
OID String rack-shelf- ONU ID. It's used to Case 1: PID. PID Required
slot-port-onu identify the ONU while Case 2: [PID,]OID. PID
MacAddress DID or DNAME indicates Optional, OID Required
SN/LOID/Pa- the OLT device.
ssword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-40
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IIAC, IMP, IIPE, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=VLAN,SVLANID=5,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/SVLANID5 on 10.63.174.29.
No.2 Command :
7-41
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VINTERFACEID=1,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/BrgPort1 on 10.63.174.29.
No.3 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81,DIRECTION=Egress,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/BrgPort(8/81) on 10.63.174.29.
No.4 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,OID=1-1-3-1-1:5::
VINTERFACETYPE=VPort,VINTERFACEID=1,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/ONU1/VPort1 on 10.63.174.29.
l Average Command Response Time
7-42
l Notes
Point Details
l Revision History
l Command Format
DLT-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id,ONUPORT=onu-port)):CTAG::VINTERFACETYPE=virtual-interface-type,
(SVLANID=svlan-id[,CVLANID=cvlan-id]|VINTERFACEID=vinterface-id,|
(VPI=vpi,VCI=vci))[,DIRECTION=direction];
7-43
OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while DID Conditions: Must choose
MacAddress or DNAME indicates the one between PID and OID
SN/LOID/Pa- OLT device.
ssword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-44
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IIAC, IMP, IIPE, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=VLAN,SVLANID=5;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/SVLANID5 on 10.63.173.29.
No.2 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/BrgPort1 on 10.63.173.29.
7-45
No.3 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81,DIRECTION=Egress;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/BrgPort(8/81) on 10.63.173.29.
No.4 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,OID=1-1-3-1-1:5::
VINTERFACETYPE=VPort,VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
l Notes
Point Details
l Revision History
7-46
l Command Format
CHG-PORT-MAXLEARNTMAC::(DID=device-id|DNAME=device-name),(PID=port-
id|([PID=port-id,]OID=onu-id[,ONUPORT=onu-port])):CTAG::[VIFTYPE=virtual-interface-type,][(VI
7-47
OID String rack-shelf-slot-port- ONU ID. It's used Case 1: PID. PID
onu to identify the ONU Required
MacAddress while DID or DNAME Case 2: [PID,]OID.
SN/LOID/Password indicates the OLT PID Optional, OID
device. Required
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-48
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IDNE、DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,OID=1-1-1-1-1:5::VIFID=1,
MACLIMITSTAT=Enable,MAXLEARNTMAC=10;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No error
;
Remark:
This command is used to set maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot1/Port1/ONU1/VPort1 to 10 on 10.61.94.33.
No.2 Command :
CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,OID=1-1-1-1-1:5::VIFTYPE=VPort,VIFID=1,
MACLIMITSTAT=Disable;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No error
;
Remark:
This command is used to disable MAC address limit of
Rack1/Shelf1/Slot1/Port1/ONU1/VPort1 on 10.61.94.33.
No.3 Command :
CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,PID=1-1-1-1:5::VLANID=20,
MACLIMITSTAT=Enable,MAXLEARNTMAC=10;
Response:
0 2004-04-01 10:55:49
7-49
M 5 COMPLD
EN=0 ENDESC=No error
;
Remark:
This command is used to set maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot1/Port1/VLAN20 to 10 on 10.61.94.33.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
7-50
CHG-PORTLOCATING::(DID=device-id|DNAME=device-name),(PID=port-id|OID=oid):
CTAG::[VIFTYPE=virtual-interface-type,][(VIFID=vinterface-id|SERVICENAME=service-name)]
[,FORMAT=format-value][,REMOTEIDSTAT=remoteid-status][,REMOTEIDNAME=
remoteid-name][,REMOTEIDPRF=remoteid-profile][,DHCPSYNTAXPRF=dhcp-syntax-profile,
PPPOESYNTAXPRF=pppoe-syntax-profile];
l Operated Target Identifier
OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while Conditions:Must choose
MacAddress DID or DNAME indicates one between PID and
SN/LOID/Pas- the OLT device. OID
sword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-51
7-52
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORTLOCATING::DID=10.63.196.242,OID=1-1-1-2-1:CTAG::VIFID=1,
FORMAT=DSL-FORUM,REMOTEIDSTAT=Enable,REMOTEIDNAME=test;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot1/Port2
Onu1 on 10.63.196.242.
No.2 Command :
CHG-PORTLOCATING::DID=10.63.196.242,OID=1-1-1-3-1:CTAG::VIFID=1,
FORMAT=DSL-FORUM,REMOTEIDSTAT=Enable;
Response:
7-53
7-54
;
Remark:
This command is used to change the port identification of
Rack1/Shelf1/Slot3/Port1/Pvc2 on 10.63.194.43. AAA is the syntax profile name.
No.6 Command :
CHG-PORTLOCATING::DID=10.63.174.165,PID=1-1-3-1:CTAG::VIFID=1,
FORMAT=FLEXIBLE-SYNTAX,DHCPSYNTAXPRF=TestDhcp,
PPPOESYNTAXPRF=TestPppoe;
Response:
This command is used to change the DHCP and PPPoE syntax profile of
Rack1/Shelf1/Slot3/Port1 on 10.63.174.165.
No.7 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-4-1:CTAG::FORMAT=AAA;
Response:
ZTE-EB9A30BF27A 2013-04-25 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot4/Port1
on 10.63.194.43. AAA is the syntax profile name.
No.8 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-4-1:CTAG::REMOTEIDPRF=–;
Response:
Remark:
7-55
;
Remark:
This command is used to change the port identification of
Rack1/Shelf1/Slot3/Port1/Onu1/ServiceName HIS on 10.63.194.43. AAA is the
syntax profile name.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-56
l Applicable NE
l Command Format
CHG-PORT-DHCP::(DID=device-id|DNAME=device-name),(PID=port-id|OID=oid):CTAG::
[VIFTYPE=virtual-interface-type,][(VIFID=vinterface-id|SERVICENAME=service-name),]
[OPTION82STAT=option82-status][,SNOOPINGSTAT=snooping-status]
[,TRUSTSTAT=trust-status][,TRUSTPOLICY=policy-value];
l Operated Target Identifier
7-57
l Command Parameter
7-58
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-1-2-1:5::VIFID=1,
SNOOPINGSTAT=Enable;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot1/Port2
ONU 1 VPort 1 on NE 10.63.196.242.
No.2 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-3-1:5::VIFID=1,OPTION82STAT=Enable;
7-59
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot3/Port1
BridgePort 1 on NE 10.63.196.242.
No.3 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-1-2-1:5::VIFID=1,OPTION82STAT=Enable,
TRUSTSTAT=Trust,TRUSTPOLICY=Keep;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot1/Port2
ONU 1 VPort 1 on NE 10.63.196.242.
No.4 Command :
CHG-PORT-DHCP::DID=DID=10.63.194.46,OID=1-1-17-1-1:5::VIFTYPE=ServicePort,
VIFID=1,OPTION82STAT=Disable,SNOOPINGSTAT=Enable,TRUSTSTAT=Untrust,
TRUSTPOLICY=Add;
Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot17/Port1
ONU 1 ServicePort 1 on NE 10.63.194.46.
No.5 Command :
CHG-PORT-DHCP::DID=10.63.194.46,OID=1-1-17-1-1:5::VIFTYPE=VPort,SERVICENAME
=HIS,OPTION82STAT=Disable,SNOOPINGSTAT=Enable,
TRUSTSTAT=Untrust,TRUSTPOLICY=Add;
Response:
7-60
l Notes
Point Details
l Revision History
7-61
l Command Format
CHG-PORT-PPPOEPLUS::(DID=device-ID|DNAME=device-name),
(PID=portid|OID=oid):CTAG::[VIFTYPE=virtual-interface-type,]
(VIFID=vinterface-id|SERVICENAME=service-name),STATUS=pppoeplus-status
[,TRUSTSTAT=trust-status,TRUSTPOLICY=trust-policy];
l Operated Target Identifier
l Command Parameter
7-62
l Response Format
l Response Parameters
None.
l Error Code
7-63
7-64
l Notes
Point Details
l Revision History
7-65
l Command Format
CHG-ONUVOIPIP::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],VLANPROFILENAME=
vlan-profile-name,(IPHOSTID=iphost-id|IPV6HOSTID=ipv6-host-id),
IPMODE=ip-mode[,IPPROFILENAME=ip-profile-name]
[,IP=ip-address][,IPPREFIXLENGTH=ip-prefix-length][,PPPOEUSER=pppoe-user]
[,PPPOEPWD=pppoe-pwd][,ONUIDENTIFIER=onu-identifier];
l Operated Target Identifier
7-66
l Command Parameter
7-67
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=Static,
IPPROFILENAME=ipProfile,IP=10.63.204.220,IPPREFIXLENGTH=24;
Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 2:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=zte123;
Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-68
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 3:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 4:
CHG-ONUVOIPIP::DID=10.63.156.26:CTAG::ONUPROFILENAME=remote-profile,
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=Static,IPPROFILENAME=
ipProfile,IP=10.63.204.220,IPPREFIXLENGTH=24;
Response:
ZTE-SH10083644D01 2017-04-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify VoIP IP of ONU profile remote-profile on NE
10.63.156.26.
Command 5:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPMODE=DHCP,IPV6HOSTID=1;
Response:
ZTE-SH10083644D01 2018-08-28 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
7-69
l Notes
Point Details
l Revision History
l Command Format
DLT-ONUVOIPIP::(DID=device-ID|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
7-70
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUVOIPIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
7-71
l Notes
Point Details
l Revision History
7-72
l Command Format
CRT-ONUSIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::USERPHONE=user-phone,
[SIPPROFILENAME=sip-profile-name][,USERNAME=user-name][,
AUTHUSERNAME=auth-user-name][,AUTHPASSWORD=auth-password][,
MEDIAPROFILENAME=media-profile-name];
l Operated Target Identifier
l Command Parameter
7-73
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUSIPUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
USERPHONE=12354678,SIPPROFILENAME=testSipProfile,USERNAME=sip001,
AUTHUSERNAME=uer1,AUTHPASSWORD=aa;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
7-74
l Notes
Point Details
l Revision History
l Command Format
DLT-ONUSIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id,
ONUPORT=onu-port:CTAG::;
l Operated Target Identifier
7-75
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUSIPUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response::
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-76
Remark:
This command is used to delete the ONU SIP user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-STAT-PON::(DID=device-ID|DNAME=device-name),OID=onu-ID:
CTAG::STATUS=adminstatus;
l Operated Target Identifier
7-77
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-STAT-PON::DID=10.46.41.14,OID=1-1-8-1-1:CTAG::STATUS=Enable;
应答:
NETSH180492D1 2012-07-04 16:54:48
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to enable administrative status of
Rack1/Shelf1/Slot8/Port1/ONU1 on 10.46.41.14.
l Average Command Response Time
7-78
l Notes
Point Details
l Revision History
NetNumenU31R20V12.14.20T70 2014–02–20
【Restart ONU】
7.1.21 RST-ONU-PON【 】
l Description
l Command Format
RST-ONU-PON::(DID=device-ID|DNAME=device-name) ,OID=onu-id:CTAG::;
l Operated Target Identifier
7-79
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
RST-ONU-PON::DID=10.46.41.14,OID=1-1-6-1-1:CTAG001::;
Response:
XUZHILU 2012-02-10 16:38:06
M Ctag001 COMPLD
EN=0 ENDESC=No Error;
Remark:
This command is used to restart Rack1/Shelf1/Slot6/Port1/ONU1 on OLT 10.46.41.14.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-80
l Command Format
ACT-LANPORT::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier
7-81
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-82
l Command Format
DACT-LANPORT::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,ONUIDTYPE=o
l Operated Target Identifier
7-83
l Response Format
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Notes
Point Details
l Revision History
7-84
l Command Format
ACT-VOIPPORT::ONUIP=onu-name|[OLTID=olt-name,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier
7-85
l Response Format
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Notes
Point Details
l Revision History
7-86
l Command Format
DACT-VOIPPORT::ONUIP=onu-name|[OLTID=olt-name,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier
7-87
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-88
l Command Format
CHG-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::(IPHOSTID=iphost-id|IPV6HOSTID=ipv6-host-id)[,IPMODE=ip-mode]
[,ONUIDENTIFIER=onu-identifier] [,IP=ip-address][,IPMASKLEN=ip-mask-length]
[,(IPPROFILENAME=ip-profile-name|IPGATEWAY=ip-gateway)][,PPPOEUSER=pppoe-user]
[,PPPOEPWD=pppoe-pwd] (,VLANPROFILENAME=vlan-profile-name|VID=vlan-id)
[,PPPOEMODE=pppoe-mode][,PPPOESERVICENAME=pppoe-service-name];
l Operated Target Identifier
l Command Parameter
7-89
7-90
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=ztewan,VLANPROFILENAME=VLAN100;
7-91
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 2:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=ztewan,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 3:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=DHCP,
VLANPROFILENAME=VLAN100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 4:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,
IPMODE=DHCP,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
7-92
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 5:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=Static,
IP=10.63.204.220,IPGATEWAY=10.63.204.254,IPMASKLEN=24,
VLANPROFILENAME=VLAN100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 6:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=Static,
IP=10.63.204.220,IPGATEWAY=10.63.204.254,IPMASKLEN=24,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 7:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME=VLAN100,
IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,PPPOEPWD=ztewan,
PPPOESERVICENAME=servicewan;
Response:
ZTE-SH10083644D01 2017-02-27 10:41:22
7-93
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE,
PPPoE service name is servicewan.
Command 8:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=ztewan,VLANPROFILENAME=VLAN100,IPV6HOSTID=1;
Response:
ZTE-SH10083644D01 2018-08-28 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IPv6 Host ID is 1.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-94
l Applicable NE
l Command Format
DLT-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name],(IPHOSTID=iphost-id|IPV6HOSTID=ipv6-host-id);
l Operated Target Identifier
7-95
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
7-96
l Example
Command 1:
DLT-ONUWANIP::DID=10.63.194.46,OID=1-1-5-7-1:CTAG::IPHOSTID=2;
Response:
ZTE-SH10083644D01 2014-03-18 10:01:22
M CTAG COMPLD
l Notes
Point Details
l Revision History
l Command Format
CHG-ONUWAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::WANID=wan-id[,IPHOSTID=iphost-id|IPV6HOSTID=ipv6-host-id],SERVICETYPE=
service-type[,UNILIST=uni-list][,SSIDLIST=ssid-list][,MVLAN=mvlan-id];
l Operated Target Identifier
7-98
l Command Parameter
7-99
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUWAN::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WANID=1,IPHOSTID=1,
SERVICETYPE=Internet;
Response:
ZTE-SH10083644D01 2013-12-17 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure routed WAN 1 in Port1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and set associated IP Host to IP
Host 1, set service type to Internet. This WAN does not associate with any SSIDs or
UNI ports.
Command 2:
CHG-ONUWAN::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WANID=1,SERVICETYPE=Internet,
7-100
UNILIST=1/2,SSIDLIST=1;
Response:
ZTE-SH10083644D01 2013-12-17 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure bridged WAN 1 in Port1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, set service type to Internet. This
WAN associates with SSID 1 and UNI port 1,2.
Command 3:
CHG-ONUWAN::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WANID=1,SERVICETYPE=Internet,IP
Response:
ZTE-SH10083644D01 2018-08-28 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure routed WAN 1 in Port1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, set service type to Internet and
set associated IP Host to IPv6 Host1. This WAN does not associate with any SSIDs
or UNI ports.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-101
l Command Format
DLT-ONUWAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:
CTAG::WANID=wan-id;
l Operated Target Identifier
l Command Parameter
7-102
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUWAN::DID=10.63.194.46,OID=1-1-5-7-1:CTAG::WANID=1;
Response:
ZTE-SH10083644D01 2014-03-18 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete WAN 1 configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on OLT 10.63.194.46.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-103
l Command Format
CRT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],ONUGEMPORTID=onu-gemport-id,
TCONTID=tcont-id[,GEMPORTNAME=gemport-name][,ADMINSTAT=administrative-status]
[,GEMPORTID=gemport-id]
[,TCONTQUEUE=tcont-queue][,USTRAFFICPROFILENAME=upstream-traffic-profile-name]
[,DSTRAFFICPROFILENAME=downstream-traffic-profile-name];
l Operated Target Identifier
l Command Parameter
7-104
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
TCONTID=1,USTRAFFICPROFILENAME=5M,DSTRAFFICPROFILENAME=10M;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
7-105
l Notes
Point Details
l Revision History
7-106
l Applicable NE
l Command Format
DLT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name,]ONUGEMPORTID=onu-gemport-id;
l Operated Target Identifier
l Command Parameter
7-107
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
l Example
Command 1:
DLT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
DLT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
Remark:
7-108
This command is used to delete a GEM port from ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CRT-ONU-MVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],MVLAN=mvlan;
l Operated Target Identifier
7-109
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-MVLAN::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::MVLAN=100;
Response:
0 2015-05-20 10:55:49
7-110
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a MVLAN of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.51.
Command 2:
CRT-ONU-MVLAN::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
MVLAN=100;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an MVLAN of ONU profile remote-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-111
l Applicable NE
l Command Format
DLT-ONU-MVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name,]MVLAN=mvlan;
l Operated Target Identifier
OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the Conditions:Must choose
MacAddress ONU while DID or one between OID and
SN/LOID/Pass- DNAME indicates ONUPROFILENAME
word the OLT device.
(e.g. 1-1-1-2-1
00-18-FE-7C-
64-E4
ZTEG54998768)
l Command Parameter
7-112
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-MVLAN::DID=10.63.204.233,OID=1-1-5-7-1:CTAG:::MVLAN=100;
Response:
0 2016-05-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a MVLAN of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 2:
DLT-ONU-MVLAN::DID=10.63.204.233:CTAG:::ONUPROFILENAME=remote-profile,MVLAN=10
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a MVLAN 100 from ONU profile remote-profile on NE
10.63.204.233.
7-113
l Notes
Point Details
l Revision History
l Command Format
CRT-ONU-PPPOE::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::IPHOSTID=iphost-id[,NATENABLE=nat-enable][,
PPPOEMODE=pppoe-mode][,CONNECTTYPE=connection-type]
[,RELEASETIME=release-time],USERNAME=user-name,PASSWORD=password;
l Operated Target Identifier
7-114
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
7-115
l Notes
Point Details
l Revision History
l Command Format
7-116
CRT-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],SERVICENAME=service-name,
ONUGEMPORTID=gemport-id,MAPPINGTYPE=mapping-type[,COS=cos][,VID=vlan-id]
[,ONUPORT=onu-port];
l Operated Target Identifier
l Command Parameter
7-117
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
SERVICENAME=service,ONUGEMPORTID=1,MAPPINGTYPE=VLAN,VID=100;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
7-118
7-119
l Notes
Point Details
l Revision History
l Command Format
DLT-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name,]SERVICENAME=service-name;
l Operated Target Identifier
7-120
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::SERVICENAME=iptvService;
Response:
0 2016-09-06 10:55:49
M CTAG COMPLD
7-121
l Notes
Point Details
l Revision History
7-122
l Command Format
CRT-ONU-STATICROUTE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],DESTIPADDRESS=
destination-ip-address,DESTIPMASK=destination-ip-mask,NEXTHOPIPADDRESS=
next-hop-ip-address [,OUTPUTPORT=output-port];
l Operated Target Identifier
l Command Parameter
7-123
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-STATICROUTE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0,
NEXTHOPIPADDRESS=192.168.4.1, OUTPUTPORT=10;
Response:
0 2015-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU static route of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
7-124
CRT-ONU-STATICROUTE::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0,
NEXTHOPIPADDRESS=192.168.4.1, OUTPUTPORT=10;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a static route of ONU profile remote-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
7-125
CRT-ONU-TCONT::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],
TCONTID=tcont-id[,TCONTNAME=tcont-name][,
BANDWIDTHPROFILENAME=bandwidth-profile-name] [,ALLOCID=alloc-id];
l Operated Target Identifier
l Command Parameter
7-126
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-TCONT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::TCONTID=1,
BANDWIDTHPROFILENAME=5M;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU T-CONT of Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.204.51.
Command 2:
CRT-ONU-TCONT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,TCONTID=1,
BANDWIDTHPROFILENAME=5M;
Response:
0 2017-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a T-CONT of ONU profile line-profile on NE
10.63.204.51.
7-127
l Notes
Point Details
l Revision History
l Command Format
DLT-ONU-TCONT::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name,]TCONTID=tcont-id;
l Operated Target Identifier
7-128
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-TCONT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::TCONTID=1;
Response:
0 2016-10-31 10:55:49
7-129
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU T-CONT of
Rack1/Shelf1/Slot5/Port7/ONU1/TCONT1 on 10.63.204.51.
Command 2:
DLT-ONU-TCONT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,TCONTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a T-CONT from ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-130
l Command Format
CRT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],ONUGEMPORTID=onu-gemport-id
TCONTID=tcont-id[,GEMPORTNAME=gemport-name][,ADMINSTAT=administrative-status]
[,GEMPORTID=gemport-id]
[,TCONTQUEUE=tcont-queue][,USTRAFFICPROFILENAME=upstream-traffic-profile-name]
[,DSTRAFFICPROFILENAME=downstream-traffic-profile-name];
l Operated Target Identifier
l Command Parameter
7-131
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
TCONTID=1,USTRAFFICPROFILENAME=5M,DSTRAFFICPROFILENAME=10M;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
7-132
l Notes
Point Details
l Revision History
7-133
l Applicable NE
l Command Format
DLT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name,]ONUGEMPORTID=onu-gemport-id;
l Operated Target Identifier
l Command Parameter
7-134
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
l Example
Command 1:
DLT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
DLT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
Remark:
7-135
This command is used to delete a GEM port from ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CRT-ONU-VPORTGEMPORTMAPPING::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::VPORTID=vport-id,ONUGEMPORTID=gemport-id[,COS=cos][,VID=vlan-id];
7-136
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
7-137
CRT-ONU-VPORTGEMPORTMAPPING::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
VPORTID=1,ONUGEMPORTID=2;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a mapping between VPort 1 and GEM port 2 of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.204.233.
Command 2:
CRT-ONU-VPORTGEMPORTMAPPING::DID=10.63.204.233,OID=1-1-5-7-1
:CTAG::VPORTID=1,ONUGEMPORTID=2,COS=7,VID=1066;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a mapping with CoS(7) and VLAN(1066) between
VPort 1 and GEM port 2 of Rack1/ Shelf1/Slot5/Port7/ONU1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-138
l Command Format
CRT-ONUPORT-EXTENDEDVLANRULE::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],
FILTERRULENAME=filter-rule-name,TREATMENTRULENAME=treatment-rule-name;
l Operated Target Identifier
7-139
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPORT-EXTENDEDVLANRULE::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:
CTAG::PORTTYPE=Ethernet,FILTERRULENAME=filterRule,TREATMENTRULENAME
=treatmentRule;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-140
Remark:
This command is used to create an extended VLAN rule of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CRT-ONUPORT-EXTENDEDVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],DSMODE=downstream-mode;
l Operated Target Identifier
7-141
l Command Parameter
l Response Format
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
7-142
l Example
Command 1:
CRT-ONUPORT-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,DSMODE=InverseUpstream;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the extended VLAN information of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port1 on 10.63.204.51.
l Notes
Point Details
l Revision History
l Command Format
7-143
CRT-ONUPORT-IGMP::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],
IGMPPROFILENAME=igmp-profile-name[,MAXGROUPNUM=max-group-number]
[,MAXBANDWIDTH=max-bandwidth][,BANDWIDTHENFORCE=bandwidth-enforce];
l Operated Target Identifier
l Command Parameter
7-144
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
IGMPPROFILENAME=igmpProfile,MAXGROUPNUM=100;
Response:
0 2015-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create IGMP information of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.51.
7-145
Command 2:
CRT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=VEIP,IGMPPROFILENAME=igmpProfile,MAXGROUPNUM=100;
Response:
0 2016-05-23 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create IGMP information of
Rack1/Shelf1/Slot5/Port7/ONU1/VEIP port 1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
7-146
DLT-ONUPORT-IGMP::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier
l Command Parameter
l Response Format
7-147
l Notes
Point Details
7-148
l Revision History
l Command Format
CRT-ONUPORT-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],USERVID=user-vid
[,USERCOS=user-cos]([,CVID=cvid][,SVID=svid])[,CTAGCOS=ctag-cos]
[,STAGCOS=stag-cos];
l Operated Target Identifier
7-149
l Command Parameter
l Response Format
7-150
l Notes
Point Details
l Revision History
7-151
l Applicable NE
l Command Format
DLT-ONUPORT-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],USERVID=user-vid
[,USERCOS=user-cos];
l Operated Target Identifier
l Command Parameter
7-152
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUPORT-VLANTRANSLATION::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:
CTAG::PORTTYPE=Ethernet,USERVID=115;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete VLAN translation of Rack1/
Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
7-153
l Revision History
l Command Format
CHG-ONU-BRGPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[UPBWPRF=up-bandwidth-profile-name][,
DOWNBWPRF=down-bandwidth-profile-name];
7-154
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-BRGPORT::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
UPBWPRF=5M,DOWNBWPRF=10M;
Response:
7-155
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change rate limiting of Rack1/
Shelf1/Slot5/Port7/ONU1/bridge port 1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-TARGETSTAT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::TARGETSTAT=target-status;
7-156
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-TARGETSTAT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
TARGETSTAT=OMCIReady;
Response:
7-157
0 2014-12-22 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ONU target status of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-VIDEOANI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::[ADMINSTAT=admin-status][,AGCMODE=agc-mode,AGC=agc];
l Operated Target Identifier
7-158
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
DDOF, IIPE, EEH
7-159
7-160
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-VPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onuid:
CTAG::VPORTID=vport-id[,MAPPINGTYPE=mapping-type][,VPORTNAME=vport-name];
7-161
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-VPORT::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
VPORTID=1,MAPPINGTYPE=VLAN;
Response:
7-162
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure VLAN mapping type of Rack1/
Shelf1/Slot5/Port7/ONU1/VPort1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONUGEMPORT-QOS::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::ONUGEMPORTID=onu-gemport-id[,ONUPORT=onu-port]
[,USPRI0QUEUE=upstream-priority0–queue][,USPRI1QUEUE=upstream-priority1–queue]
[,USPRI2QUEUE=upstream-priority2–queue][,USPRI3QUEUE=upstream-priority3–queue]
[,USPRI4QUEUE=upstream-priority4–queue][,USPRI5QUEUE=upstream-priority5–queue]
[,USPRI6QUEUE=upstream-priority6–queue][,USPRI7QUEUE=upstream-priority7–queue];
7-163
l Command Parameter
7-164
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUGEMPORT-QOS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
ONUPORT=1,DSQUEUE=2;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the QoS information of
Rack1/Shelf1/Slot5/Port7/ONU1/GEM port1 on 10.63.204.51.
Command 2:
CHG-ONUGEMPORT-QOS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
USPRI0QUEUE=0,USPRI1QUEUE=0,USPRI2QUEUE=1,
USPRI3QUEUE=1,USPRI4QUEUE=2,USPRI5QUEUE=2,
USPRI6QUEUE=3,USPRI7QUEUE=3;
Response:
0 2018-11-1 10:55:49
7-165
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the QoS information of
Rack1/Shelf1/Slot5/Port7/ONU1/GEM port1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,
7-166
OID=onu-id],ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name]
[,PORTTYPE=port-type][,VLANMODE=vlan-mode][,PVID=pvid][,COS=cos];
l Operated Target Identifier
OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the ONU Conditions:Must
MacAddress while DID or DNAME choose one
SN/LOID/Pass- indicates the OLT between OID and
word device. ONUPROFILENAME
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-167
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VLANMODE=Hybrid,PVID=115,COS=4;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to set VLAN mode to hybrid of Rack1/
Shelf1/Slot5/Port7/ONU1/ETHUNI1 on 10.63.204.233,and PVID is set to 115,CoS
is set to 4.
Command 2:
CHG-ONUPORT-VLAN::DID=10.63.204.233,ONUPORT=1:CTAG::ONUPROFILENAME=
remote-profile,PORTTYPE=Ethernet,VLANMODE=Hybrid,PVID=115,COS=4;
Response:
7-168
0 2017-04-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify Ethernet port 1 VLAN information of ONU profile
remote-profile on NE 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONUVIDEOPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::ADMINSTAT=admin-status;
l Operated Target Identifier
7-169
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
7-170
Command 1:
CHG-ONUVIDEOPORT::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
ADMINSTAT=Enable;
Response:
0 2014-11-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to enable the administrative status of Rack1/
Shelf1/Slot5/Port7/ONU1/Video Port1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-VOIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name][,PROTOCOLTYPE=protocol-type]
[,USEDCONFMETHOD=used-conf-method][,H248REGMODE=h248-reg-mode]
7-171
[,ONUDOMAIN=onu-domain][,H248EQUIPMENTNAME=h248-equipment-name]
[,MGCREGMODE=mgc-reg-mode][,LINENAMESN=line-name-sn]
[,IPALLOCATINGMODE=ip-allocating-mode][,CONFSVRADDRESS=conf-svr-address]
[,CONFSVRVALIDATIONSCHEME=conf-svr-validation-scheme]
[,CONFSVRUSERNAME=conf-svr-user-name][,CONFSVRPASSWORD=conf-svr-password]
[,CONFSVRREALM=conf-svr-realm];
l Command Parameter
7-172
7-173
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=SIP;
Response:
0 2016-02-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the VoIP protocol type of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
:
Command 2:
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=SIP,
7-174
USEDCONFMETHOD=OMCI,IPALLOCATINGMODE=Single,CONFSVRADDRESS=10.63.204.5
CONFSVRVALIDATIONSCHEME=MD5,CONFSVRUSERNAME=zte,CONFSVRPASSWORD=zt
CONFSVRREALM=@zte;
Response:
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark::
This command is used to change the SIP VoIP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
:
Command 3:
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=H.248,
H248REGMODE=IPv4,ONUDOMAIN=ztedomain,H248EQUIPMENTNAME=zteequip,
CONFSVRADDRESS=10.63.204.5,CONFSVRVALIDATIONSCHEME=Disable;
Response:
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the H.248 VoIP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
:
Command 4:
CHG-ONU-VOIP::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
PROTOCOLTYPE=MGCP,MGCREGMODE=Wildcard,LINENAMESN=ztezte,
CONFSVRADDRESS=10.63.204.5,CONFSVRVALIDATIONSCHEME=Basic,
CONFSVRUSERNAME=zte,CONFSVRPASSWORD=zte;
Response:
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
7-175
This command is used to change the MGCP VoIP information from ONU profile
remote-profile on NE 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CLR-ONU-CONFDATA::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::;
l Operated Target Identifier
7-176
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CLR-ONU-CONFDATA::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
0 2015-08-20 10:55:49
M CTAG COMPLD
7-177
l Notes
Point Details
l Revision History
l Command Format
BND-ONU-DHCPSERVERPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::DHCPSERVERPROFILENAME=dhcpserver-profile-name;
l Operated Target Identifier
7-178
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
Command 1:
BND-ONU-DHCPSERVERPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DHCPSERVERPROFILENAME=testDhcpServerProfile;
7-179
Response:
0 2015-05-13 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind DHCP server profile testDhcpServerProfile to
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
UBND-ONU-DHCPSERVERPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;
l Operated Target Identifier
7-180
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONU-DHCPSERVERPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-181
Remark:
This command is used to unbind DHCP server profile form
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
NE NE Type Notes
Category
l Command Format
BND-ALARMPROFILE::(DID=device-id|DNAME=device-name)[,BID=board-id|[,P-
ID=port-id][,OID=onu-id[,ONUPORT=onu-port]]]:CTAG::ALARMPROFILENAME=al-
arm-profile-name;
l Operated Target Identifier
7-182
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Example
Command 1:
7-183
BND-ALARMPROFILE::DID=10.63.194.46:CTAG::ALARMPROFILENAME=alarm-
profile-Ne;
Response:
xuzhilu-PC 2014-10-22 10:44:33
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Ne to OLT 10.63.194.46.
Command 2:
BND-ALARMPROFILE::DID=10.63.194.46,BID=1-1-5:CTAG::ALARMPROFILE-
NAME=alarm-profile-Board;
Response:
xuzhilu-PC 2014-10-22 10:46:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Board to Rack1/Shelf1/Slot5
on OLT 10.63.194.46.
Command 3:
BND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2:CTAG::ALARMPROFILE=a-
larm-profile-Port;
Response:
xuzhilu-PC 2014-10-22 10:51:45
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Port to
Rack1/Shelf1/Slot5/Port2 on OLT 10.63.194.46.
:
Command 4:
BND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10:CTAG::ALARMPROFILE-
NAME=alarm-profile-ONU;
7-184
Response:
xuzhilu-PC 2014-10-22 10:51:45
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONU to
Rack1/Shelf1/Slot5/Port2/ONU10 on OLT 10.63.194.46.
:
Command 5:
BND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2,OID=ZTEG0A2B3366:CT-
AG::ALARMPROFILENAME=alarm-profile-ONU;
Response:
xuzhilu-PC 2014-10-22 10:58:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONU to ONU of
Rack1/Shelf1/Slot5/Port2 on OLT 10.63.194.46.
:
Command 6:
BND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10,ONUPORT=2:CT-
AG::ALARMPROFILENAME=alarm-profile-ONUPORT;
Response:
xuzhilu-PC 2014-10-22 11:02:16
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONUPORT to
Rack1/Shelf1/Slot5/Port2/ONU10/ONUPORT2 on OLT 10.63.194.46.
7-185
Notes
Point Details
Revision History
NE NE Type Notes
Category
l Command Format
UBND-ALARMPROFILE::(DID=device-id|DNAME=device-name)[,BID=board-id|[,P-
ID=port-id][,OID=onu-id[,ONUPORT=onu-port]]]:CTAG::;
l Operated Target Identifier
7-186
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Defination for more details.
l Example
Command 1:
UBND-ALARMPROFILE::DID=10.63.194.46:CTAG::;
Response:
xuzhilu-PC 2014-10-22 11:04:11
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-187
Remark:
This command is used to unbind alarm profile from OLT 10.63.194.46.
Command 2:
UBND-ALARMPROFILE::DID=10.63.194.46,BID=1-1-5:CTAG::;
Response:
xuzhilu-PC 2014-10-22 11:12:32
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5 on OLT
10.63.194.46.
Command 3:
UBND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2:CTAG::;
Response:
xuzhilu-PC 2014-10-22 11:15:15
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5/Port2 on OLT
10.63.194.46.
:
Command 4:
UBND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10:CTAG::;
Response:
xuzhilu-PC 2014-10-22 11:20:51
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5/Port2/ONU10
on OLT 10.63.194.46.
:
Command 5:
UBND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2,OID=ZTEG0A2B3366:CTAG::;
7-188
Response:
xuzhilu-PC 2014-10-22 11:22:17
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from ONU of Rack1/Shelf1/Slot5/Port2
on OLT 10.63.194.46.
:
Command 6:
UBND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10,ONUPORT=2:CTAG::;
Response:
xuzhilu-PC 2014-10-22 11:23:36
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from
Rack1/Shelf1/Slot5/Port2/ONU10/ONUPORT2 on OLT 10.63.194.46.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-189
l Command Format
UBND-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],VID=vid;
l Operated Target Identifier
l Command Parameter
7-190
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VID=115;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind VLAN 115 from Rack1/
Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-191
l Command Format
BND-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],VID=vid;
l Operated Target Identifier
7-192
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
BND-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VID=115;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind VLAN 115 to Rack1/ Shelf1/Slot5/Port7/ONU1/Ethernet
port 1 on 10.63.204.233.
7-193
l Notes
Point Details
l Revision History
l Command Format
CHG-BOARD-ROGUEONUDETECT::(DID=device-id|DNAME=device-name),
BID=board-id:CTAG::DETECTSTAT=detect-status[,LOCATINGSTAT=locating-status]
[,AUTOSHUTDOWNSTAT=auto-shutdown-status];
7-194
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-BOARD-ROGUEONUDETECT::DID=10.63.204.233,
BID=1-1-5:CTAG::DETECTSTAT=Enable,LOCATINGSTAT=Enable,
AUTOSHUTDOWNSTAT=Enable;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the regue ONU detecting of Rack1/ Shelf1/Slot5
on 10.63.204.233.
7-195
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-ACS::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],
ADMINSTAT=administrative-status,VALIDATIONSCHEME=validation-scheme,
TAGTYPE=tag-type[,URI=uri][,USERNAME=user-name][,PWD=password]
[,REALM=realm]
[VID=vlan-id][,PRIORITY=priority];
7-196
l Command Parameter
7-197
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-ACS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ADMINSTAT=Enable,
VALIDATIONSCHEME=Disable,TAGTYPE=Tagged,URI=10.2.3.6,VID=100,
PRIORITY=7;
Response:
0 2016-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ACS configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51(administrative status is enable,
tag type is Tagged, URI is 10.2.3.6,
7-198
7-199
0 2017-07-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ONU ACS of ONU profile remote-profile on NE
10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-ETHPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id,
ONUPORT=onu-port:CTAG::[ADMINSTAT=admin-status][,DUPLEXSPEED=duplex-speed];
l Operated Target Identifier
7-200
l Command Parameter
7-201
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-ETHPORT::DID=10.63.204.233,OID=1-1-6-1-1,ONUPORT=1:CTAG::
DUPLEXSPEED=Full1000M;
Response:
0 2016-09-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ethernet port duplex and speed of
Rack1/Shelf1/Slot6/Port1/ONU1/UNI1 on 10.63.204.233.
Command 2:
CHG-ONU-ETHPORT::DID=10.63.204.233,OID=1-1-6-1-1,ONUPORT=1:CTAG::
ADMINSTAT=Enable,DUPLEXSPEED=Full1000M;
Response:
0 2016-09-26 10:55:49
M CTAG COMPLD
7-202
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-IPV4IPHOST::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-
id:CTAG::IPHOSTID=iphost-id[,IPOPTIONS=ip-options][,ONUIDENTIFIER=onu-identifier]
[,IP=ip][,IPMASK=ip-mask][,GATEWAY=gateway][,PRIMARYDNS=primary-dns]
[,SECONDARYDNS=secondary-dns];
l Operated Target Identifier
7-203
l Command Parameter
7-204
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
DDOF, IIPE, EEH
1:CTAG::IPHOSTID=1,IPOPTIONS=EnableDHCP/RespondPing/RespondTraceRoute,
ONUIDENTIFIER=test,IP=10.1.2.3,IPMASK=255.255.255.0,GATEWAY=10.1.2.1,
PRIMARYDNS=10.1.3.1,SECONDARYDNS=10.1.3.2;
Response:
0 2016-05-10 15:29:24
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change IP host configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-205
l Command Format
CHG-ONU-VEIP::(DID=device-id|DNAME=device-name)[,PID=portid],OID=onu-id,
ONUPORT=onu-port:CTAG::[ADMINSTAT=admin-status]
[,INTERDOMAINNAME=interdomain-name][,PORTASSIGNENABLE=port-assign-enable]
[,PROTOCOLTYPE=protocol-type][,ASSIGNEDPORT=assigned-port][,IPHOSTID=iphost-id];
l Operated Target Identifier
7-206
l Command Parameter
7-207
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
ADMINSTAT=Enable,INTERDOMAINNAME=domain,
PORTASSIGNENABLE=Enable,PROTOCOLTYPE=UDP,
ASSIGNEDPORT=1000,IPHOSTID=1;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change VEIP configuration of
Rack1/Shelf1/Slot5/Port7/ONU1/VEIP1 on 10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-208
l Command Format
CHG-ONUPORT-MVLANTAGMODE::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id],ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name],
MVLANTAGMODE=mvlan-tag-mode;
l Operated Target Identifier
7-209
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUPORT-MVLANTAGMODE::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
MVLANTAGMODE=Stripped;
Response:
0 2016-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the MVLAN tag mode of
Rack1/Shelf1/Slot5/Port7/ONU1/ONU Port1 on 10.63.204.51.
7-210
Command 2:
CHG-ONUPORT-MVLANTAGMODE::DID=10.63.204.51,ONUPORT=1:CTAG::
ONUPROFILENAME=remote-profile,MVLANTAGMODE=Stripped;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify MVLAN tag mode of ONU profile remote-profile on
NE 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-211
l Command Format
CHG-ONUPORT-PACKETFILTER::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type][,IPV4MULTICAST=
ipv4-multicast][,IPV6MULTICAST=ipv6-multicast][,IPV4BROADCAST=ipv4-broadcast]
[,RARP=rarp][,IPX=ipx][,NETBEUI=netbeui][,APPLETALK=apple-talk][,BPDU=bpdu]
[,ARP=arp][,PPPOE=pppoe];
l Command Parameter
7-212
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
l Example
Command 1:
CHG-ONUPORT-PACKETFILTER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=2
:CTAG::PORTTYPE=Ethernet,IPV4MULTICAST=Forward,BPDU=Discard;
7-213
Response:
0 2016-11-10 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the packet filter of
Rack1/Shelf1/Slot5/Port7/ONU1/UNI2 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
BND-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::(ONUPROFILENAME=onu-profile-name
|(ONULINEPROFILENAME=onu-line-profile-name,ONUREMOTEPROFILE-
NAME=onu-remote-profile-name));
l Operated Target Identifier
7-214
l Command Parameter
ONULINE- String SIZE(1-32) ONU Line Profile Name Required Under Cer-
PROFILE- tain Conditions:Must
NAME choose one between
ONUPROFILENAME
and (ONULINE-
PROFILENAME,
ONUREMOTEPRO-
FILENAME)
7-215
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
BND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
ONUPROFILENAME=testOnuProfile;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind ONU profile testOnuProfile to
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
BND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
ONULINEPROFILENAME=testOnuLineProfile,ONUREMOTEPROFILENAME
=testOnuRemoteProfile;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-216
Remark:
This command is used to bind ONU line profile testOnuLineProfile and ONU remote
profile testOnuRemoteProfile to Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
UBND-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;
7-217
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-218
Remark:
This command is used to unbind ONU profile form Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
RESTORE-ONUFACTORYCONF::(DID=device-id|DNAME=device-name)[,OID=onu-id]:
CTAG::;
l Operated Target Identifier
7-219
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
RESTORE-ONUFACTORYCONF::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::;
Response:
NETSH180492D1 2014-01-22 10:34:48
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to restore factory settings of Rack1/Shelf1/Slot5/Port7/ONU1
on OLT 10.63.156.26.
Command 2:
RESTORE-ONUFACTORYCONF::DID=10.63.204.101:CTAG::;
Response:
NETSH180492D1 2014-01-22 10:40:15
M CTAG COMPLD
7-220
l Notes
Point Details
l Revision History
NE NE Type Notes
Category
l Command Format
CHG-ONUUNI-PON::(DID=device-id|DNAME=device-name)[,OID=onu-id],ONU-
PORT=onu-port:CTAG::[PORTTYPE=port-type][,STATUS=status]
[,BWTEMPLATE=bw-template][,PVC=pvc][,VLANMODE=vlan-mode,PVLAN=
pvlan,CVLAN=CVLAN][,ACCESSMODE=access-mode][,IPRETRIEVEMODE=
ip-retrieve-mode]
[,ALARMNAME=alarm-name,ALARMREPORTCONTROL=alarm-report-control];
l Operated Target Identifier
7-221
l Command Parameter
7-222
7-223
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUUNI-PON::DID=10.46.41.14,OID=1-1-8-1-1,PORT=1:CTFG::STATUS=en-
able,VLANMODE=hyrbid,PVLAN=0,CVLAN=100-46/85/309;
Response:
NETSH180492D1 2012-07-03 17:54:48
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change configuration of
Rack1/Shelf1/Slot8/Port1/ONU1/ETHUNI1 on OLT 10.46.41.14. Administrative
status is set to enable, VLAN mode is set to Hybrid, PVLAN is set to 0, PVID is set to
100, and tagged VLAN 46,85 309 are bound to this port.
Command 2:
CHG-ONUUNI-PON::DID=10.46.41.157,PORT=2-1:CTFG::STATUS=enable;
Response:
NETSH180492D1 2012-07-12 08:54:48
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to enable administrative status of Slot2/Port1 on MDU
10.46.41.157.
Command 3:
CHG-ONUUNI-PON::DID=DID=10.46.41.14,OID=1-1-8-1-1,ONUPORT=1:CTFG::
PORTTYPE=VEIP,VLANMODE=Tag,CVLAN=100;
Response:
7-224
l Notes
7-225
Point Details
l Revision History
l Command Format
UPDATE-ONU-SOFTWARE::(DID=device-id|DNAME=device-name),PID=port-id:CTAG::
SWVER=software-version,ONULIST=onu-list;
l Operated Target Identifier
7-226
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UPDATE-ONU-SOFTWARE::DID=10.63.204.51,PID=1-1-5-7:CTAG::SWVER=f460914.bin,
ONULIST=1-2/7;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to update the software version of
Rack1/Shelf1/Slot5/Port7/ONU1 ONU2 ONU7 on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
7-227
l Revision History
l Command Format
CHG-ONUWIFI::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::
WIFIID=wifi-id[,CHANNEL=channel][,ADMINSTAT=admin-stat]
[,RADIOMEASENABLING=radio-meas-enabling][,ISOLATIONENABLING=isolation-enabling]
[,WORKINGMODE=working-mode][,SGIENABLING=sgi-enabling]
[,REGULATORYDOMAIN=regulatory-domain][,CHANNELBANDWIDTH=channel-bandwidth]
[,QOSTYPE=qos-type][,TXRATE=tx-rate][,TXPOWER=tx-power];
l Operated Target Identifier
7-228
l Command Parameter
7-229
7-230
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
TXPOWER=80Percent;
Response:
;
Remark:
7-231
l Notes
Point Details
l Revision History
l Command Format
CHG-ONUWIFISSID::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::
7-232
WIFIID=wifi-id,SSID=ssid,ADMINSTAT=administrative-status
[,SSIDNAME=ssid-name][,HIDEENABLING=hide-enabling]
[,ISOLATIONENABLING=isolation-enabling][,MAXUSERNUM=maximum-user-number]
[,AUTHALG=authentication-algorithms][,WEPENCRYPTENABLING=wep-encryption-enabling,
WEPKEYLEN=wep-key-length,WEPKEYFORMAT=wep-key-format,
WEPKEYVALUE=wep-key-value,WEPDEFAULTKEY=wep-default-key]
[,ENCRYPT=encrypt,PASSWORD=password,
PWDUPDATEINTERVAL=password-update-interval];
l Operated Target Identifier
l Command Parameter
7-233
7-234
7-235
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to 5 Unified Error Code Defination for more details.
l Example
Command 1:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-5-7-1,ONUPORT=1:CTAG::WIFIID=1,
SSID=1,ADMINSTAT=Enable,SSIDNAME=zte-Test;
Response:
ZTE-SH10083644D01 2013-08-30 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.156.26, and set the name to zte-Test.
7-236
Command 2:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-11-3-1:CTAG::WIFIID=1,
SSID=1,ADMINSTAT=Enable,SSIDNAME=zte-Test,AUTHALG=WpaPskAndWpa2Psk,
ENCRYPT=Aes/Tkip,PASSWORD=telsurzte1;
Response:
ZTE-SH10083644D01 2013-08-30 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This comman is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot11/Port3/ONU1
on 10.63.156.26, and set the name to zte-Test, change the desirable authentication
algorithms and assign the WPA password.
Command 3:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-11-3-1:CTAG::WIFIID=1,SSID=1,
ADMINSTAT=Enable,ADMINSTAT=Enable,SSIDNAME=zte-Test,AUTHALG=OpenSystem,
WEPENCRYPTENABLING=Enable,WEPKEYLEN=64,WEPKEYFORMAT=ASCII,
WEPKEYVALUE=12345/67890/12345/67890,WEPDEFAULTKEY=1;
Response:
ZTE-SH10083644D01 2017-05-03 11:21:12
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot11/Port3/ONU1
on 10.63.156.26, and set the name to zte-Test, change the desirable authentication
algorithms and assign the WEP password.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-237
l Applicable NE
l Command Format
CRT-ONU-MGCUSER::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id],
ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name,]
MGCPROFILENAME=mgc-profile-name[,SIGNALCODE=signal-code]
[,MEDIAPROFILENAME=media-profile-name];
7-238
l Command Parameter
7-239
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-MGCUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
MGCPROFILENAME=mgcprofile,SIGNALCODE=LoopStart;
Response:
0 2017-04-28 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU MGC user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on NE 10.63.204.51.
:
Command 2:
CRT-ONU-MGCUSER::DID=10.63.204.51,ONUPORT=1:CTAG::
ONUPROFILENAME=remote-profile,MGCPROFILENAME=mgcprofile,
MEDIAPROFILENAME=mediaprf;
Response:
0 2017-04-28 10:55:49
7-240
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU MGC user from ONU profile remote-profile
on NE 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
DLT-ONU-MGCUSER::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id],
ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
7-241
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
7-242
l Notes
Point Details
l Revision History
7-243
l Command Format
DLT-ONU-STATICROUTE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],DESTIPADDRESS=
destination-ipaddress,DESTIPMASK=destination-ip-mask;
l Operated Target Identifier
7-244
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-STATICROUTE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a static route of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 2:
7-245
DLT-ONU-STATICROUTE::DID=10.63.204.233:CTAG::ONUPROFILENAME=
remote-profile,DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a static route from ONU profile remote-profile on NE
10.63.204.233.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CRT-ONU-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILENAME=profile-name,BWTYPE=bandwidth-type[,FIXEDBW=fixed-bandwidth]
7-246
[,ASSUREDBW=assured-bandwidth][,MAXIMUMBW=maximum-bandwidth]
[,PRIORITY=priority][,WEIGHT=weight];
l Operated Target Identifier
l Command Parameter
7-247
7-248
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=Fixed,FIXEDBW=1000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE Fixed on 10.63.204.51.
Command 2:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=Assured,ASSUREDBW=2000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
7-249
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE Assured on 10.63.204.51.
Command 3:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=AssuredAndNonassured,
ASSUREDBW=2000,MAXIMUMBW=3000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE AssuredAndNonassured on 10.63.204.51.
Command 4:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=BestEffort,
MAXIMUMBW=3000,PRIORITY=1,WEIGHT=100;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE BestEffort on 10.63.204.51.
Command 5:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=All,FIXEDBW=1000,
ASSUREDBW=2000,MAXIMUMBW=3000,PRIORITY=1,WEIGHT=100;
Response:
0 2017-04-27 10:55:49
7-250
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE All on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
DLT-ONU-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILENAME=profile-name;
l Operated Target Identifier
7-251
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test;
Response:
0 2017-04-27 10:56:29
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
7-252
This command is used to delete ONU TCONT bandwidth profile test on 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Applicable NE
l Command Format
CRT-ONU-WANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name][,IPADDRTYPE=ip-address-type],
IPHOSTID=iphost-id,VLANPROFILENAME=vlan-profile-name,IPMODE=ip-mode[,
IPPROFILENAME=ipprofile-name][,IP=ip-address][,IPPREFIXLENGTH=
ip-prefix-length][,PPPOEMODE=pppoe-mode][,PPPOEUSER=pppoeuser]
[,PPPOEPWD=pppoe-pwd][,PPPOESERVICENAME=pppoe-service-name]
[,ONUIDENTIFIER=onuidentifier][,RSPPINGENABLING][,RSPTRACERSENABLING];
l Operated Target Identifier
7-253
l Command Parameter
7-254
l Response Format
7-255
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,PPPOEPWD=ztewan;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 2:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 3:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=Static,IPPROFILENAME=ipProfile,
IP=10.63.204.220,IPPREFIXLENGTH=24,RSPPINGENABLING=Enable,
RSPTRACERSENABLING=Enable;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
7-256
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is Static.
Command 4:
CRT-ONU-WANIP::DID=10.63.156.26:CTAG::ONUPROFILENAME=remote-profile,
VLANPROFILENAME=VLAN100,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a WAN IP of ONU profile remote-profile on NE
10.63.156.26.
Command 5:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPADDRTYPE=IPv6,
VLANPROFILENAME=VLAN100,IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,
PPPOEPWD=ztewan;
Response:
ZTE-SH10083644D01 2017-09-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU IPv6 WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 6:
CRT-ONU-WANIP::DID=10.63.204.232,OID=1-1-4-1-7:CTAG::
IPADDRTYPE=IPv6,VLANPROFILENAME=VLAN35,IPMODE=Static,IPHOSTID=1,
IPPROFILENAME=lzz,IP="1:1:1:1:1:1:1:1";
Response:
ZTE-SH10083644D01 2017-09-17 10:01:22
M CTAG COMPLD
7-257
l Notes
Point Details
l Revision History
l Command Format
CRT-ONUPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILETYPE=profile-type,PROFILENAME=profile-name;
l Operated Target Identifier
7-258
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPROFILE::DID=10.63.204.232:CTAG::PROFILETYPE=Line,PROFILENAME=line-profi
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
;
Remark:
7-259
l Notes
Point Details
l Revision History
l Command Format
DLT-ONUPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILETYPE=profile-type,PROFILENAME=profile-name;
l Operated Target Identifier
l Command Parameter
7-260
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
l Notes
Point Details
l Revision History
7-261
l Command Format
CHG-ONU-DMZ::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::[DMZENABLING=dmz-enabling][,IPHOSTID=ip-host-id]
[,LANHOSTIPTYPE=lan-host-ip-type][,LANHOSTIP=lan-host-ip];
l Operated Target Identifier
l Command Parameter
7-262
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-DMZ::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::DMZENABLING=Enable,IPHOSTID=
LANHOSTIPTYPE=IPv4,LANHOSTIP=13.1.1.13;
Response:
0 2017-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ONU demilitarized zone configuration of Rack1/
Shelf1/Slot2/Port1/ONU1 on NE 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
7-263
l Revision History
l Command Format
CHG-ONU-UPNP::(DID=device-id|DNAME=device-name),[PID=port-id,]OID=onu-id:CTAG::
UPNPENABLING=upnp-enabling[,IPHOSTID=ip-host-id];
l Operated Target Identifier
7-264
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-UPNP::DID=10.63.204.232,OID=1-1-4-8-2:CTAG::UPNPENABLING=Enable,
IPHOSTID=1;
Response:
0 2017-09-21 11:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
7-265
Remark:
This command is used to change the UPnP configuration of
Rack1/Shelf1/Slot4/Port8/ONU2 on 10.63.204.232.
Command 2:
CHG-ONU-UPNP::DID=10.63.204.232,OID=1-1-4-8-2:CTAG::UPNPENABLING=Disable;
Response:
0 2017-09-21 11:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the UPnP configuration of
Rack1/Shelf1/Slot4/Port8/ONU2 on 10.63.204.232.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
7-266
CRT-ONU-PORTFORWARD::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::PORTFWDID=port-forward-id[,PORTFWDSTAT=port-forward-stat]
[,PROTOCOLTYPE=protocol-type][,MAPPINGTYPE=mapping-type][,IPHOSTID=ip-host-id]
[,IPTYPE=ip-type][,LANHOSTIP=lan-host-ip][,LANHOSTMAC=lan-host-mac]
[,LANSTARTPORT=lan-start-port][,LANENDPORT=lan-end-port]
[,WANSTARTPORT=wan-start-port][,WANENDPORT=wan-end-port]
[,WANSTARTIP=wan-start-ip][,WANENDIP=wan-end-ip];
l Operated Target Identifier
l Command Parameter
7-267
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-PORTFORWARD::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
PORTFWDID=1,PORTFWDSTAT=Enable,MAPPINGTYPE=IP,LANHOSTIP=2.2.2.2,
LANSTARTPORT=2121,WANSTARTIP=3.3.3.3,WANSTARTPORT=21;
7-268
Response:
0 2017-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU port forward of Rack1/
Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
DLT-ONU-PORTFORWARD::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::PORTFWDID=port-forward-id;
l Operated Target Identifier
7-269
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-PORTFORWARD::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PORTFWDID=1;
Response:
0 2017-09-20 10:55:49
7-270
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU port forward 1 of Rack1/
Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
CHG-ONU-PON::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::[OID=
onu-id][,IPADDRESS=ip-address][,ODN=odn][,ONUNAME=onu-name]
7-271
[,USERNAME=user-name][,DESC=desc][,OMCCENCRYPT=omcc-encrypt]
[,ONUTYPE=onu-type][,UPSTREAMFECENABLING=upstream-fec-enabling];
l Operated Target Identifier
l Command Parameter
7-272
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-PON::DID=10.63.204.211,OID=1-1-5-3-1:0545::DESC=for test;
Response:
NETSH180492D1 2012-07-02 16:54:48
M 0545 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure description of Rack1/Shelf1/Slot5/Port3/ONU1 on
OLT 10.63.204.211.
Command 2:
CHG-ONU-PON::DID=10.46.41.14,OID=1-1-8-1-3:0545::ONUNAME=for
test,ODN=1-1,IPADDRESS=10.10.10.7,DESC=for tesbianbian,USERNAME=xubin;
Response:
NETSH180492D1 2012-07-02 16:55:48
M 0545 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure name, ODN ID, IP address, description and
username of Rack1/Shelf1/Slot8/Port1/ONU3 on OLT 10.46.41.14.
Command 3:
CHG-ONU-PON::DID=10.46.41.14,OID=1-1-8-1-6:0545::OID=AA-BB-11-22-33-44;
Response:
NETSH180492D1 2012-07-02 16:56:29
M 0545 COMPLD
7-273
7-274
l Notes
Point Details
l Revision History
l Applicable NE
l Command Format
LST-DEVINFO::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport-location,
ONUIDTYPE=id-type,ONUID=onu-index]:CTAG::;
7-275
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-276
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-DEVINFO::OLTID=10.63.173.78:CTAG::;
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
l Notes
Point Details
l Revision History
7-277
l Command Format
LST-BRDINFO::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=id-type,ONUID=onu_index][,BOARDID=board-name]:CTAG::;
l Operated Target Identifier
7-278
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-279
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-BRDINFO::OLTID=10.63.173.78:CTAG::;
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
7-280
totalrecord=1
l Notes
Point Details
l Revision History
l Command Format
LST-OLTATTR-PON::(DID=device-id|DNAME=device-name),(BID=board-id|
PID=port-id):CTAG::;
l Operated Target Identifier
7-281
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
l Error Code
7-282
totalrecord=1
totalrecord=8
7-283
l Notes
Point Details
l Revision History
l Command Format
LST-ONU::[ONUIP=onu-ip|OLTID=olt-name[,PONID=ponport_location[,ONUIDTY-
7-284
PE=onuid-type,ONUID=onu-index]]]:CTAG::[NAME=onu-name];
l Operated Target Identifier
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-285
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU::OLTID=10.63.194.46:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-12 13:58:10
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=11
7-286
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.46.41.12 1-1-3-1 1 – – ZTE-F821-lxd – MAC 000000000062 – – V1.2.0P3C1
10.46.41.12 1-1-3-1 2 – – ZTE-F821-lxd – MAC 000000000407 – – V1.2.0P3
10.46.41.12 1-1-3-1 5 – – ZTE-F820 10.46.41.196 MAC 08181A28F427 – –
V1.1.0P3T17
Remark:
This command is used to query ONU information on OLT 10.63.173.78.
:
Command 2:
LST-ONU::OLTID=10.63.194.46,PONID=1-1-9-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-12 14:05:57
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
list of ONU
—————————————————–
7-287
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-9-1 5 F621-RJO8JM-001 – ZTE-D402 – SN – ZTEG55262235 – –
10.63.194.46 1-1-9-1 4 – – ZTE-D420 – LOIDONCEON – 22228760002 – –
10.63.194.46 1-1-9-1 2 – – ZTE-D420 – MAC 112233445566 – – –
10.63.194.46 1-1-9-1 1 1 – ZTE-9806 100.63.204.102 SN – znx111 – –
—————————————————–
;
Remark:
This command is used to query ONU information of Slot9/Port1 on OLT 10.63.173.78.
:
Command 3:
LST-ONU::OLTID=10.63.194.46,PONID=1-1-3-1,ONUIDTYPE=ONU_NUMBER,
ONUID=1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-12 14:09:36
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-3-1 1 1 – E8-C – SN – 513542647247 – –
—————————————————–
;
Remark:
This command is used to query ONU information of Slot9/Port1 on OLT 10.63.173.78
by ONU identifier.
:
Command 4:
LST-ONU::ONUIP=10.63.204.102:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-12 14:11:01
M CTAG COMPLD
EN=0 ENDESC=No Error
7-288
totalrecord=1
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-2-1 3 wwww dddd – ZTE-9806 10.63.204.102 MAC
BBBBBBBBBBBB – – –
—————————————————–
;
Remark:
This command is used to query ONU information by management IP address
10.63.204.102.
Command 5:
LST-ONU:::CTAG::NAME=TEST_1111;
Response:
zxpon-x86-ss2 2014-03-19 14:11:40
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD SWVER
10.63.204.165 1-1-6-1 6 TEST_1111 – E8-C – SN – 313131231231 – –
10.63.194.46 1-1-12-6 1 TEST_1111 – ZTE-F622 – SN – ZTEG87655321 – –
—————————————————–
;
Remark:
This command is used to query ONU information named TEST_1111.
Command 6:
LST-ONU::ONUID=ZTEG31231231:CTAG::;
Response:
zxpon-x86-ss2 2016-05-26 14:11:40
7-289
M CTAG COMPLD
totalrecord=1
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.204.165 1-1-6-1 6 TEST_1111 – E8-C – SN – ZTEG31231231 – –
—————————————————–
;
Remark:
This command is used to query ONU information which ONUID is ZTEG31231231.
:
Command 7:
LST-ONU::OLTID=10.63.194.46,PONID=1-1-9-0:CTAG::;
Response:
ZTE_10.63.204.161 2017-04-18 14:05:57
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-9-1 5 F621-RJO8JM-001 – ZTE-D402 – SN – ZTEG55262235 – –
10.63.194.46 1-1-9-1 4 – – ZTE-D420 – LOIDONCEON – 22228760002 – –
10.63.194.46 1-1-9-2 2 – – ZTE-D420 – MAC 112233445566 – – –
10.63.194.46 1-1-9-2 1 1 – ZTE-9806 100.63.204.102 SN – znx111 – –
—————————————————–
;
Remark:
This command is used to query ONU information of slot 9 on OLT 10.63.173.78.
l Average Command Response Time
7-290
l Notes
Point Details
l Revision History
l Applicable NE
l Command Format
LST-ONUSTATE::OLTID=olt-name,PONID=ponport_location[,ONUIDTYPE=id-type,
ONUID=onu-index]:CTAG::;
7-291
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-292
l Error Code
DDOF、IIPE、EEH
7-293
l Example
No.1 Command :
LST-ONUSTATE::OLTID=10.63.173.78,PONID=1-1-14-9:CTAG::;
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
totalrecord=1
7-294
—————————————————–
ONUID AdminState OperState AUTH AUTHINFO ONUIP LASTOFFTIME
LASTOFFREASON LASTONTIME
1 UP LOS SN ZTEG00000022 – 2014-10-27 14:49:26 ONULOS 2014-10-27
14:31:27
—————————————————–
;
Remark:
This command is used to list ONU state of port 1-1-14-9 on 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::
[SERVICEPORTID=service-port-id][,DESC=desc];
7-295
OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must
MacAddress while DID or DNAME choose one between
SN/LOID/Pass- indicates the OLT PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-296
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: "Service port information of the device " + device-id
7-297
USERDE- String Hex Value: e.g. 0x8180 User Defined Ethernet Type
FETHERTYPE
l Error Code
DDOF、IIPE、EEH
7-298
totalrecord=1
7-299
totalrecord=2
totalrecord=2
7-300
l Notes
Point Details
l Revision History
7-301
l Command Format
LST-PORTQOS-PRIPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id[,ONUPORT=onu-port])):CTAG::[VIFID=virtual-interface-id|
SERVICENAME=service-name];
7-302
OID String rack-shelf-slot-port- ONU ID. It's used Required Under Certain
onu to identify the Conditions: Must
MacAddress ONU while DID choose one between
SN/LOID/Password or DNAME indicates PID and OID
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
l Response Format
l Response Parameters
Title of Response Result: Port QoS Profile
7-303
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PORTQOS-PRIPRF::DID=10.61.94.35,PID=1-1-5-2:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Profile
————————————-
DID PID OID ONUPORT COSQUEUEMAPPRF QUEUEPRF VIFTYPE VIFID
10.61.94.35 1-1-5-2 – – QUEUE_MAP_PRF QUEUE_BOLCK_PRF – –
————————————-
;
Remark:
This command is used to list QoS priority profile of Rack1/Shelf1/Slot5/Port2 on
10.61.94.35.
No.2 Command :
7-304
LST-PORTQOS-PRIPRF::DID=10.61.94.35,OID=1-1-5-2-1:5::VIFID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Profile
————————————-
DID PID OID ONUPORT COSQUEUEMAPPRF QUEUEPRF VIFTYPE VIFID
10.61.94.35 – 1-1-5-2-1 – QUEUE_MAP_PRF QUEUE_BOLCK_PRF VPort 1
————————————-
;
Remark:
This command is used to list QoS priority profile of
Rack1/Shelf1/Slot5/Port2/ONU1/VPort1 on 10.61.94.35.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-305
l Command Format
LST-PORT-MAXLEARNTMAC::(DID=device-id|DNAME=device-name),(PID=port-id|(OID=onu-id[,ON
l Operated Target Identifier
OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while Conditions:Must choose
MacAddress DID or DNAME indicates one between PID and
SN/LOID/Pas- the OLT device. OID
sword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
l Command Parameter
7-306
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
l Error Code
DDOF、IDNE、IIPE、EEH
7-307
totalrecord=1
totalrecord=1
7-308
totalrecord=1
l Notes
Point Details
l Revision History
7-309
MSAN MSAG5200/MSAG5200V3/MSAG5208/C300M
Series/C300Mv4 Series/C600 Series
l Command Format
LST-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id,ONUPORT=onu-port)):CTAG::[VINTERFACETYPE=virtual-interface-type]
[,(SVLANID=svlan-id[,CVLANID=cvlan-id]|VINTERFACEID=vinterface-id,|
(VPI=vpi,VCI=vci))][,DIRECTION=direction];
l Operated Target Identifier
7-310
OID String rack-shelf-slot-port- ONU ID. It's used Required Under Certain
onu to identify the Conditions: Must
MacAddress ONU while DID or choose one between
SN/LOID/Password DNAME indicates PID and OID
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-
64-E4
ZTEG54998768)
l Command Parameter
l Response Format
l Response Parameters
7-311
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
7-312
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – VLAN 5 – – Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of Rack1/Shelf1/Slot5/Port2
on 10.61.94.35.
No.2 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::
VINTERFACETYPE=BrgPort, VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – BrgPort – – 1 Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of
Rack1/Shelf1/Slot5/Port2/BrgPort1 on 10.61.94.35.
No.3 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
7-313
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – BrgPort – – – Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of
Rack1/Shelf1/Slot5/Port2/BrgPort(8/81) on 10.61.94.35.
No.4 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,OID=1-1-5-2-1:5::
VINTERFACETYPE=VPort, VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 – 1-1-5-2-1 VPort – – 1 Egress TEST.PRF – –
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of Rack1/
Shelf1/Slot5/Port2/ONU1/VPort1 on 10.61.94.35.
l Notes
7-314
Point Details
l Revision History
l Command Format
LST-ONUTCONT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
7-315
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU TCONT information
l Error Code
DDOF, IIPE, EEH
7-316
Command 1:
LST-ONUTCONT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2014-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=3
totalrecord=3
7-317
l Notes
Point Details
l Revision History
This command is used for querying the configuration information including ONU state,
fiber length, authorization information, etc of a certain ONU.
l Applicable NE
l Command Format
7-318
LST-ONUCFG::OLTID=olt-name,PONID=ponport_location,ONUIDTYPE=id-type,
ONUID=onu-index:CTAG::;
l Operated Target Identifier
l Response Format
7-319
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-ONUCFG::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D896:CTAG::
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-320
—————————————————–
;
Remark:
This command is used to list ONU configuration of port 1-1-14-9 on 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-OMDDM::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location[,ONU-
IDTYPE=id-type,ONUID=onu-index]][,PORTID=lanport_index][,PEERFLAG=flag]
[,FRDB=from-database]:CTAG::[CHANNELID=channel-id];
7-321
7-322
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-323
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
7-324
l Example
Command 1:
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-7-1:CTAG::;
Response:
ZTE_10.63.204.128 2014-05-07 09:53:54
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
totalrecord=1
7-325
—————————————————–
;
Remark:
This command is used to query ONU optical module DDM information from OLT.
:
Command 3:
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-6-5,PEERFLAG=true:CTAG::;
Response:
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=7
7-326
totalrecord=1
totalrecord=1
7-327
:
Command 6:
LST-OMDDM::OLTID=10.63.193.209,PORTID=1-1-19-2:CTAG::CHANNELID;
Response:
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
totalrecord=1
7-328
—————————————————–
;
Remark:
This command is used to query optical module DDM information of PON port from
OLT(supporting combo PON).
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-LANPORT::ONUIP=onu-name|(OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index])[,PORTID=port_index]:CTAG::;
l Operated Target Identifier
7-329
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-330
l Error Code
DDOF、EEEH
l Example
No.1 Command:
7-331
LST-LANPORT::OLTID=10.63.194.46:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:29:02
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
– 10.63.194.46 – – 1-1-20-1 UP Full 10000 – –
– 10.63.194.46 – – 1-1-20-2 UP Full 10000 – –
– 10.63.194.46 – – 1-1-20-3 UP Full – – –
– 10.63.194.46 – – 1-1-20-4 UP Full – – –
—————————————————–
;
Remark:
This command is used to query all the LAN port information for OLT.
No.2 Command:
LST-LANPORT::OLTID=10.63.194.46,PORTID=1-1-20-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:29:22
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-332
;
Remark:
This command is used to query the specified LAN port information for OLT.
No.3 Command:
LST-LANPORT::OLTID=10.63.194.46,PONID=1-1-9-1,ONUIDTYPE=MAC,
ONUID=11-22-33-44-55-66:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:37:09
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
– 10.63.194.46 1-1-9-1 2 1-1-1-1 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-2 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-3 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-4 UP Auto Auto – –
—————————————————–
;
Remark:
This command is used to query all the LAN port information for the ONU that has no
management IP.
:
No.4 Command::
LST-LANPORT::OLTID=10.63.194.46,PONID=1-1-3-1,ONUIDTYPE=LOID,
ONUID=56666789888,PORTID=1-1-1-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:36:22
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-333
totalrecord=16
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-1 UP Full 10M 1024 2048
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-2 UP Full 10M 0 2048
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-3 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-4 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-5 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-6 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-7 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-8 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-9 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-10 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-11 UP – – 1000 1000
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-12 UP – – 0 0
7-334
totalrecord=1
l Notes
Point Details
7-335
l Revision History
This command is used for querying the ETH performance information of the OLT uplink
port or ONU LAN port.
l Applicable NE
l Command Format
LST-LANPERF::ONUIP=onu_name|OLTID=olt_name[,PONID=ponport_location,
NUIDTYPE=id-type,ONUID=onu_index],PORTID=lanport_index:CTAG::;
l Operated Target Identifier
7-336
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-337
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command :
LST-LANPERF::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D8CB,ONUPORT=1-1-1-1:CTAG::;
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-338
l Notes
Point Details
l Revision History
l Command Format
LST-PONPERF::ONUIP=onu-name|(OLTID=olt-name,PONID=ponport_location
[,ONUIDTYPE=id-type,ONUID=onu-index]):CTAG::[CHANNELID=channel-id];
l Operated Target Identifier
7-339
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-340
7-341
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PONPERF::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D896:CTAG::;
Response:
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-342
totalrecord=1
totalrecord=1
7-343
Response:
PON001 2016-08-26 16:33:14
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
l Notes
Point Details
l Revision History
7-344
This command is used for querying the status information of the unregistered ONU.
l Applicable NE
l Command Format
LST-UNREGONU::(OLTID=olt-name[,PONID=ponport_location]|ONUID=onu-id):CTAG::;
l Operated Target Identifier
l Response Format
l Response Parameters
7-345
7-346
l Error Code
DDOF, EEEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
7-347
:
Command 1:
LST-UNREGONU::OLTID=10.63.196.165:CTAG::;
Response:
ZTE_10.63.204.161 2013-10-31 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=2
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
38-46-08-29-12-3A 38460829123A ztepon Unauth 1-1-4-4 – 2013/10/31 15:48:44
ZTE-F460
—————————————————–
;
Remark:
This command is used to query the unregistered ONU from OLT.
:
Command 2:
LST-UNREGONU::OLTID=10.63.196.165,PONID=1-1-4-4:CTAG::;
Response:
ZTE_10.63.204.161 2013-10-31 16:06:03
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=1
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
—————————————————–
;
7-348
Remark:
This command is used to query the unregistered ONU of Rack1/Shelf1/Slot4/Port4 on
10.63.196.165.
:
Command 3:
LST-UNREGONU::OLTID=10.63.204.232,PONID=1-1-4-1:CTAG::;
Response:
ZTE_10.63.204.161 2016-09-11 16:16:23
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=1
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT LOIDPWD RID
SOFTWAREVERSION CHANNELID
– 08181AD71AF8 123456 Unauth 1-1-4-1 test 2016/09/10 11:23:31 ZTE-F420
123123 – v13 1
—————————————————–
;
Remark:
This command is used to query the unregistered ONU of Rack1/Shelf1/Slot4/Port4 on
10.63.204.232(supporting LOIDPWD and etc.).
Command 4:
LST-UNREGONU::ONUID=08181AD71AF8:CTAG::;
Response:
ZTE_10.63.204.161 2016-10-17 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=2
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT DEVNAME DEVIP
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
7-349
C300v2DEV 10.63.204.233
—————————————————–
;
Remark:
This command is used to query the unregistered ONU by ONUID.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
7-350
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU Service information
7-351
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-SREVICE::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=3
7-352
totalrecord=3
l Notes
Point Details
l Revision History
7-353
l Applicable NE
l Command Format
LST-ONU-VIDEOANI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::;
l Operated Target Identifier
7-354
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU video ANI information
7-355
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LST-ONU-VIDEOANI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2015-01-15 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
7-356
totalrecord=1
l Notes
Point Details
l Revision History
7-357
l Command Format
LST-ONU-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier
l Command Parameter
7-358
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VLAN translation information
7-359
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-VLANTRANSLATION::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::PORTTYPE=Ethernet;
Response:
SH10083644D02 2015-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=3
l Notes
Point Details
7-360
l Revision History
l Command Format
LST-ONU-VPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::;
l Operated Target Identifier
7-361
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VPort information
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LST-ONU-VPORT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
7-362
totalrecord=3
l Notes
Point Details
l Revision History
l Command Format
7-363
LST-ONU-VPORTGEMPORTMAPPING::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;
l Operated Target Identifier
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VPort and GEM port mapping information
7-364
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LST-ONU-VPORTGEMPORTMAPPING::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=3
l Notes
Point Details
7-365
l Revision History
l Command Format
LST-ONUGEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
7-366
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU GEM Port information
7-367
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUGEMPORT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2014-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
7-368
totalrecord=2
;
Remark:
This command is used to query GEM Port configuration of ONU profile line-profile on
NE 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
l Revision History
This command is used for querying the information of ONU SIP user.
l Applicable NE
7-369
l Command Format
LST-ONU-SIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
[,ONUPORT=onu-port]:CTAG::;
7-370
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU SIP user information
7-371
l Error Code
DDOF, IIPE, EEH
7-372
l Example
:
Command 1:
LST-ONU-SIPUSER::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2016-09-18 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
List of ONU SIP user information
—————————————————–
ONUPORT SIPPROFILENAME USERID DISPLAYNAME USERNAME
SIGNALCODE MEDIAPFOFILE AGENTID AGENTSTAT VOICEMAILURI
VOICEMAILVALIDATION VOICEMAILUSERNAME VOICEMAILREALM
VOICEMAILSUBSEXPTIME
1 sip1 111 test1 t1 LoopStart media1 1 Connected mail.zte.com.cn Basic
mail1 – 3600
2 sip2 222 test2 t2 GroundStart media2 2 Connected mail.zte.com.cn MD5
mail2 zte.com.cn 3600
—————————————————–
;
Remark:
This command is used to query ONU SIP user information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
:
Command 2:
LST-ONU-SIPUSER::DID=10.63.196.165,OID=1-1-4-4-1,ONUPORT=1:CTAG::;
Response:
SH10083644D02 2016-09-18 10:18:14
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU SIP user information
—————————————————–
ONUPORT SIPPROFILENAME USERID DISPLAYNAME USERNAME
SIGNALCODE MEDIAPFOFILE AGENTID AGENTSTAT VOICEMAILURI
7-373
l Notes
Point Details
l Revision History
l Command Format
LST-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)
[,[PID=port-id,]OID=onu-id[,ONUPORT=onu-port]]:CTAG::
[ONUPROFILENAME=onu-profile-name][,PORTTYPE=port-type];
l Operated Target Identifier
7-374
l Command Parameter
7-375
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU port VLAN information
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
7-376
Command 1:
LST-ONUPORT-VLAN::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
totalrecord=4
7-377
l Notes
Point Details
l Revision History
l Command Format
7-378
LST-ONU-EXTENDEDVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier
l Command Parameter
7-379
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU extended VLAN information
7-380
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
7-381
;
Remark:
This command is used to query extended VLAN configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
LST-ONU-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response:
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
l Notes
Point Details
l Revision History
7-382
l Command Format
LST-ONU-EXTENDEDVLANRULE::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=
onu-id[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier
7-383
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU extended VLAN rule information
7-384
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-EXTENDEDVLANRULE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
7-385
totalrecord=1
l Notes
Point Details
l Revision History
l Command Format
LST-ONU-VOIP::(DID=device-id|DNAME=device-name)[,[PID=port-id,]OID=onu-id]
7-386
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
l Command Parameter
7-387
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VoIP Information
7-388
7-389
l Error Code
7-390
LST-ONU-VOIP::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2016-12-06 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP Information
—————————————————–
DID DNAME OID SUPPORTEDSIGNALPROTOCOL USEDSIGNALPROTOCOL
SUPPORTEDCONFMETHOD USEDCONFMETHOD H248REGMODE
ONUDOMAIN H248EQUIPMENTNAME MGCREGMODE LINENAMESN
IPALLOCATINGMODE CONFSVRADDRESS CONFSVRVALIDATIONSCHEME
CONFSVRUSERNAME CONFSVRREALM CONFSTATUS
10.63.196.165 test 1-1-4-4-1 SIP/H248/MGCP H248 OMCI/ConfFile/TR069/IETF
OMCI IPv4 testDomain
equipName Wildcard – Single 10.1.1.1 MD5 username server Inactive
—————————————————–
;
Remark:
This command is used to query ONU VoIP information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
:
Command 2:
LST-ONU-VOIP::DID=10.63.196.165:CTAG::ONUPROFILENAME=remote-profile;
Response:
SH10083644D02 2017-08-01 11:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP Information
—————————————————–
DID DNAME OID SUPPORTEDSIGNALPROTOCOL USEDSIGNALPROTOCOL
SUPPORTEDCONFMETHOD USEDCONFMETHOD H248REGMODE
ONUDOMAIN H248EQUIPMENTNAME MGCREGMODE LINENAMESN
IPALLOCATINGMODE CONFSVRADDRESS CONFSVRVALIDATIONSCHEME
CONFSVRUSERNAME CONFSVRREALM CONFSTATUS
7-391
l Notes
Point Details
l Revision History
l Command Format
LST-ONU-VOIPIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
7-392
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier
l Command Parameter
l Response Format
7-393
l Response Parameters
Title of Response Result: List of ONU VoIP IP Information
7-394
7-395
7-396
7-397
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
:
Command 1:
LST-ONU-VOIPIP::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2016-12-06 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP IP Information
—————————————————–
DID DNAME OID ONUSLOT IPALLOCATINGTYPE IPMODE IPPROFILE
VLANPROFILE HOSTID
ONUIDENTIFIER STATICIPTYPE STATICIP STATICIPPREFIXLENGTH
PPPOEMODE PPPOEUSERNAME
PPPOESERVICENAME CURRENTIP CURRENTIPPREFIXLENGTH
CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DHCPDOMAINNAME HOSTNAME MAC
RESPONDPINGENABLING
RESPONDTRACEROUTEENABLING RSENABLING ONLINKPREFIX
LINKLOCALADDRESS DHCPUNIQUEID
10.63.196.165 test 1-1-4-4-1 1 SignalAndMedia Static ippro vlanpro 1
– IPv4 10.1.1.1 24 – –
pppoesername 10.1.1.1 24 10.1.1.25 10.1.1.22
10.1.1.23 – – – Enable
Enable Disable – – –
—————————————————–
7-398
;
Remark:
This command is used to query ONU VoIP IP information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
l :
Command 2:
LST-ONU-VOIPIP::DID=10.63.196.165:CTAG::ONUPROFILENAME=remote-profile;
Response:
SH10083644D02 2017-07-19 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP IP Information
—————————————————–
DID DNAME OID ONUSLOT IPALLOCATINGTYPE IPMODE IPPROFILE
VLANPROFILE HOSTID
ONUIDENTIFIER STATICIPTYPE STATICIP STATICIPPREFIXLENGTH
PPPOEMODE PPPOEUSERNAME
PPPOESERVICENAME CURRENTIP CURRENTIPPREFIXLENGTH
CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DHCPDOMAINNAME HOSTNAME MAC
RESPONDPINGENABLING
RESPONDTRACEROUTEENABLING RSENABLING ONLINKPREFIX
LINKLOCALADDRESS DHCPUNIQUEID
10.63.196.165 test – 1 SignalAndMedia Static ippro vlanpro 1
– IPv4 10.1.1.1 24 – –
pppoesername 10.1.1.1 24 10.1.1.25 10.1.1.22
10.1.1.23 – – – Enable
Enable Disable – – –
—————————————————–
;
Remark:
This command is used to query ONU VoIP IP information of ONU profile remote-profile
on NE 10.63.196.165.
:
Command 3:
LST-ONU-VOIPIP::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
7-399
Response:
SH10083644D02 2018-12-06 10:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP IP Information
—————————————————–
DID DNAME OID ONUSLOT IPALLOCATINGTYPE IPMODE IPPROFILE
VLANPROFILE HOSTID
ONUIDENTIFIER STATICIPTYPE STATICIP STATICIPPREFIXLENGTH
PPPOEMODE PPPOEUSERNAME
PPPOESERVICENAME CURRENTIP CURRENTIPPREFIXLENGTH
CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DHCPDOMAINNAME HOSTNAME MAC
RESPONDPINGENABLING
RESPONDTRACEROUTEENABLING RSENABLING ONLINKPREFIX
LINKLOCALADDRESS DHCPUNIQUEID
10.63.196.165 test 1-1-4-4-1 1 SignalAndMedia DHCP – vlanpro 1(IPv6)
––––––––––––––––––––
–
—————————————————–
l Average Command Response Time
l Notes
Point Details
l Revision History
7-400
l Command Format
LST-ONU-IPV4IPHOST::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::[IPHOSTID=iphost-id];
l Operated Target Identifier
l Command Parameter
7-401
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU IPv4 IP host information
7-402
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-IPV4IPHOST::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2016-12-02 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
List of ONU IPv4 IP host information
—————————————————–
DID DNAME OID IPHOSTID MACADDRESS IPOPTIONS ONUIDENTIFIER IP
7-403
7-404
l Notes
Point Details
l Revision History
l Command Format
LST-OLTMACADDRESS::OLTID=olt_name[,PONID=ponport_location,ONUIDTYPE=
onuid-type,ONUID=onu-index]:CTAG::;
l Operated Target Identifier
7-405
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: list of MAC Address
l Error Code
7-406
l Example
Command 1:
LST-OLTMACADDRESS::OLTID=10.63.196.165:CTAG::;
Response:
ZTE_10.63.204.161 2013-10-31 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=3
7-407
l Notes
Point Details
l Revision History
l Command Format
LST-PORTMACADDRESS::ONUIP=onu_name|OLTID=olt_name[,PONID=ponport_
location][,ONUIDTYPE=id-type,ONUID=onu_index][,PORTTYPE=uniport_type][,
7-408
PORTID=uniport_index][,VLAN=vlan_value]:CTAG::;
l Operated Target Identifier
7-409
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
7-410
l Example
:
Command 1:
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-2-1,ONUIDTYPE=
ONU_NUMBER,ONUID=4,PORTID=1-1-1-1:CTAG::;
Response:
SH10083644D02 2012-06-25 13:58:41
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=12
7-411
totalrecord=43
7-412
100 00:24:21:76:B4:35
100 F0:7D:68:16:65:BC
100 00:22:B0:68:89:F1
100 00:19:21:22:12:B6
100 00:D0:D0:21:FF:07
100 00:1D:60:C7:98:D9
100 00:24:21:74:35:90
100 00:D0:D0:C7:06:E1
100 00:1E:73:DF:11:40
100 00:1E:90:45:8A:F3
100 00:25:11:60:14:18
100 44:37:E6:10:50:0A
100 00:00:10:09:14:01
100 00:24:7E:04:82:6F
100 00:21:97:A9:0B:4A
100 00:25:12:EE:EE:EE
100 F0:DE:F1:81:E6:3A
100 00:1B:B9:F7:51:7A
—————————————————–
;
Remark:
This command is used to query MAC addresses learnt by Slot1/ETHUNI1 on MDU
10.63.174.168.
:
Command 3:
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-3-1,ONUIDTYPE=
ONU_NUMBER,ONUID=6,PORTTYPE=WiFi,PORTID=1-1-1-1:CTAG::;
Response:
SH10083644D02 2014-09-16 10:40:11
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=5
7-413
—————————————————–
VLAN MAC
– 00:19:21:22:12:B6
– 00:1E:73:DF:11:40
– 00:21:97:A9:0B:4A
– F0:DE:F1:81:E6:3A
– 00:25:12:D2:37:C6
—————————————————–
;
Remark:
This command is used to query MAC addresses learnt by
Rack1/Shelf1/Slot3/PonPort1/ONU6/WiFiUNI1 on OLT 192.168.60.99.
:
Command 4:
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-3-1,
ONUIDTYPE=ONU_NUMBER,ONUID=6:CTAG::;
Response:
SH10083644D02 2017-04-17 10:40:11
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
list of MAC Address
—————————————————–
VLAN MAC PORTTYPE PORTID
100 00:19:21:22:12:B6 Ethernet 1-1-1-1
101 00:19:21:22:12:B7 Ethernet 1-1-1-2
—————————————————–
;
Remark:
This command is used to query MAC addresses learnt by
Rack1/Shelf1/Slot3/PonPort1/ONU6 on OLT 192.168.60.99.
7-414
l Notes
Point Details
l Revision History
MSAN MSAG5200/MSAG5200V3/MSG5208/U300/C300M
Series/C300Mv4 Series
l Command Format
LST-VLANID::(DID=device-ID|DNAME=device-name)[,OID=oid]:CTAG::;
l Operated Target Identifier
7-415
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of All Vlan ID Info"
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command:
LST-VLANID::DID=10.61.94.33:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1 vlan001
2 vlan002
3 vlan003
7-416
———————————————————————–
;
Remark:
This command is used to get all Vlan ID information of 10.61.94.33.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],OID=
onu-id:CTAG::;
l Operated Target Identifier
7-417
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU profiles of ONU binding
l Error Code
7-418
totalrecord=1
totalrecord=1
7-419
;
Remark:
This command is used to query Rack1/Shelf1/Slot5/Port7/ONU1 profile of ONU
binding on 10.63.173.78.
Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-ONUPROFILE::DID=device-id|DNAME=device-name:CTAG::
[ONUPROFILENAME=onuprofile-name];
l Operated Target Identifier
7-420
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU profile
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUPROFILE::DID=10.63.173.78:CTAG::;
Response:
SH10083644D02 2014-08-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
7-421
totalrecord=3
totalrecord=2
7-422
l Notes
Point Details
l Revision History
l Command Format
LST-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name][,IPHOSTID=iphost-id|IPV6HOSTID=ipv6-host-id
l Operated Target Identifier
7-423
l Command Parameter
l Response Format
l Response Parameters
Title of Response Result: List of ONU WAN IP information
7-424
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUWANIP::DID=10.63.194.46,OID=1-1-8-1-5:CTAG::;
7-425
Response:
SH10083644D02 2014-03-18 14:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=3
—————————————————–
;
Remark:
This command is used to query WAN IP information of
Rack1/Shelf1/Slot8/Port1/ONU5 on 10.63.194.46.
Command 2:
LST-ONUWANIP::DID=10.63.194.46,OID=1-1-8-1-5:CTAG::IPHOSTID=1;
Response:
SH10083644D02 2014-03-18 14:19:20
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
7-426
totalrecord=3
7-427
totalrecord=1
l Notes
Point Details
l Revision History
7-428
l Command Format
LST-ONU-VOIPLINESTAT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id[,ONUPORT=onu-port]:CTAG::;
l Operated Target Identifier
7-429
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VoIP line status
7-430
G729
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
7-431
LST-ONU-VOIPLINESTAT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2017-02-28 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
Response:
SH10083644D02 2017-02-28 10:16:38
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP line status
—————————————————–
—————————————————–
;
Remark:
7-432
l Notes
Point Details
l Revision History
l Command Format
LST-ONUUNI-PON::(DID=device-ID|DNAME=device-name),OID=onu-id
[,PORT=port]:CTAG::;
l Operated Target Identifier
7-433
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of ONU UNI Info"
7-434
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command:
LST-ONUUNI-PON::DID=10.46.41.2,OID=1-1-2-4-1:CTAG::;
Response:
SH10083644D02 2012-07-12 14:27:55
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
7-435
totalrecord=1
l Notes
Point Details
l Revision History
l Command Format
7-436
LST-ONU-DETAIL::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::;
l Operated Target Identifier
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU Detail
7-437
7-438
7-439
7-440
7-441
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
:
Command 1:
LST-ONU-DETAIL::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
7-442
l Notes
Point Details
l Revision History
7-443
l Applicable NE
l Command Format
LST-VLANID-TTP::(DID=device-ID|DNAME=device-name)[,OID=oid]:CTAG::
[VLANPATTERN=vlan-pattern];
l Command Parameter
7-444
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of All Vlan ID Info"
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=9
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1 vlan001
2 vlan002
3 vlan003
100 MulticastUserVLAN
101 VoIPUserVLAN
102 HSIUserVLAN
1000 MulticastServiceVLAN
7-445
1001 VoIPServiceVLAN
1002 HSIServiceVLAN
———————————————————————–
;
Remark:
This command is used to get all Vlan ID information of 10.61.94.33.
No.2 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::VLANPATTERN=Service;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1000 MulticastServiceVLAN
1001 VoIPServiceVLAN
1002 HSIServiceVLAN
———————————————————————–
;
Remark:
This command is used to get all Service Vlan ID information of 10.61.94.33.
No.3 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::VLANPATTERN=User;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
100 MulticastUserVLAN
7-446
101 VoIPUserVLAN
102 HSIUserVLAN
———————————————————————–
;
Remark:
This command is used to get all User Vlan ID information of 10.61.94.33.
l Notes
Point Details
l Revision History
l Command Format
LST-ONU-WIFI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:CTAG::;
l Operated Target Identifier
7-447
l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU WiFi information
7-448
7-449
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-WIFI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response:
SH10083644D02 2017-05-04 10:16:37
7-450
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU WiFi information
—————————————————–
DID DNAME OID WIFIID ADMINSTAT OPERSTAT RADIOMEASENABLING
ISOLATIONENABLING SGIENABLING WORKINGMODE REGULATORYDOMAIN
CHANNEL CHANNELBANDWIDTH QOSTYPE TXRATE TXPOWER
10.63.173.78 C300 1-1-2-1-1 1 Enable Enable Enable Enable Enable
802Dot11b-11g-11n China 1 40MHz Disable Auto 80Percent
—————————————————–
;
Remark:
This command is used to query WiFi information of Rack1/Shelf1/Slot2/Port1/ONU1
on NE 10.63.173.78.
l Average Command Response Time
l Notes
Point Details
l Revision History
7-451
l Command Format
LST-ONU-WIFISSID::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:CTAG::
[WIFIID=wifi-id,SSID=ssid];
l Operated Target Identifier
l Command Parameter
7-452
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU Detail
7-453
7-454
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
:
Command 1:
LST-ONU-WIFISSID::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2017-05-04 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU WiFi SSID
—————————————————–
DID DNAME OID WIFIID SSID ADMINSTAT SSIDNAME HIDEENABLING
ISOLATIONENABLING MAXUSERNUM
CURRENTUSERNUM MAC AUTHALG WEPENCRYPTENABLING WEPKEYLEN
WEPKEYFORMAT WEPKEYVALUE
WEPDEFAULTKEY ENCRYPT PASSWORD PWDUPDATEINTERVAL
10.63.196.165 test 1-1-4-4-1 1 1 Enable name1 Enable Enable 32
7-455
0 00-00-00-00-00-00 WpaPskAndWpa2Psk – – – –
– Aes/Tkip 12345678 600
—————————————————–
;
Remark:
This command is used to query ONU WiFi SSID of Rack1/Shelf1/Slot4/Port4/ONU1
on 10.63.196.165.
l Average Command Response Time
l Notes
Point Details
l Revision History
l Command Format
LST-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::[BWPROFILENAME=
bandwidth-profile-name];
l Operated Target Identifier
7-456
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
7-457
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-TCONTBWPROFILE::DID=10.63.173.78:CTAG::;
Response:
SH10083644D02 2017-09-30 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
7-458
;
Remark:
This command is used to query T-CONT bandwidth configuration on NE 10.63.173.78.
Command 2:
LST-TCONTBWPROFILE::DID=10.63.173.78:CTAG::BWPROFILENAME=T1-200M;
Response:
totalrecord=1
l Notes
Point Details
l Revision History
7-459
l Command Format
LST-ONUSIPPROFILE::(DID=device-id|DNAME=device-name):CTAG::[SIPPROFILENAME=
sip-profile-name];
l Operated Target Identifier
l Command Parameter
SIPPRO- String SIZE(1-64) SIP Profile Name Optional (If not input,
FILENAME all profiles of the NE
will be listed.)
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU SIP profile information
7-460
7-461
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUSIPPROFILE::DID=10.63.173.78:CTAG::;
Response:
SH10083644D02 2017-10-30 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error
7-462
totalrecord=2
totalrecord=1
7-463
l Notes
Point Details
l Revision History
l Command Format
7-464
LST-ONUTYPEPROFILE::(DID=device-id|DNAME=device-name):CTAG::
[TYPEPROFILENAME=type-profile-name];
l Operated Target Identifier
l Command Parameter
TYPEPROFILE- String SIZE(1-64) Type Profile Name Optional (If not input,
NAME all profiles of the NE
will be listed.)
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU type profile information
7-465
7-466
7-467
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
:
Command 1:
LST-ONUTYPEPROFILE::DID=10.63.196.165:CTAG::TYPEPROFILENAME=ZTE-F628;
Response:
SH10083644D02 2017-10-31 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU type profile information
—————————————————–
DID DNAME TYPEPROFILENAME PROFILETYPE DESCRIPTION
MAXTCONTNUM MAXGEMPORTNUM MAXMACBRIDGENUM
MAXMACBRIDGEUPLINKNUM MAXIPHOSTNUM
VEIPNUM MGCCONFMODE EXTENDEDOMCIENABLING
GISCONFENABLING SERVICECAPABILITYMODE ETHPORTNUM
POTSPORTNUM WIFIPORTNUM RFPORTNUM MAXIPV6HOSTNUM
10.63.196.165 test ZTE-F628 GPON profile
4 4 6 1 2 1 Private Enable Enable
Nto1/1toM/1toP 4 2 2 2 2
—————————————————–
;
Remark:
This command is used to query ONU type profile ZTE-F628 information on NE
10.63.196.165.
l Average Command Response Time
l Notes
Point Details
7-468
l Revision History
7.3 Alarm
【List Alarms】
7.3.1 LST-ALARM【 】
l Description
This command is used to retrieve the alarms on a NE or a board or a port or an ONU.
If no condition is specified, all alarms will be returned.
l Applicable NE
7-469
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Table Title: List of Alarm information
7-470
l Error Code
IIPF, EEH, IIAC
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ALARM::DID=10.61.94.33:CTAG::;
Response:
netsh115182d1 2006-12-20 09:22:02
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of Alarm information
—————————————————–
ALARMID ALARMDESC DID DIP DNAME DTYPE POSITION SEVERITY HAPPENTIME
ALARMTYPE DESC ENTITY_ID EVENT_CODE PROBABLE_CAUSE_DESC
PROBABEL_CAUSE_CODE SYSTEM_TYPE ACKSTATUS
1349923573173 Ems Server hard disk usage 10.61.94.33 10.61.94.33 EMS
Server(10.61.94.33) common_ems 10.61.94.33 Major 2012-10-11
10:46:12 Omc_Alarm Server 10.61.94.33, Hard disk: d:\Exceeds the monitoring
threshold. ( Utilization: 87.81%, Threshold: [Serious: 90.00%][Main: 85.00%][Minor:
80.00%][Warn: 75.00%] ) 10.61.94.33HD:d:\1004 1004 -1 6 Unacknowledged
—————————————————–
;
Remark:
This command is used to retrieve all the alarms on 10.61.94.33.
Command 2:
LST-ALARM::DID=10.63.194.46,PID=1-1-2-1:CTAG::;
Response:
netsh115182d1 2013-09-18 10:54:19
M CTAG COMPLD
EN=0 ENDESC=No Error
7-471
totalrecord=1
LST-ALARM::DID=10.63.204.232,OID=1-1-4-1-10:CTAG::;
Response:
netsh115182d1 2017-07-06 12:34:59
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
—————————————————–
ALARMID ALARMDESC DID DIP DNAME DTYPE POSITION SEVERITY
7-472
l Notes
Point Details
l Revision History
7.4 System
【Login EMS】
7.4.1 LOGIN【 】
l Description
This command is used to login EMS, after a successful TCP connection. If user
authentication function is enabled, north interface command for equipment operation
can be issued.
l Applicable NE
7-473
l Command Format
LOGIN:::CTAG::UN=user-name,PWD=password;
l Command Parameter
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
IMP, AALI, AAFD
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LOGIN:::CTAG::UN=admin,PWD=admin;
Response:
ZTE_10.63.174.210 2012-08-17 11:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error
;
l Average Command Response Time
l Notes
Point Details
l Revision History
7-474
【Logout EMS】
7.4.2 LOGOUT【 】
l Description
This command is used to logout EMS, after operation completed.
l Applicable NE
l Command Format
LOGOUT:::CTAG::;
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
AAFD
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LOGOUT:::CTAG::;
Response:
ZTE_10.63.174.210 2012-08-27 10:29:23
M 5 COMPLD
EN=0 ENDESC=No Error
;
l Average Command Response Time
7-475
l Notes
Point Details
l Revision History
【Shakehand Command】
7.4.3 SHAKEHAND【 】
l Description
If there is no communication with the TCP connection , the system will actively
disconnect the TCP connection. This command can maintain the connection without
any other operation.
l Applicable NE
l Command Format
SHAKEHAND:::CTAG::;
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
None
l Example
Command:
SHAKEHAND:::CTAG::;
Response:
7-476
l Notes
Point Details
l Revision History
7-477