Professional Documents
Culture Documents
Spare Parts
Page 1 of 4
Parts Location
Anson Ltd offer a world-wide back-up service for all its products.
In the first instance contact your local Anson stockist or Agent. If you are in any doubt whatsoever, do not
hesitate to contact our head office in Great Britain. We are only a fax or phone call away and we would be
pleased to give any assistance we can. Contact numbers can be found on the back page or alternatively visit
our web site www.anson.co.uk
When ordering spare parts it is important that the component is correctly described. From the exploded view
Fig 1 find the component and read off the part number from the table opposite. For valves not listed refer to
the documentation supplied with each valve which should include a Data Sheet that will give the description
of the components of the valve you have in your possession. If you quote this description and part number
you can be sure of being supplied with the correct item.
If the documentation is not available, quote the part number or serial number of the valve and describe the
component required.
Fig. 1
Page 2 of 4
Spare parts
Nominal 1” 2” 3”
Valve Bore Size
Minimum 0.94 1.31 1.75 2.06 2.06 2.75 3.06 3.12
Qty. Serv.
Loc. Description
Req.
2 Cap Head Bolt 1 N/A 13981 13921 13921 13921 N/A 13921* 13921* 13921*
3 Hex Head Bolt 2 N/A 13982 13920 13920 13920 13920☼ 13920☼ 13920☼ 13920☼
4 Handle 1 N/A 13974 13929 13929 13929 N/A 13929* 13929* 13929*
5 Grease Fitting 1 Std. 13934 25903 13934 13934 13934 13934 13934 13934
5 Grease Fitting 1 H2S 13934 13934 13934 13934 13934 13934 13934 13934
6 Stop Plate 1 N/A 13966 13931 13931 13931 N/A 13931* 13931* 13931*
7 Washer 2 N/A 13983 13922 13922 13922 13922☼ 13922☼ 13922☼ 13922☼
8 Adjusting Nut 1 Std. 14703 37896 14254 14254 15108 15108 15110 15110
8 Adjusting Nut 1 H2S SG13967 SG13930 SG13930 SG13930 SG15109 SG15109 SG15111 SG15111
9 Plug 1 Std. 14734 15112 14256 14782 28118 15120 15124 15124
9 Plug 1 H2S SG13965 SG15178 SG14783 SG13928 SG20359 SG15121 SG15125 SG15125
10 Insert Set 1set Std. 14806 15114 14780 14257 28119 15122 15126 15126
10 Insert Set 1set H2S SG15275 SG15176 SG28111 SG15276 SG20360 SG15123 SG15127 SG15127
11 Insert ‘O’ring 2 Std. 14955 15169 14258 14258 10021 10021 15130 15130
11 Insert ‘O’ring 2 H2S 22971 26694 27420 27420 206306 206306 400306 400306
12 Adj. Nut ’O’ring 1 Std. 10021 10959 10959 10959 15132 15132 15134 15134
12A Back up Ring 1 Std. N/A 37897 N/A N/A N/A N/A N/A N/A
12 Adj. Nut ‘O’ring 1 H2S 206306 11026 11026 11026 33163 33163 26121 26121
13 Plug Seal 2 Std. 14330 13827 13827 13827 13827 13827 13827 13827
13 Plug Seal 2 H2S 14331 13828 13828 13828 13828 13828 13828 13828
14 Roll Pin 2 N/A 13933 13933 13933 13933 13933 13933 13933 13933
15 Washer 1 N/A 13984 13923 13923 13923 N/A 13923* 13923* 13923*
16 Washer 1 N/A N/A 13924 13924 13924 15316 15316 15316 15316
24 Cap Head Bolt 3 N/A N/A N/A 15315 15315 15315 15315 15315 15315
25 Gear Operator 1 N/A N/A N/A 39459 39459 15314 15314 26080 26080
* 2 ½” and 3” Valves over 6,000 psi Working Pressure will normally use a Gear Operators and may not require
this item.
☼
2 ½” and 3” Valves over 6,000 psi Working Pressure that use Gear Operators . Quantity required is 1 off.
N/A = Not Applicable.
For valves outside of this range consult the factory quoting valve serial number and part number if known.
Page 3 of 4
Repair Kits
When re-trimming valves we would advise the purchase of repair Kits rather than individual parts. Repair kits are
supplied in two types, a ‘Seal Kit’ which includes all seals indicated in Fig. 2 or a complete ‘Repair Kit’ as
illustrated in Fig. 3.
Whenever possible when ordering quote the part number of the valve and describe the ‘Kit’ required, i.e. ‘Seal Kit’
or ‘Complete Repair Kit’. If you are unable to identify the part number of the valve ascertain the minimum bore
diameter of the through port and read off the correct ‘Kit’ part number from the tabulation below.
Nominal 1” 2” 3”
Valve Bore Size
Minimum 0.94 1.31 1.75 2.06 2.06 2.75 3.06 3.12
Type Service
Description
Seal Kit H2S SG15137 SG15172 SG14787 SG14787 SG15139 SG15139 SG15141 SG15141
Seal Kit Standard 15136 15171 14785 14785 15138 15138 15140 15140
Complete Repair Kit H2S SG15277 SG15174 SG28165 SG15278 SG27695 SG15168 SG15147 SG15147
Complete Repair Kit Standard 15142 15173 14789 14786 15144 15167 15146 15146
Flowline equipment and Valves for the oil and petrochemical industries.
ANSON FLOWLINE EQUIPMENT Inc. Texas. USA Tel: +1 713 466 9470 Fax +1 713 466 7482
ANSON OILFIELD EQUIPMENT PTE LTD Singapore Tel. +65 6214 2183 Fax +65 6214 1291
ANSON ABERDEEN Tel. +44 1224 771877 Fax. +44 1224 771848
ANSON DUBAI Tel. +97 14 8838 659 Fax. +97 14 8838663
ANSON Ltd, Queensway North, Team Valley Trading Estate, Gateshead, Tyne and Wear NE11 ONY England.
Tel: +44 191 4820022 Telex: 537936 Fax: +44 191 4878835 E mail ansongateshead@anson.co.uk
M04 issue 5
Page 4 of 4