Professional Documents
Culture Documents
Precise Application
and Improved Access
MicroMyst® Applicator
Flexible air assisted tip
provides extended access
and visibility to hard to
reach surgical sites
Application Tips:
1. Prepare application site by removing all blood clots and fluid.
2. While in surgical field, whenever anatomically possible, briefly
spray sealant on gauze and without interrupting flow move to the target site.
3. Position applicator tip 2-4 cm from the target site, depress syringes using strong, even pressure.
4. Using a continuous motion, apply an even, approximately 1-2mm thin coating of light blue hydrogel.
MicroMyst Applicator shown
Flow Regulator
The Flow Regulator provides air flow to facilitate a consistent, even spray.
Should be used only with the MicroMyst Applicator.
NOTE: Supplied pressure from N2 or compressed air source should be set between 50-200 psi.
ORDERING INFORMATION
205000DS* MicroMyst Applicator 5 units/box
MicroMyst Applicator is designed for use with DuraSeal® and DuraSeal® Exact.
CONTRAINDICATIONS: Do not apply the DuraSeal® Exact hydrogel to confined bony structures where nerves and spinal cord are present since
neural compression may result due to hydrogel swelling. The hydrogel may swell up to 12% of its size in any dimension.
Please refer to DuraSeal®, DuraSeal® Exact, and Extended Tip Applicator Instructions For Use, Indications and other important information.
MicroMyst, DuraSeal, Integra, and the Integra logo are registered trademarks of Integra LifeSciences Corporation or its subsidiaries in the United States
and/or other countries.
©2017 Integra LifeSciences Corporation. All rights reserved. Printed in the USA. 0679419-2-EN