1. Dimensions are to be read only and not A. FOUNDATION
measured · Foundation shall not rest on loose soil. If loose soil is encountered GENERAL NOTES 2. Change in dimension are to be notified at design depth, the consultant shall be informed as soon as 1. Dimensions are to be read only and not 3. The structural drawings shall be read in possible measured conjuction with architectural drawings. 2. Change in dimension are to be notified Discrepancies, if any shall be reported to the B. CONCRETE MIX 3. The structural drawings shall be read in site engineer · Concrete mix for Columnsshall be M20 [1:1.5:3] conjuction with architectural drawings. 4. Contractor shall be responsible for checking · Concrete mix for Foundation,beam and Slab shall be at minimum Discrepancies, if any shall be reported to the M20 [1:1.5:3] site engineer field dimensions and site conditions 4. Contractor shall be responsible for checking C. CLEAR COVER field dimensions and site conditions · Clear Cover of Concrete is recommended as follows 6.1 Slab 15mm 6.2 Staircase / RCC wall 20mm 6.3 Beam 25mm 6.4 Column 40mm GENERAL NOTES 6.5 Footing 50-75mm 1. Dimensions are to be read only and not measured D. LAP LENGTH./DEVELOPMENT LENGTH TO REINFORCEMENT GENERAL NOTES 2. Change in dimension are to be notified Dia [mm] Ld [mm - inches] 1. Dimensions are to be read only and not 3. The structural drawings shall be read in 8 480 19" measured conjuction with architectural drawings. 10 600 24" 2. Change in dimension are to be notified Discrepancies, if any shall be reported to the 12 720 28" 3. The structural drawings shall be read in site engineer 16 960 38" conjuction with architectural drawings. 4. Contractor shall be responsible for checking 20 1200 48" Discrepancies, if any shall be reported to the field dimensions and site conditions 25 1500 60" site engineer E. OTHERS 4. Contractor shall be responsible for checking Provide Adequate cover blocks, Chairs, stools to keep reinforcement field dimensions and site conditions in position