You are on page 1of 1

GENERAL NOTES

GENERAL NOTES 1. Dimensions are to be read only and not


1. Dimensions are to be read only and not measured
measured 2. Change in dimension are to be notified
2. Change in dimension are to be notified 3. The structural drawings shall be read in
3. The structural drawings shall be read in conjuction with architectural drawings.
conjuction with architectural drawings. Discrepancies, if any shall be reported to the
Discrepancies, if any shall be reported to the site engineer
site engineer 4. Contractor shall be responsible for checking
4. Contractor shall be responsible for checking field dimensions and site conditions
field dimensions and site conditions

5 °
BASEMENT WALL SECTION BASEMENT WALL SECTION

135
13 °
LANDING SLAB LANDING SLAB
BAR@300 mm c/c(TOP ) BAR@300 mm c/c(TOP )

BAR@300 mm c/c(bottom) BAR@300 mm c/c(bottom)

TYPICAL SECTION OF BASEMENT WALL AND LANDING SLAB CONNECTION TYPICAL SECTION OF BASEMENT WALL AND LANDING SLAB CONNECTION

You might also like