Professional Documents
Culture Documents
En GBL TSM S4X 20220920
En GBL TSM S4X 20220920
TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SEAT OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
VALVE SELECTION | EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PRESSURE/TEMPERATURE | EN (bar/°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SEATING/UNSEATING TORQUES | EN (N m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
For information on this product and other Bray products please visit us at www.bray.com
> Designed for high pressure, high temperature, and critical service applications.
> Energized resilient seat design provides bidirectional zero-leakage shutoff
throughout full pressure range.
> Dead-end service, with bidirectional sealing.
> Firesafe design available.
> Low fugitive emissions.
> Metal seated control valve available.
> Easy field maintenance.
> Low torque requirements allow smaller actuators than other comparably rated
valve types.
> Direct mounting of Bray actuators and controls provides a strong mechanical
connection and allows economical automation.
> High cycle configuration available, rigorously tested to 1 million cycles.
DISC OPENING
> Cam-action movement pulls disc away from seat.
2nd OFFSET
> Reduces seat wear. CENTERLINE
DISC
OF VALVE
OPEN POSITION
> Disc does not contact seat.
> Eliminates seat deformation.
> Reduces operating torques.
> Extends service life.
DESIGN STANDARDS
Valve Design API 609 Category B Seat Tightness Test API 598
ASME B16.34 EN 12266
ASME BPVC VIII ISO 5208
EN 593 MSS SP 61
EN 12516 Face-to-Face API 609 Category B
MSS SP 68 ASME B16.10
Top Flange ISO 5211 EN 558
Flange Drilling1 ASME B16.5 ISO 5752
ASME B16.47 NOTE
1 Additional flange drilling options available.
EN 1092-1
DESIGN FEATURES
Bray’s unique, patented resilient seat design offers many exclusive advantages:
> Proven zero-leakage shutoff in both directions. > Resilient energizer ring is fully encapsulated by the seat
> Interference-fit sealing, even when there is no differential and isolated from all line media contact.
line pressure. > Full-faced retainer secures seat in the correct position,
> Pressure-assisted sealing is energized by line media even without mating flange.
pressure, providing a tighter seal in higher differential > Seat self-adjusts for wear and temperature changes,
pressure services. providing longer service life.
> Extended service life with reliable sealing after 1 million > Simplified seat replacement.
cycles.
Disc in Open Position. Disc in Closed Position. Disc in Closed Position. Disc in Closed Position.
Seat non-compressed. No line pressure. Line pressure applied from the Line pressure applied from the
preferred flow direction. non-preferred flow direction.
Bray’s firesafe design consists of the standard bidirectional resilient seat assembly Bray’s Inconel® metal seat provides
with added Inconel® metal seat. With the valve closed, the firesafe seat assembly bidirectional FCI 70-2 Class IV leakage.
contacts the disc with both the resilient seat and metal seat. During and after a The seat and nitride hardened disc have
fire, when the resilient material has been partially or completely destroyed, the appropriate differences in hardness
metal seat provides a bidirectional seal by remaining in contact with the disc. to eliminate the risk of valve damage
caused by galling.
No line pressure. Line pressure applied from Line pressure applied from Disc in Closed Position.
(Pre-fire event condition.) preferred flow direction. non-preferred flow direction, No line pressure.
(During or after fire event.) (During or after fire event.)
SERIES 40/41/4A
Up to 285 psi (19.6 bar)
SERIES 42/43/4B
Up to 740 psi (51 bar)
SERIES 44/45
Up to 1440 psi (100 bar)
Select one code from each category to build a complete valve order number.
4X-XXXX-110XX-XXX
Select one code from each category to build a complete valve order number.
4X-XXXX-110XX-XXX
PARTS CALLOUT
25 21
20
19
24 18
17
16
23 15
13
3 12
11
10
2
1
4
22
6A
32
6B
26 27 26 31
Firesafe and
metal seated
valve only.
Sizes ≥ NPS 14 (DN 350)
NOTES
> Material specifications provided for reference only, and are subject to change without notice.
> Additional materials available upon request.
1 May require pressure rating to be reduced. Contact Bray for more information.
2 RTFE is supplied by Bray as RPTFE (reinforced polytetrafluoroethylene.)
3 Firesafe and metal seated valve only.
4 Used in high cycle configuration.
NOTES
> Material specifications provided for reference only, and are subject to change without notice.
> Additional materials available upon request.
1 May require pressure rating to be reduced. Contact Bray for more information.
2 RTFE is supplied by Bray as RPTFE (reinforced polytetrafluoroethylene.)
3 Firesafe and metal seated valve only.
4 Used in high cycle configuration.
400
PRESSURE/TEMPERATURE
300 | ASME (psi/°F)
-62°F
-20°F
300
200
ASME CLASS 150 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
-62°F
-20°F
400 LEGEND (psi/°F)
200
WORKING PRESSURE (psi)
100
Carbon Steel,
300 ASTM A216 Gr. WCB
100
0
-100 0 100 200 300 400 500 600 700 800 900 1000
Stainless Steel,
-62°F
-20°F
100
PTFE
0 TFM
-100 0 100 200 300 400 500 600 700 800 900 1000
TEMPERATURE (°F)
800
ASME CLASS 300 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
800 LEGEND (psi/°F)
600
WORKING PRESSURE (psi)
Carbon Steel,
ASTM A216 Gr. WCB
-62°F
-20°F
600
400
Stainless Steel,
-62°F
-20°F
400 TFM
0
-100 0 100 200 300 400 500 600 700 800 900 1000
TEMPERATURE (°F)
200
ASME
0
CLASS 600 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
-100 0 100 200 300 400 500 600 700 800 900 1000
1600 LEGEND (psi/°F)
WORKING PRESSURE (psi)
Carbon Steel,
1600 ASTM A216 Gr. WCB
1200
Stainless Steel,
-62°F
-20°F
RPTFE
-62°F
-20°F
1600
800
400
PTFE
1200
400 TFM
0
-100 0 100 200 300 400 500 600 700 800 900 1000
-62°F
-20°F
800
TEMPERATURE (°F)
0
-100 0 100 200 300 400 500 600 700 800 900 1000
400
NOTES
1 The Firesafe design is limited to the same pressure/temperature rating as the resilient seat material.
0
2 The Inconel ®
seat used in the metal seated design is limited to the same pressure/temperature rating as the body material.
-100 0 100 200 300 400 500 600 700 800 900 1000
20
PRESSURE/TEMPERATURE | ASME (bar/°C)
24
16
-52°C
-29°C
ASME
20 CLASS 150 | RESILIENT SEATED | FIRESAFE | METAL SEATED
12
1 2
24
16
8 LEGEND (bar/°C)
WORKING PRESSURE (bar)
-52°C
-29°C
20
12
4 Carbon Steel,
ASTM A216 Gr. WCB
16
8
0
-100 0 100 200 300 400 500 Stainless Steel,
-52°C
-29°C
0 TFM
-100 0 100 200 300 400 500
TEMPERATURE (°C)
60
ASME
50 CLASS 300 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
60
40 LEGEND (bar/°C)
WORKING PRESSURE (bar)
-52°C
-29°C
50
30 Carbon Steel,
ASTM A216 Gr. WCB
60
40
20
Stainless Steel,
-52°C
-29°C
40 RPTFE
20
0
-100 0 100 200 300 400 500
-52°C
-29°C
30
10
PTFE
20
0 TFM
-100 0 100 200 300 400 500
10 TEMPERATURE (°C)
0
-100 0 100 200 300 400 500
ASME CLASS 600 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
120 LEGEND (bar/°C)
WORKING PRESSURE (bar)
120 RPTFE
80
40
-52°C
-29°C
100
60
20 PTFE
80
40
0 TFM
-100 0 100 200 300 400 500
-52°C
-29°C
60
20 TEMPERATURE (°C)
40
0
-100 0 100 200 300 400 500
20
NOTES
1 The Firesafe
0 design is limited to the same pressure/temperature rating as the resilient seat material.
-100 ® seat used0in the metal seated
2 The Inconel 100 design is 200 300 pressure/temperature
limited to the same 400 500
rating as the body material.
10
12 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
PN10
8
12
10 LEGEND (bar/°C)
WORKING PRESSURE (bar)
0
4 RPTFE
2
-100 0 100 200 300 400 500
2
0 PTFE
-100 0 100 200 300 400 500
0 TFM
-100 0 100 200 300 400 500
TEMPERATURE (°C)
20
PN16 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
20
16 LEGEND (bar/°C)
WORKING PRESSURE (bar)
20 Carbon Steel,
16
12 1.0619/1.0843
-52°C -52°C -52°C
-29°C -29°C -29°C
16
12
8 Stainless Steel,
1.4408
12
8
4 RPTFE
8
4
0 PTFE
-100 0 100 200 300 400 500
4 TFM
0
-100 0 100 200 300 400 500
0 TEMPERATURE (°C)
-100 0 100 200 300 400 500
25
30 Carbon Steel,
1.0619/1.0843
20
30
25
Stainless Steel,
-52°C -52°C -52°C
-29°C -29°C -29°C
1.4408
15
25
20
10 RPTFE
20
15
5
15 PTFE
10
0
10
5 TFM
-100 0 100 200 300 400 500
5
0 TEMPERATURE (°C)
-100 0 100 200 300 400 500
0
-100 0 100 200 300 400 500
NOTES
1 The Firesafe design is limited to the same pressure/temperature rating as the resilient seat material.
2 The Inconel® seat used in the metal seated design is limited to the same pressure/temperature rating as the body material.
25
-52°C-52°C
-29°C-29°C
30
45 LEGEND (bar/°C)
WORKING PRESSURE (bar)
20
25
40
15
20
Carbon Steel,
35 1.0619/1.0843
10
15
30
5
10 Stainless Steel,
25
-52°C
-29°C
1.4408
0
5
20
-100 0 100 200 300 400 500
0
15 RPTFE
-100 0 100 200 300 400 500
10
PTFE
5
0 TFM
-100 0 100 200 300 400 500
TEMPERATURE (°C)
PN63
70 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
70
60 LEGEND (bar/°C)
WORKING PRESSURE (bar)
60
50
Carbon Steel,
1.0619/1.0843
50
40
-52°C-52°C
-29°C-29°C
70
40
30 Stainless Steel,
60 1.4408
30
20
50 RPTFE
20
10
40
-52°C
-29°C
PTFE
10
0
30
-100 0 100 200 300 400 500
0 TFM
20
-100 0 100 200 300 400 500
10
TEMPERATURE (°C)
0
0 -100
100 200 300 400 500
PN100 | RESILIENT SEATED | FIRESAFE1 | METAL SEATED2
120
100 Carbon Steel,
1.0619/1.0843
100
80
Stainless Steel,
-52°C-52°C
-29°C-29°C
80
120 1.4408
60
60
100 RPTFE
40
40
80 PTFE
20
-52°C
-29°C
20
60 TFM
0
-100 0 100 200 300 400 500
0
40 TEMPERATURE (°C)
-100 0 100 200 300 400 500
20
0
-100 0 100 200 300 400 500
NOTES
1 The Firesafe design is limited to the same pressure/temperature rating as the resilient seat material.
2 The Inconel® seat used in the metal seated design is limited to the same pressure/temperature rating as the body material.
STEM DETAILS
E
H H
ØA 1
ØC 2
ØG ØG
J J
STEM DETAILS
H H
E
ØG ØG
ØL
J J
ØC2 ØA1
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
H H
ØA 1
ØC 2
ØG ØG
J J
D
STEM WITH STEM WITH
FLATS KEYWAY
≤ NPS 8 ≥ NPS 10
L
B
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
E
H H
ØL
ØG ØG
ØC2 ØA1
J
J
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
ØA1 ØC2
H H
ØG ØG
J J
L
B
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
E
H H
ØA1 ØC2 ØG ØG
J J
D
STEM WITH STEM WITH
FLATS KEYWAY
≤ DN 300 ≥ DN 350
L
B
STEM DETAILS
E H H
ØL ØG ØG
ØC2 ØA1
J J
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
H H
ØA1 ØC2
ØG ØG
J J
D
STEM WITH STEM WITH
FLATS KEYWAY
≤ DN 200 ≥ DN 250
L
B
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
ØL H H
ØC 2
ØA 1
ØG ØG
J J
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
E
H H
ØG ØG
ØA1
ØC
2
J J
L
B
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
E
H H
ØA1 ØC2 ØG ØG
J J
D
STEM WITH STEM WITH
FLATS KEYWAY
≤ DN 300 ≥ DN 350
L
B
STEM DETAILS
E H H
ØL ØG ØG
ØC2 ØA1
J J
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
H H
ØA1 ØC2
ØG ØG
J J
D
STEM WITH STEM WITH
FLATS KEYWAY
≤ DN 200 ≥ DN 250
L
B
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
ØL H H
ØC2
ØA 1
ØG ØG
J J
NOTE
> For sizes not shown, contact Bray for more information.
STEM DETAILS
E
H H
ØG ØG
ØA 1
ØC2
J J
L
B
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> Valve orientation to media flow
affects torque. Values are presented
for upstream and downstream
orientations.
FLOW FLOW
UPSTREAM DOWNSTREAM
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> Valve orientation to media flow
affects torque. Values are presented
for upstream and downstream
orientations.
FLOW FLOW
UPSTREAM DOWNSTREAM
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> Valve orientation to media flow
affects torque. Values are presented
for upstream and downstream
orientations.
FLOW FLOW
UPSTREAM DOWNSTREAM
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
> For sizes not shown, contact Bray for more information.
NOTE
1 Based on stem material 17-4 PH stainless steel, ASTM A564 Type 630 H1150D.
> For sizes not shown, contact Bray for more information.
NOTE
1 Based on stem material 17-4 PH stainless steel, ASTM A564 Type 630 H1150D.
> For sizes not shown, contact Bray for more information.
NOTE
1 Based on stem material 17-4 PH stainless steel, ASTM A564 Type 630 H1150D.
> For sizes not shown, contact Bray for more information.
NOTES
> Cv varies with the valve size, angle of opening and the manufacturer’s valve style.
> Cv value is the volume of water in USGPM that will flow through a given restriction or valve opening with a pressure drop of one (1) psi at room
temperature.
> For sizes not shown, contact Bray for more information.
NOTES
> Kv varies with the valve size, angle of opening and the manufacturer’s valve style.
> Kv value is the volume of water in cubic meters/hour (m3/hr) that will flow through a given restriction or valve opening with a pressure drop of
one (1) bar at room temperature.
> For sizes not shown, contact Bray for more information.
NOTES
> Kv varies with the valve size, angle of opening and the manufacturer’s valve style.
> Kv value is the volume of water in cubic meters/hour (m3/hr) that will flow through a given restriction or valve opening with a pressure drop of
one (1) bar at room temperature.
> For sizes not shown, contact Bray for more information.
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
IMPORTANT INFORMATION
> Double flange style bolting not shown.
> Refer to appropriate Bray dimensional drawings for specific valve
drilling information.
> Pipe flange thickness may vary, therefore no stud/bolt lengths are stated.
CAUTION
> Lug threads may be tapped from both sides, and therefore tap may not Tapped holes at
be continuous. neck locations
do not permit
> Minimum bolt engagement must be equal to the diameter of the bolt. through-holes.
> When bolting the valve into the line, use standard bolting torque as
recommended by applicable piping standards. Additional force from
the flange bolts is not required.
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
SEAT RETAINER
GASKET GASKET
RAISED FACE (WHEN APPLICABLE) RAISED FACE (WHEN APPLICABLE)
IMPORTANT INFORMATION
> Double flange style bolting not shown.
> Refer to appropriate Bray dimensional drawings for specific valve
drilling information.
> Pipe flange thickness may vary, therefore no stud/bolt lengths are stated.
CAUTION
> Lug threads may be tapped from both sides, and therefore tap may not Tapped holes at
be continuous. neck locations
do not permit
> Minimum bolt engagement must be equal to the diameter of the bolt. through-holes.
> When bolting the valve into the line, use standard bolting torque as
recommended by applicable piping standards. Additional force from
the flange bolts is not required.
HEADQUARTERS
Bray International, Inc.
13333 Westland East Blvd.
Houston, Texas 77041
Tel: +1.281.894.5454
All statements, technical information, and recommendations in this bulletin are for general
use only. Consult Bray representatives or factory for the specific requirements and material
selection for your intended application. The right to change or modify product design or
product without prior notice is reserved. Patents issued and applied for worldwide.
Bray® is a registered trademark of Bray International, Inc.