Professional Documents
Culture Documents
CHK ADJ: Periodic Check and Adjustment
CHK ADJ: Periodic Check and Adjustment
8. Set the control lever 2 2 to the full retard 11. Install the throttle link rod and connect
position, and then check that the adjust- the throttle cable.
ing screw 6 comes in contact with the
crankcase.
2 Checking the gear shift operation
6 1. Check that the gear shift operates
smoothly when shifting from “N” to “F” or
“R”. Adjust the shift cable if necessary by
turning the cable joint.
N
F R
R
F
68830280
68830340
9. Check that the mark b on the flywheel
magnet is aligned with the pointer 4 on
the pulser coil assembly. 2. Set the gear shift to “N” position.
2
3 1
68830290
a 4 68830356
3-13 6885J11