Professional Documents
Culture Documents
Product Features
◆Ambient temperature:-40℃~60℃.
Class P
Application
DESCRIPTION
LSV-150 series is constant voltage led driver, designed for lighting used for landscape illumination. The driver
has built-in active PFC, multiple protections, and 10KV surge immunity. it's a excellent design with high
reliability and long lifetime. 12V / 24V / 36V / 48V output voltage.
MODELS
Power Factor
Max Output Output Voltage Output Current Output Typical
Model Number
Power(W) Range (Vdc) Range (A) Mode Efficiency
115Vac 230Vac
Notes:
All performance parameters are measured at 25℃ambient temperature, 230VAC input, full load conditions, except for
those specified
Page1 / 9
LSV Series -150W Constant Voltage LED Driver
INPUT SPECIFICATIONS
- - 0.75mA 277Vac/50Hz
Leakage Current
OUTPUT SPECIFICATIONS
- - 1S 115Vac,100% load
Turn-on Delay Time
- - 0.5S 230Vac,100% load
Page2 / 9
LSV Series -150W Constant Voltage LED Driver
GENERAL SPECIFICATIONS
Efficiency @115Vac
Vo=12V 89% 90%
89% 90% Measured at full load and 25℃ambient
Vo=24V temperature
Vo=36V 89% 90%
Vo=48V 89% 90%
Efficiency@230Vac
Vo=12V 89% 90%
89% 91% Measured at full load and 25℃ambient
Vo=24V temperature
Vo=36V 89% 91%
Vo=48V 89% 91%
Efficiency@277Vac
Vo=12V 89% 90%
89% 91% Measured at full load and 25℃ambient
Vo=24V temperature
Vo=36V 89% 91%
Vo=48V 89% 91%
Input-Output - 3750Vac -
Dielectric
Input-PE - 1600Vac - 10mA/60S
Strength
Output- PE - 1600Vac -
Input-Output,Input-PE,Output-PE,500Vdc/60S/25℃/
Insulation Resistance 100MΩ - -
70%RH
MTBF - 200000 Hours - 230Vac,80% load (MIL-HDBK-217F)
230Vac&100% load,60℃case temperature, refer to
Lifetime - 50000 Hours -
lifetime VS Tc curve for details
OperatingCaseTemperat
-40℃ - +85℃
urefor Safety Tc_s
OperatingCaseTemperat
-40℃ - +70℃
urefor Warranty Tc_w
Storage Temperature -40℃ - +85℃ Humidity: 20% to 95% RH
SAFTY STANDARDS
Page3 / 9
LSV Series -150W Constant Voltage LED Driver
EMC COMPLIANCE
NOTE:
This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it
depends also on the other devices connected to the driver and on the fixture itself.
Page4 / 9
LSV Series -150W Constant Voltage LED Driver
Derating Curve
100
115Vac
80
60 230Vac
Load(%)
40
20
0
-40 -20 0 20 40 50 60 70
Ambient Temperature(℃ )
100
80 50℃
Load(%)
60
40
20
0
90 120 150 180 210 240 270 300 330
Input Voltage(V)
Page5 / 9
LSV Series -150W Constant Voltage LED Driver
LIFETIME VS CASE TEMPERATURE
Life vs.Tc
300
250
200
Life(KHours)
150
100
50
0
30 40 50 60 70 80 90 100
Tc(° C)
EFFICIENCY VS LOAD
LSV-150B012 LSV-150B024
LSV-150B036 LSV-150B048
Page6 / 9
LSV Series -150W Constant Voltage LED Driver
POWER FACTOR VS LOAD
1.000
0.985
0.970
Power Factor
0.955
0.940
0.925
0.910
0.895
0.880
0.865
0.850
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Load Proportion
50
45
40
35 115VAC
THD(%)
30
230VAC
25
20 277VAC
15
10
5
0
50% 60% 70% 80% 90% 100%
Load
PROTECTIONS
Parameter Notes
Over Temperature Protection When the Tc is over 90℃, the driver shuts off automatically and enters protection status.
Short Circuit Protection The input power shall decrease when the output rail short, the power supply shall not be
damaged.
Over current protection The product will enter hiccup status when 1.1-1.5 maximum load current applied to the output,
and the product shall be self-recovery when the fault condition is removed.
When the output voltage is over 1.1-1.3 Rated Load Voltage, the driver shuts off automatically
Over Voltage Protection and enters protection status, the driver will work normally after fault condition removed and AC
input reapply.
Page7 / 9
LSV Series -150W Constant Voltage LED Driver
MECHANICAL OUTLINE
LSV-150B012&LSV-150B024 types
INPUT
OUTPUT
Brown Red
Y/G
Blue Black
LSV-150B036&LSV-150B048types
Output Wire
DC PUTOUT
H05RN-F 2x1.0mm2
Brown
H05RN-F 3x1.0mm2
Brown Blue
Y/G
Blue
AC INPUT
IR REMOTE
Page8 / 9
LSV Series -150W Constant Voltage LED Driver
REVISION HISTORY
Description of Change
Version Date Notes
Before Now
Page9 / 9