PNEUMATIC PISTON CYLINDER ACTUATOR
PLD & PLS SeriesINTRODUCTION
PNEUMATIC PISTON CYLINDER ACTUATOR PLD & PLS Si
s
‘SUSIN I-TORK range PLDS series Piston Actuator designed for powerful, high performance application in
ON/OFF or controlling for the Knife edge and Gate valve automation. The Cylinder Range is from 8 inches to
25 inches.
A Suitable solution for your Globe Control Valves because of its higher thrust capability, stiffness, precision
movernent and higher frequency response.
The Bore size starting from 200mm up to 630mm and the thrust force from 2500Ibf up to 27000Ibf in case
of double acting at 60psi (4 bar). In the case of single acting it depends upon selection of spring
Manual override by Hydraulic cylinder or Gear boxes in case of smaller sizes. The Pneumatic accessories such
as Limit switch, Solenoid valve and Positioner can be provided,FEATURES
General Features
Operating Pressure of 150psi (10.3 Bar) 1 Cylinder Materials are Cast Stee, if needed
permitting substantially higher thrust can be provided in SS and Aluminum.
capabilities than Diaphram actuators.
End cover material with Cast ron and
Il Tighter valve Shutoff due to higher thrust & optionally provided carbon steel
Offers ease of maintenance.
Less weight, ood corrosion resistant material construction.
Responds quickly to signal changes because
(of Double Acting configuration. 1 For Custom built thrust and stroke consult the factory
NBR seals are standard, special seal available
on request
Preece
et ee ae oe
Field reversible application is applicable from
rear etic
Oe eee ns
nee eee
CONSTRUCTION
Guide Bush Two Piston Guide Rod Piston Seal Ring
PTFE Bush for the To Prevent the Piston
Piston which gives better abrasion and increases the life
Durability also has self of piston,
for smooth operation at the Minimizing Piston
wear for long life
lubricating characteristics
low pressure aspects.
span.
Spring Tie Bolt
End7 offers excellent
A toughness, High tensile
Strength, Vibration and shock
resistance,
Used in single acting cylinder to compress
the spring. There is no need of any special
Equipments to compress spring.MATERIALS
Spring Return Linear Piston Actuator Spring Return Linear Piston Actuator
(Fail close) (Fail Open)
TTeMNo. | PART NUMBER DESCRIPTION ay SLNO, | PARTNUMBER MATERIAL ay
1 | cvunver weass HorcHRowum | 4 + | cvunoer’ aio5as3 HoT CHROMIUM | 1
PLATED) LATED)
2_| piston ‘ALUMINUM 25) 1 2_[ piston “ALUMINA U25) i
a__| Pistonzoo 276 TYPE 304) 1 a_| Piston Roo 278 (TYPE 304) 1
4 _[ToreNocover | oucTne RON 1 4 DUCTILE IRON 1
| sorrowenocover | OUCTILEIRON 1 5 DDUCTLEIRON 1
6 _| sorromsuss PFE 1 &_| sorromause FIFE 1
7 | meR00 ‘NI 1040 (ENG 4 7_ | TeRoo 711080 ENG) 4
@__| tes ‘NST 1040 ENG) 2 | meso ‘AS 040 (EN) 2
@ | PistoxcuoeRon | ssioe 2 9 | Pisrowcuneroo | ssaoe 2
70__| patowcuoenoo bien | FIFE 2 i0|_| PsTowGume Roo BUSH | FIFE 2
a | vow cs 1 at | YOKE cs 1
2 _ | secre 138 1 12_| spacer 8 1
13 | srorperwaster | a6 1 13_| sTopreR wast 18 1
4_| seane eu 1 4_| sPaNG eM 1
15 | FaSTENeRs HIGHTENSLE 86 GRADE 15 | FASTENERS HIGH TENSILE 88 GRADE
76 _| FUNGEORNG Ne 2 6 | FNGEORNG Na z
a7_| sortowaussone | nar 4 17 | sorromausHoRNe | new ‘
18 _| Pistonane Nek 1 18_| PIsToNRING NBR, 1
1 _| seaLene Gi 1 19_| SeALRING oT 1
2% | GuDEBARORNG | NER 5 20 | cuoesARoRNG | NER i
21 _[euoesusioane | nar 8 2 [cunesusHorne | NeR aTECHNICAL DATA
Single Acting PLS Series
The below spring return piston actuator, spring thrust values are only
for reference, the cylinders can be built according to the application
requirements.
Dad | fe maint et path
“ au a aa ‘START ED ‘START ‘END ‘START END
swiss | 2
wm |v am | am
ro | ame | mn | cane | ame
Pe
wons-sn | os
oon | se reson | 20s
vn | om | comm | stsuo | anon | ama | ano | tamm
ven | a0 ian aa) | pas |e
we [se | ews | cso | ono | amin | waen | naam
woms-m | | oor | aw | rex | za | ama | cam |) moms | amas
ro | se res ees
oor | sm | sero | sano | ise | sanm | mma | i520
wor | am | wo | ams | ammo | ammo | anouo | come
sons | | oo | om | msm | wm | ome | ome | aan | nome
| eu | se | cea [eran | asa | eso0a | repos
wa | om | sma | ame | ua | ume | aanm | zane
a as vemsn |Double Acting PLD Series
a ae Awre
os ont a es
a
sd na (| |
a | |
7 [|e a
oo) oe ee
Be sure of adding safety factor Given values after friction losses
DIMENSIONS
GENERAL DIMENSIONS
PLD-DOUBLE ACTING DIMENSION DETAILS
F
gaunt | as | 8 || o | oc | werror | o | wow
0200 230+S, 150+S 50 M27 32, 12" 226 SQ 4-14
aso | zaoes | te0rs | so | war | | ve | 25080 | 416
9300 270+S: 150+S 50 M27 32 112" 335 SQ 4-18
0350 280+S: 175+S 50 M30, 40 1/2" 367SQ 4-20
aeo | soos | ves oo [we [ae [aa | mesa | az
oas0 | sioes | 1755 | so | a2 | 50 | se | a7osa | 24
0480 320+S: 200+S: 50 M42 55 3/4" 600 RND 8-18
2530 3404S, 200+S: 50 M46 60 3/4" 650 RND 8-20
sao | ss0es | 200-5 | oo [we | os [aa | rion | te20
NOTE: 'S' DENOTES STROKE FOR EACH MODEL, ‘N' DENOTES NO OF TIE RODS
END COVER ON BORE #200 TO 9430 PLDS, MODELS ARE IN SQUARE, ALL DIMENSIONS ARE IN MMACCESSORIES
Positioner:
Reliable performance and outstanding,
durability under harsh working
environments through robust valve
control devi
Internal View
Output Pressure Gauge
Supply Pressure Gauge
Zero Adjusting Screw
Terminal Box
Torque Motor
Features:
Precise calibration with simple SPAN and
ZERO adjustments
M % split range available
Vibration resistant design Stainless steel
gauges standard
Restricted pilot valve orifice kit for small
actuators included
Certified for ATEX Eex md B TS (05 ATEX
1076X) by NEMKO in conformance with
EN 50014:1997, EN 50018:2000 &
EN 50028:1987
Certified for EMC (K1046 / E04) in
conformance with EN 61000-6-2:2001 and
EN 61000-6-4:2001 by RWTUV
MEN 61000-6-2:2001 & EN 61000-6-4:2001
by RWTUV
Certified for Ex md B T6 (99-1075-Q1),
Exmd C16
M (2000-1057-Q1), and Ex ia BT6
(2000-1056-Q1) by KOSHA
Construction
‘Temperature Range: -40 deg C to 60 deg C
Pressure: 1.5 to 10 Bar
Various types of Positioner are:
Electro Pneumatic Positioner (Linear/Rotary)
Pneumatic - Pneumatic Positioner (Linear/Rotary)
s. ‘Smart Positioner
‘Auto/Manual Screw
Pilot valve Stopper Screw
Seat Adjuster
Span adjusting Screw
Body Feedback Lever
Other Accessories:
Filter Regulator
Gauge Port Size %” %” NPT
Air media
Filtration 5 micron
Gauge Port Size Re 1/8
Housing material: Aluminum.
Pressure Gauge will be in SS
Solenoid Valve
‘Our Next generation solenoid valves
specifically engineered to pilot
Pneumatic Process valve actuators,
with improved design and added
valuable features.
ae
Non NAMUR Standard mounting
Weather Proof IP65
CE Certified
ATEX Ex Series
Intrinsically safe series
Electrical
Voltage ((+/-10%): 12 VDC & 24 V DC, 24VAC, 120V AC
& 240VAC, 50/60 Hz (Other Voltages on request)
Response: 30ms (on) 40 ms(off)Susin I-Tork (India) Pvt. Ltd.,
TPE eRe ger RC Re ee eC MCR
AS UE eee eee Lee LU are ere erry
Ce eee A eR
Soares e Col PR eo)
Providing sales and technical support ensuring identical customer experience wherever you are in the world.
fate aC} I-TORK Control Pty, Ltd, | Susin Qatar Trading WLL_ | Susin I-tork ME FZC
Gyeonggi-Do, Korea | Perth, Western Australia | Doha, Qatar SUS
Ne a ec ac ee ea