2. Briefly explain 2 types of condensation 3. Differentiate between drop-wise and film-wise condensation 4. Explain, how non-condensable gases affect on rate of condensation? 5. List out the assumptions made for analyzing condensation on vertical tube/plate 6. Write a short-note on condensation of mixed vapors 7. Explain the concept of “pool boiling” Module 4: (All questions for 5 marks each) 1. Related to thermal radiation, explain, “transmissivity, absorptivity and reflectivity”. 2. Write the meaning of “opaque body”, “perfectly white body”, “grey body” and “perfectly black body” 3. Derive/ write and explain any one law of black body radiation 4. Write a short note on “radiation shield” and prove that, when ‘n’ number of radiation shields (having same emissivity as that of original radiating planes) are inserted in between 2 original radiating planes, then, = + Module 5: (All questions for 5 marks each) 1. Give general classification of heat exchangers on different basis 2. Write a short-note on double pipe heat exchangers (only construction features and general aspects; design equations are not expected.) 3. Explain the concept of (i) tube pitch (ii) baffles and (iii) tie rod used in shell and tube heat exchanger 4. Differentiate between “single pass shell and tube HEx" and “multi-pass shell and tube HEx" 5. Write the thumb rules followed during allocation of fluids in shell and tube heat exchanger 6. Write a short note on “fixed tube sheet type shell and tube heat exchanger” 7. Write and explain the formulae for “effectiveness”, “capacity ratio” and “NTU” of heat exchanger