This document summarizes the analysis of the bearing capacity of a cast in situ pile with a diameter of 20 inches and length of 15 meters. Based on the average N-value along the length of the pile, the end bearing capacity is calculated to be 7225 KN. The ultimate bearing capacity is calculated to be 1912 KN. With a factor of safety of 2.5, the allowable bearing capacity is 76 tons. For a column load of 400 tons, 6 piles would be required.
This document summarizes the analysis of the bearing capacity of a cast in situ pile with a diameter of 20 inches and length of 15 meters. Based on the average N-value along the length of the pile, the end bearing capacity is calculated to be 7225 KN. The ultimate bearing capacity is calculated to be 1912 KN. With a factor of safety of 2.5, the allowable bearing capacity is 76 tons. For a column load of 400 tons, 6 piles would be required.
This document summarizes the analysis of the bearing capacity of a cast in situ pile with a diameter of 20 inches and length of 15 meters. Based on the average N-value along the length of the pile, the end bearing capacity is calculated to be 7225 KN. The ultimate bearing capacity is calculated to be 1912 KN. With a factor of safety of 2.5, the allowable bearing capacity is 76 tons. For a column load of 400 tons, 6 piles would be required.